CNC machining center

Masterwood MVD 900

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Fsdsyrhcpepfx Acwega Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system Fedpfjidi Ivex Acwsga - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Fgjdpfx Asymx S Docwsa Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Fgjdpfexranpjx Acwea Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used BIESSE Selco WN2 saw - OSI control - label printer - Year 2017 - available April - saw height 60 mm - 1–80 m/min - quick-change saw blade - 4 air cushion tables Fgjdsyrr U Nopfx Acwea

Condition: used, Year of construction: 2020, total height: 2,100 mm, total length: 2,000 mm, total width: 2,500 mm, Price: On request - Machine available from: 2025-12-15 - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 975 - Working range Y [mm]: 1321 - Working range Z [mm]: 243 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 Fsdpfxsx Ad R Nj Acwsga - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling unit: Yes - Software: Biesse works - Saw unit present: Yes - Safety feature: - Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 Fgjdjvxfkgepfx Acwsa - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Fgedpfoxy Tmnsx Acwoa

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc.. Fsdpjfnldqsfx Acwoga

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves Fgedpfx Acov I Akvowja - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035