Scie multilames

MITEK CYBER SAW

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Gjdpfx Ajwuppwefnotu Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: excellent (used), Year of construction: 2013, feed length X-axis: 13,000 mm, saw blade diameter: 800 mm, working length: 13,000 mm, Equipment: safety light barrier, We are offering this very well-maintained Hundegger K2i-625 (UF5) joinery machine, year of manufacture 2013. Fully automatic wood infeed with feed roller conveyor and loading & infeed transporters Under-table swiveling crosscut saw 11 kW Universal 4-axis milling unit (UF4) Combined support for vertically operating tools Drilling unit 2.2 kW – drilling direction vertical Combined support for horizontally operating tools Drilling unit 2.2 kW – drilling direction horizontal Fully automatic hydraulic beam turning station Transport and positioning system "two-hand operation" incl. machine frame Electronic control with EKP software Refined machine surface Gtedpfxsx Trllo Afnsu Extension of the cross conveyor and feed roller conveyor for timber lengths up to 13 m 5-axis universal milling unit – UF5 (surcharge for 4-axis) Drilling unit 2.2 kW – drilling direction horizontal Front marking unit (operator side) InkJet 4 HP system on the stop side Remote maintenance (incl. portable video camera) Control unit for waste removal with operating buttons Extension of roller conveyor on the output side Spare saw blade 800 mm Dovetail cutter 60x3 Bx16, 5 mm (with reversible blades) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 11470, functionality: fully functional, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Gtjdpfx Aowhpavsfneu

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: cabin, crane, Baljer & Zembrod Gtsdov Tk I Hspfx Afnsu OBX IV Reach 13.30m Load capacity 2500kg at 13.0m

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Gtjdpfxjxftalo Afnsu Videos show the machine in operation.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Recycled board end-cutting machine. Utilization of recycled board Gtsdpfx Afourmqdenju

Condition: excellent (used), Year of construction: 2004, Hundegger K2-5 five-head carpentry center. The machine is in perfect condition after service without backlash. Possibility to see it live during operation. Please contact me Gedowrd R Rjpfx Afnotu

Condition: excellent (used), Year of construction: 2015, operating hours: 3,200 h, For sale: Weinmann WBZ 160/13 Powersix joinery line, year of manufacture 2015, in very good condition. The system was operated exclusively for our own joinery production. Inspection by appointment. Gtedpfx Aexclhcsfnju

Condition: good (used), Year of construction: 2010, functionality: fully functional, Weinmann Butterfly Turning Table Gtsdpfsxdm H Asx Afnsu Dimensions per table: 12.0m x 3.20m 1 fixed table with pneumatic clamps and extendable counter-clamps 1 movable table with longitudinal transport rollers incl. cable trays and floor rail Fully functional. Immediately available, partially already dismantled.

Condition: excellent (used), Hundegger K2 Industry 5-Axis CNC Timber Joinery Machine Gtsdpfxex U Ti Us Afneu 5-axis machining capabilities – Maximum machining section: 300 x 620 mm Machining operations: Section probe detector, section measurement – Cutting: All straight cuts and any angle, horizontal and vertical, birdsmouth, valley and hip rafters, rebates, half-lap joints, chamfering, groove, straight and angled birdsmouth groove, web notch – Milling with aggregate head (hogging head) and other milling cutters, mortise and tenon, mortises, notches, scarf joints, dovetail joints (straight and angled), Gerber scarf – Drilling: straight and angled, deep-hole drilling – 1x side drill and 1x underside drill. Ink marking system – Piece identification labelling Control console and software: The control system allows importing data from CAD software and automates the calculation of complex machining operations. Work is currently performed with CADWORK software (not included in the sale of the machine). The machine features a pit designed for the elimination of wood waste and sawdust. This HUNDEGGER K2 CNC is fully upgraded and refurbished! Dimensions: - Machine: Length 22,900 mm x Depth 5500 mm x Max. height 2550 mm (on the floor) - Waste pit: approx. Length 12,000 x Width 2,400 x Depth 950 mm - Timber feeding length: 13,000 mm - Max. timber output length: 13,000 mm - Transverse infeed conveyor: 5 chains, 2,200 mm - Extendable timber support table - AQF feed chain with shaft extension, 2,900 mm - Under-table pivoting crosscut saw - Right-hand safety flap Waste evacuation system located below – Control for waste extraction system – Universal 5-axis milling unit with profiling tool, dovetail cutter, multiple finger joint cutter, combined vertical tool holder, drilling unit, finger joint cutter, combined horizontal tool holder, rebate unit / Drilling unit 1 and 2 – Marking device – Pneumatic beam turn-over station – Outfeed table with 7 arms Year of manufacture: 2003 Purchased by current owner in 2020. Machine was fully reconditioned in 2020: electrical, mechanical, pneumatic, tooling, and IT systems (dismantling parts and motors, replacement of bearings, hoses, cables, guideways, IT update and EKP data export, cleaning, new tooling in 2020) The machine is in very good technical and visual condition.