Universal machining center

DMG MORI DMU 60evo

Condition: used, Year of construction: 2012, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Travel: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B-axis swivel range -5° to +110° C-axis 360° Maximum loading weight: 400 kg, direct measuring systems including table cooling Dynamics package: linear drive on X / Y axes Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active cooler for main spindle, linear drive, and table Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm HSK-A63 according to DIN 69893 • Tool magazine: chain magazine with 60 tool stations • Tool length measurement and breakage control: Blum Z-Nano Gjdpsyc Tthjfx Afnjtu • Scraper belt chip conveyor with cleaned slotted sieve, internal coolant supply (IKZ) paper filter 40 bar 231 l/min, 600 l tank including rotary viewing window, sealing air for linear systems, bed flushing • Blowing air through spindle center selectable via M function, maintained air with low oil content • Electronic handwheel • Spray gun for chip flushing • Extended chip flushing system • Laminated safety glass panels for working area door and side window • Operating mode 4 • High speed settings • Measuring probe: Blum HSK-A63 • Prepared for 3D QuickSet • Optionally oil mist extraction unit • New spindle at 25,800 spindle hours

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Gsdpfx Aow Ht Ibefnotu Function tested and cleaned Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, overall weight: 10,000 kg, PREMIUM LISTING – DMG MORI DMU 60 eVo (2017) | 5-Axis | TNC 640 | 120 Tools | Automation-Ready | 40 bar Gedpfsygky Tex Afnotu Overview Offered for sale is a high-specification DMG MORI DMU 60 eVo 5-axis machining centre, Made in Germany, equipped with a robust configuration suitable for demanding production requirements. The machine is automation-ready, making it ideal for lights-out manufacturing and future integration of pallet or robotic systems. Key Highlights • Year: 2017 • Control: Heidenhain TNC 640 (ERGOline® Control, 19” screen) • 5-axis NC swivel rotary table (B-axis -5° to +110°, C-axis 360°) • 120-position tool magazine • High-speed spindle up to 18,000 rpm, SK40 BIG-PLUS • Automation-ready + extended M65 interface • DMG MORI geometric inspection protocol available Configuration & Options (as equipped) Control / Software / Operation • Heidenhain TNC 640, ERGOline® Control, 19” display • Operating mode 4 – process monitoring in production • Electronic handwheel 5-Axis Table / Measuring • NC swivel rotary table 600 × 500 mm • B-axis -5° to +110°, C-axis 360° • Max load: 400 kg • Direct measuring systems (rotary axes) • Renishaw OMP60 optical infrared probe Spindle / Tooling / Magazine • Spindle interface: SK40 BIG-PLUS 18,000–20,000 rpm 35 kW (40% ED) / 25 kW (100% ED) • Tool magazine: 120 positions (chain magazine with double gripper) • Tool breakage detection TRS2 (contactless detection; suitable for small diameters) Coolant / Chip Management / Enclosure • Internal coolant supply (IKZ), 40 bar (paper band filter tank 600 L) • Chip conveyor • Extended chip flushing (additional flushing of work area) • Chip wash gun • Spindle centre air blast (selectable via M-function, conditioned air with low oil content) • Rotating safety window (rotating viewing pane) • Oil & emulsion mist separator (mechanical) • Automation Ready • Extended M65 interface Connectivity / Service • DMG MORI Messenger (installation kit for machine connection) • DMG MORI Netservice client (remote diagnostics support via external PC)

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm z-travel 500 mm Gtodpfx Aoycxinofnju total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Gtodjx Atyajpfx Afnju

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 24,000 rpm, operating hours of spindle: 17,917 h, number of slots in tool magazine: 60, Equipment: rotational speed infinitely variable, Machine Description: - Universal 5-axis milling machine with linear drives in the X and Y axes, achieving 80 m/min traverse speed - Spindle and machine geometry in excellent condition - Regularly serviced - Last spindle replacement: 08/2020 / New control panel installed: 09/2025 - Current machine hours: Power ON: 58,985 h / Spindle ON: 17,917 h - Machine location: Lower Austria (near Vienna) Travel paths: X-axis (longitudinal): 600 mm Y-axis (cross): 500 mm Z-axis (vertical): 500 mm Clamping Table / Work Area: Integrated NC rotary table: 600 x 500 mm Table load capacity: 400 kg CNC Control: Heidenhain iTNC530 Spindle: Speed range: 24,000 rpm Tool interface: HSK63 Coolant System and Chip Disposal: External coolant with 3 nozzles: 4 bar Internal coolant: 40 bar Paper band filter Chip conveyor, scraper belt design Automatic Tool Changer: Tool interface: HSK63 Number of tool pockets: 60 Dimensions and Weight: Machine: Length 2,900 x Width 2,611 x Height 2,865 mm Weight: approx. 9,800 kg Additional Equipment and Accessories: Gtedpfeya U Ibsx Afneu › Heidenhain TS 649 probe › Heidenhain handwheel › Blum laser for tool measurement on the table › Chip flushing gun › 3D Quick Set › ATC cycle package › Operating mode 4 › Integrated oil mist extraction › Operating manual / documentation › Dynamics package for linear drive, 80 m/min, incl. active cooler

Condition: excellent (used), Year of construction: 2018, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, Gtjdpfx Aewnpzajfnou C axis 0.001 degrees Rapid feedrates 80m/min, 120 station toolchanger, spindle taper HSK 63 spindle speed 20,000rpm, Siemens 840D eRGOline control Swarf conveyor. Through Spindle Coolant

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 390 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 1,300 mm, bar passage: 65 mm, total height: 2,700 mm, total length: 7,000 mm, total width: 3,000 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Manufacturer: DMGMORI Type: CTXbeta1250TC Year of manufacture: 2008 (retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - automatic tool changer - swivel head as B-axis - belt filter system with internal cooling and chip conveyor - differential pressure clamping main/counter spindle - workpiece collection device - preparation for bar loader (optionally available) Technical data: Max. turning diameter 500 mm Gedpfx Afsubyv Renetu X-axis 450 mm Y-axis 100 mm Z-axis 1300 mm B axis 220 ° Spindle bore 65 mm Speed 5000 rpm Spindle power 34 kW Counter spindle speed 6000 rpm Counter spindle passage 52 mm Counter spindle power 20 kW Tool changer 24 B-axis mount HSK 63 B-axis spindle speed 12000 rpm B-axis power 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant device: Yes Internal coolant supply: Yes Options: · Full cabin · NC swivel head as B-axis · Coolant device and chip conveyor · Documentation · Geometrically within the new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer's tolerance for new machines - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) renewed - sliding plates overhauled - hoses and cables overhauled, drag chains revised - cabin doors repainted, viewing windows renewed - maintenance carried out according to manufacturer's specifications

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, DMG-Mori DMU 60 Evo Linear Control: Heidenhain ITNC 530 HSCI NC swivel rotary table 600 mm x 500 mm B-axis swivel range: -5° to +110° C-axis 360°, including table cooling Spindle speed: 20 - 24,000 rpm, HSK 63 A Tool magazine with 120 positions Infrared measuring probe Renishaw OMP 60 Gsdpfx Afexvhtnjnetu Dynamic package, Laser tool measurement ICS with 40/80 bar, with paper band filter 980 l, chip conveyor Electronic handwheel, 3D Quickset ATC, programmable coolant nozzles via M-function Operating mode 4 Tropic package

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. Gjdpfxjxgnz Ts Afnjtu The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Gtodpfx Asfk Et Aefnou Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Gtedpfxowp Ic Es Afnju Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Rapid traverse 80m/min Speed 20-14,000 rpm Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Documentation