MEYER paint drying chamber 17m3

Meyer AB 17 m3

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator Ppjdowdawqopfx Acvjp The machine has no door It worked on a cake

Condition: new, Year of construction: 2025, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm Ppodpfxsvk Saxs Acvjp • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: used, Power generator, emergency power generator, generator, power generator, power generator, emergency power generator Ppedpfxjdparys Acvjp -Power: 3 kW -Engine: Briggs & Stratton -Sockets: 2 x 220 V lighting current -Dimensions: 820/620/H460 mm -Weight: 60 kg

Condition: used, Number of boring spindles 10 St. Working width 230 mm Working height 160 mm Pjdpow H Iv Tjfx Acvjpp Feed motor 5,5 kW Feed speed 6-36 m/min.

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm cutting height 100mm Podsucnukspfx Acvepp Total connection 39kW

Year of construction: 1993, condition: good (used), functionality: fully functional, machine/vehicle number: RH 241-1-50-30v, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Ppjdpspy Eygefx Acvjp Fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Stainless Steel. Used! Good condition! Podpfx Ashck S Escvspp Inlet: 6" - Outlet: 6"

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Drying chamber Make: Mühlböck Type: ZLSM Year of construction: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans each 3 kW 10 measuring points With frequency converter With control system Heating power 223 kW Water temperature 85 °C Water quantity 14 m³/h Voltage 230/400 Volt Connected load 12 kW Fans 3 x 3 kW Control program MB Intellevent 5000 Pjdpfxowr Tzfj Acvopp

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: Pedpfx Acswp Rqfovjpp • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2011, condition: good (used), Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Ppodpfx Acsvu Hvpevop Type of temperature control: West 6400 external dimensions: width: 430cm length: 330cm height: 300cm weight: ca 4800kg