Bandsaw - Horizontal

MEP SHARK 382-1 SXI EVO

Condition: new, MEP SHARK 382-1 SXI EVO metal band saw Hydraulic semi-automatic. MEP dealer - please send us your inquiry motor power 1,5 / 1,8 kW Bench opening 385 mm belt dimensions 3770 x 27 x 0,9 mm weight 695 kg Speed 40/80 m/min. cutting area 0° 300 / 250x250 / 380x250 cutting area 45° right 260 / 250x250 / 300x200 Cutting area 45° left 240 / 210x210 / 280x160 Cutting area 60° right 180 / 170x170 / 200x170 Cpedog Hzxiopfx Afneu Cutting area 60° left Description Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical posts. 420 mm rotary table on roller bearing with preloaded thrust bearing and interchangeable steel inserts. Double belt speed (40/80 m/min.).

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Cpjdpfxerb Afae Afnju Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 300 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 200 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW dimensions of the machine ca. 1647 x 2157 mm weight 720 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Cpodpfx Asxaax Dofnou * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) Cpedpfxjt Nhqyo Afnsu MAXIMUM CAPACITY 16 TON

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Cpodpfjkvnumjx Afnju Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, Used CMA drilling center Type: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Cpedpfx Aewc Ndwefnju Automatic tool changer Year of manufacture: 2008

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 2,500 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, quill diameter: 100 mm, year of last overhaul: 2025, The machine is in very good technical condition after modernization in 2025, connected and available for testing. Heidenhain iTNC 530 control system. Accessories: tools, clamping angles, workpiece probe. Cjdpfoxz E N Dox Afnopu

Condition: new, The 40 MP is a single-head saw with top-down cutting action, featuring a saw blade diameter of ø 400 mm. Comparable to Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. The saw table can be manually adjusted to an angle of +/- 45°. The saw head can be manually tilted from 0° to 45° outwards. Cpodpfx Aferfapaensu The 40MP single-head saw is equipped with horizontal clamping cylinders for secure profile clamping, minimal spray lubrication, and mechanical protection of the sawing area. Please also see our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.

Year of construction: 2011, condition: excellent (used), IWN Crusader Crate / Utensil / Tunnel Washer Year 2011 All Stainless steel Power wash and rinse system with digital adjustable temperature controller Chemical dosing facility for wash and rinse system Gas fired burner with reset facility Complete with extractor fan and ducting Cpodpfx Afsgqutcsnju In excellent working condition, ready for use.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts Cedpfx Aefg E Hlsfnopu 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise