Veneer saw with planing unit

Mayer FSK

Condition: good (used), Year of construction: 1987, max. cutting length: 4200 mm with rear support featuring a movable stop with front support Gkedextwylspfx Afisd Required space: 6.7 x 1.2 m

Condition: excellent (used), Veneer saw Front support table Pneumatic pressure beam control Rear table consoles with angle stop Suction channel Cutting length 4200 mm Cutting height approx. 50 mm Motor power 3.0 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 5800 x 1350 x 1200 mm Advise used machines: - Technical data without obligation, mistake and intermediate sale reserve. Gkjdpfevbzpkex Afied - Price is considered ex-location price - All articles or machines are bought as seen without any entitlement on warranty. - It is left to the choice of the buyer to view the machines before at its location. - Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 1981, functionality: fully functional, cutting height (max.): 3,000 mm, table length: 3,000 mm, - pneumatic clamping beam - cutting length 3000 mm - front support table - rear support table with stop Gkjdpfx Ajw Hlxljfiod - 2.2 kW motor

Condition: used, Year of construction: 1985, with großer cut length 3500 mmused, good conditionmanufactured by Mayertype FSKbuilt in 1985 or 2,2 kWcut length 3500 mmsaw blade diameter ca. 180 mmpneumatic clampingrip fence with hand wheel adjustablefront extented tablerear extented tableveneer strip fence with stop fingerexhaust ductpneumatic service unitexhaust connection D 100 mmrequired space ca. l x w x h mm4400 x 1200 x 1300weight ca. 600 kgtotal connected power ca. 2,2 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Gsdpfxovwf Uvo Afiokd

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area 31,2 m² RH 3500 mm fan 5,5 kW diam. 250 mm on 300 x 240 mm Brackets Feet Cover and filter bags Gkjdpfx Afsiamtpoied Unfortunately, we cannot answer inquiries without complete contact information.

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Gjdpfx Aow U D U Hofiekd

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Gjdpfx Ajvwf Agjfiokd

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 600 mm, OPTIMIZATION CROSS-CUTTING SYSTEM WITH ROTATING SAWING UNIT CT600 / 6000 max. blank length 6,000 mm Cutting dimensions unit position A At 0° 200x215, 50x370 mm At 30° 200x185 mm, 50x325 mm At 45° 200x150 mm, 50x265 mm At 80° 200x35 mm, 50x63 mm Cutting dimensions unit position B At 0° 160x315, 40x400 mm At 30° 160x270 mm, 40x350 mm At 45° 160x220 mm, 40x285 mm At 80° 160x52 mm, 40x70 mm Min. workpiece thickness 10 mm (with automatic feeding 20 mm) Support table inclined at 8° Slider stop side on the right Technical data saw unit: Aggregate completely rotatable with table Motor 7.5 KW, 400 Volt, 50 Hz HM saw blade diameter 600 mm, F=30, Z=60, S=5 Cutting cycle duration approx. 4 sec. Automatic rotation of the aggregate -70° to +70° Saw aggregate rotation -80° to +80° on request Rotation of the aggregate from 0° to 70° in approx. 1.3 sec. Positioning accuracy +/- 0.2° Hold-down system consisting of 2 pneumatic Pressure cylinders with mounted pressure rail Side pressure plate system with electronic control Technical data slider system: Feed via gear/rack system with "brushless" motor Positioning accuracy +/- 0.4 mm Power of the feed motor suitable for pushing a package weight of 80 kg Gkodpfxov Aub Nj Afisd Max. feed speed 90 m/min. Pneum. slider lift after completion of the cutting cycle and return above sliding level Control: 12 inch "touch screen" BECKHOFF professional PC with WINDOWS operating system USB port Ethernet port Loading and saving machine data via USB Editing cutting program directly on the input unit Transferring cutting lists via USB or Ethernet Direct import of .btl (10.4) format files Working software: Up to 1000 cutting lists with up to 11 different cutting dimensions or 1 list with 10000 different cutting dimensions. Cutting dimensions in sequence Cutting cycle with 4 optimization options (Max. length, min. waste, sequence, length priority) Graphic display of the workpiece Additional options installed: ZA110 discharge table (per meter) ZA040 saw unit table rotation 80°

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine will be cleaned and completely checked before delivery. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height Detailed Description: ----- Technical Specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel radius: 125-145 mm Tool travel radius for rebate cutter: 130-160 mm Axis adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for wheel adjustment 2nd spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting radius for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max. throat depth: 35 mm Axis adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. throat depth: 35 mm Axial adjustment range: 55 mm Radial CNC-controlled spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max. throat depth: 35 mm Axial adjustment range: 40 mm Radial CNC-controlled spindle Split pressure shoe in front of the upper tool holder, adjustable to the tool cutting circle and pivoting away from the tool, spring-loaded. Pressure shoe before and discharge after the upper spindle with electronic digital displays, integrated into the memory function. 5th spindle - lower ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius: 93 - 200 mm Max. groove depth: 15 mm Axis adjustment range: 35 mm Feed system ----- Electronic feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min Feed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth gauge and self-cleaning. Adjustment range of the feed rollers relative to the left tool holder, axial: 35 mm Machine electrical system Gedpfx Aewzmu Rjfijkd ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. All spindles are IE 2 version. Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations are not taken into account. Machine stands, tables, and stops -----...

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Gsdpfovv H T Rsx Afijkd Operating instructions CE marking Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."