Vertical machining center

Mazak VTC-200B

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: Ljdey S Sw Sjpfx An Uoab • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader • CE compliant machine • Side chip conveyor preparation • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: excellent (used), Kolbus casing in with joint forming by Smyth After general renovation at GM Gross. Still in production Format / size 100x125mm - 260x350mm Book block thickness / Book block thickness 4-60 mm capacity from 500 -800 blocks per hour Lsdjwm E Rnjpfx An Usab

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included Lajdpfxjw Rm Dij An Ujb X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Mazak, controller model: Mazatrol M640, workpiece length (max.): 2,820 mm, workpiece width (max.): 655 mm, workpiece height (max.): 640 mm, workpiece weight (max.): 800 kg, table width: 510 mm, table length: 1,460 mm, overall weight: 6,100 kg, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 110 mm, tool weight: 18,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Mazak VTC 200B in very good condition for sale. The machine is fully operational and can be inspected under power at any time. TECHNICAL SPECIFICATIONS: Work Table: Table size 510 x 1,460 mm Max. table load: 800 kg Travel distances: X-axis 1,120 mm, Y-axis 510 mm, Z-axis 510 mm Rapid traverse speed: X/Y/Z-axis 30 m/min Feed rate: 1 - 8,000 mm/min Distance spindle nose to table: 180~690 mm Working spindle: Speed range 40 - 10,000 rpm Tool holder: CAT 40 Main drive power: 15 kW Max. torque: 98 Nm Tool magazine: Number of tool stations 30 Max. tool diameter: 80 mm (110 mm with adjacent station empty) Max. tool length: 350 mm Max. tool weight: 8 kg Lajdpfx Ansy Rarne Ueb Machine data (standard configuration): Total connected load: 22.7 kVA Machine weight, approx. 6,000 kg Machine dimensions (L x W x H), approx. 3.00 x 2.90 x 2.80 m

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Laodpfxeyyybho An Ueb Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2000, operating hours: 10,974 h, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Fusion 640 M, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, overall weight: 6,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, tool weight: 8,000 g, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information. - Distance Table Surface to Spindle Nose: 180-690 mm- Spindle Taper: SK 40 CAT- Max Tool Diameter: 80 mm (110 mm with free adjacent pockets)- Max Tool Length: 350 mm- Accessories/Features: EIA/ISO programming, Automatic tool length measurement system, Synchronous tapping, 3 free M functions, 1 complete set of manuals- Working Hours (Servo X-Axis): 76,203 hours- Working Hours (Spindle): 75,952 hours Additional equipment Lasdjyaaw Ujpfx An Usb • chip conveyor is included Machine Benefits Qualitative Machine Benefits • 2019: new spindle motor and spindle, recirculating ball screws in x and y axes • 2024: new recirculating ball screw in x axis due to a material defect. Technical Machine Benefits • Rapid traverse: 30 m/min • Workpiece: Automatic Tool Changer (ATC), Capacity: 24 positions • Tools: coolant pump: 5-bar • Tools: internal and external cooling Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2004, MAZAK VTC 200B II, year 2004 X axis: 1120 mm Y axis: 510 mm Z axis: 510 mm Spindle: max. 12,000 rpm SK40 Through-spindle coolant (IKZ) Table length: 1460 mm Table width: 510 mm Table load: 800 kg Tool changer: 30 positions Laodeylnxkspfx An Ueb Spindle power: 18.5 kW Spindle speed: 12,000 rpm Tool changer: 30 positions IKZ: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling system: Yes

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION Laedexlum Tepfx An Ujb - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 34143 [h] - Number of working hours : 26657 [h] - Number of spindle hours : 15552 [h] EQUIPMENT - CNC : Fanuc 30i-model A - HFT (High Frequency Turning) - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : FMB turbo 3-26 / 3200 A

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 163341, Country of manufacture: UK Voltage: 400V 3-phase AC 50/60Hz, max 58A Dimensions: 200x260x250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis: 560 mm Lodpfx Answ T Tp Rj Ujab Y-axis: 410 mm Z-axis: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900x410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance from floor to table surface: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: free choice of station number; automatic bi-directional search Tool holder: MAS BT-40 Max. tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max. tool weight: 8 kg Max. magazine load: 120 kg Max. tool length: 350 mm Tool change time: 2.9 s (chip-to-chip) Lubricant tank: 1.8 L Feed lubricant tank: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min Subject to errors or omissions, all technical specifications are provided without guarantee.

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table Laedpjun Rqgsfx An Usb BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €