Sanding machine

MB Fentech Zwischenschliff

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) Kdjdpfx Asia Tauoldot - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Year of construction: 2012, condition: good (used), Medium-pressure conveying system for wood chips approx. 4 tons per hour Conveying line originally 180 m, 150 mm, partially available Air flow rate approx. 2,350 m³/h Motor power Three-phase motor according to IEC 55 kW Degree of protection IP54 1 Housing made of high-quality gray cast iron, equipped with two axis-parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helically toothed precision control gears, each mounted in roller bearings. Drive via V-belts, with the two pulleys and the associated high-performance narrow V-belts, as well as a protective cover. 1 Drive unit with motor mounting rails, shaft connection with easy-to-assemble taper-lock clamping sleeves, completely mounted on a common base frame. 1 Combined intake filter silencer (absorption silencer) Kedpfx Alsb Uyizedjdt 1 Resonance absorption pressure silencer, designed as a base frame 1 Base frame 1 Pressure valve 1 Check valve 1 Elastic connecting sleeve with clamps 1 Manometer 1 Set of vibration isolators with mounting screws 1 Electrical pressure monitoring consisting of a pressure transmitter and a display device, as well as an electrical output signal 1 Sound enclosure made of galvanized sheet steel with an oil collection tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, fan wheel driven by the blower shaft. Sound enclosure for outdoor installation.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. Kdodpfx Aljwzmcbodst • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Kdedpjxzpwlefx Aldst Pneumatic pressers Adjustment stops 380V

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Kdodpfxjgiwl Dj Aldet Available immediately

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 Kjdpfsvnv Uhjx Aldsdt with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Kodpjwgnz Nefx Aldodt Control cnc

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps Kjdpfx Ajnbd Rrsldjdt -No assembly required - ready to go - Paint booth wall - fully barred Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: -Riello 40G20 oil burner -Heating time 10 -15 min dkm3db -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,422 h, load capacity: 2,500 kg, lifting height: 3,170 mm, fuel type: electric, mast type: telescopic, construction height: 2,275 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical Condition: Very good Front Tires Type: Superelastic Kodpfxoyncqge Aldsdt Front Tires Size: 23x9-10 Rear Tires Type: Superelastic Rear Tires Size: 18x7-8 Battery Voltage: 80V Battery Capacity: 620Ah Battery Manufacturer: GNB Battery Type: PzS Battery Year: 2019 Description: In addition to this unit, we offer a wide range of forklifts and warehouse equipment. All our machines are workshop-inspected and comply with FEM 4.004 safety standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are happy to buy your used equipment, even if you do not purchase a machine from us. Hire purchase and financing on attractive terms available on request. We are pleased to offer professional advice on all our vehicles. Features: Sideshift, Fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, interior mirror, windscreen wiper, single-pedal control, LED, seat,

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t Kdjdpfx Ash Hrvfjldst +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++