Turn-Mill Centre

MORI SEIKI NL 2500 SY/700

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,517 h, General Data Godpfx Aox D Hrfeayekf Measurements width 2000 mm Measurements depth 3100 mm Measurements height 2120 mm Machine weight 6200 kg Main Drive Number of spindles 2 Spindle speed range 4000 Spindle bore 91 mm Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement 100 mm (±50) Y-Axis Rapid Traverse 10000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Workpiece Workpiece drm over bed 923.8 mm Workpiece drm over support 755 mm Tools Number of station 12 Media Ar supply 5 bar / 100 L/min This 5-axis DMG Mori Seiki NL2500SY/700 was manufactured in 2008, featuring a swing diameter over bed of 923.8 mm and a maximum turning diameter of 366 mm. It offers a rapid traverse rate of 30,000 mm/min for X/Z/B axes and a main spindle speed up to 4,000 min⁻¹. Ideal for complex turning tasks, consider the opportunity to buy this DMG Mori Seiki NL2500SY/700 turn-mill center. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg Godswfynfopfx Aayekf 1x chip conveyor 1x tray Pictures coming soon

Condition: good (used), Year of construction: 2008, Control: MSX 850 / MAPPS III B-axis WORKING AREA Swing diameter over cross slide: 755 mm Max. turning diameter: 366 mm Max. turning length: 705 mm Travel: X = 260, Z = 795, Y = 100 (± 50) mm Travel of sub spindle (B-axis): 734 mm MAIN SPINDLE Max. speed: 4,000 rpm Max. bar diameter: 80 mm Spindle bore: 91 mm SUB SPINDLE Max. speed: 6,000 rpm Max. bar diameter: 80 mm TURRET Number of tool stations: 12 Max. driven tool speed: 6,000 rpm Gsdpfsx Dli Aex Aayekf Chip conveyor KNOLL filter FKA/500

Condition: excellent (used), Year of construction: 2011, operating hours: 17,813 h, functionality: fully functional, turning length: 700 mm, turning diameter over cross slide: 750 mm, turning diameter: 366 mm, spindle motor power: 26 W, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, mount diameter: 12 mm, rotational speed (max.): 6,000 rpm, Make Mori-Seiki Moderl NL 2500SY/700 Year of manufacture 2011 Control system MXS 850 IV Gkedpfswtfwhox Aayef Data: Max Swing over bed 755 mm Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Y 100 +-50 mm Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 Gkjdpfx Aev Dxw Reaysf SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: used, Year of construction: 2014, For sale: 1 CNC lathe Spinner TTC 300, year of manufacture 2014, including single bar loader. The machines are in very good condition, have been serviced regularly, and are ready for immediate use. Gsdpfx Aajw Rbb Ajyjkf

Condition: excellent (used), Sub-spindle, C-axis FANUC 18i-TB control Gsdpfx Aaowufdqoyekf Turning diameter max 300mm Turning length -366mm Spindle speeds main spindle 30-5000 rpm Spindle speeds sub spindle 30-6000 Turret head: 12 driven positions C-axis Dividing 0.001 degrees Misc. accessories MARCELS MASCHINEN CH

Condition: like new (used), Year of construction: 2011, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 157 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 464 mm, rotational speed (max.): 6,000 rpm, total height: 1,885 mm, total length: 3,675 mm, total width: 2,258 mm, overall weight: 9,000 kg, CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464,8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Number of lower turrets: 1 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Part catcher Workarea light Bar Loader ILS - RBK Machine running time: Nominal Kva: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Gkedpfxsxiwnns Aayjf Height mm: 1.885 Weight kg: 9.000

Condition: excellent (used), Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, NEW ARRIVAL 1 CNC MILLING MACHINE HERMLE C 600V, Year 2006 CNC CONTROL: HEIDENHAIN ITNC 530 TRAVEL PATHS: 600 x 450 x 450 mm - INFINITELY VARIABLE SPINDLE SPEED UP TO 10,000 RPM - MACHINE WITH ELECTRONIC HANDWHEEL - PROBE - APPROX. 30 TOOL HOLDERS - COOLANT SYSTEM - FIXED TABLE, ETC. PRICE ON REQUEST plus 19% VAT, ex location, unpacked, uninsured Technical data as per attachment, non-binding - errors and prior sale excepted. Delivery: immediately – subject to prior sale. Payment: strictly net, immediately upon receipt of invoice, before removal/collection. Gkedpfx Asxf Huvoaysf We are happy to show you the machine under power by arrangement, demonstrating all functions.

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Various tool holders Gedowmzhpjpfx Aayskf