Used Vdf Center Lathe for sale (17,966)

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, turning diameter: 840 mm, feed length Z-axis: 6,000 mm, bed width: 560 mm, Turning diameter in gap: 1,040 mm, VDF Heidenreich & Harbeck Gildemeister M820x6000 Machine prfessionally refurbished, inspected and tested, very good working condition. BASIC TECHNICAL PARAMETERS: Swing over bed: Ø 840 mm Swing over cross slide: Ø 520 Swing in the gap: Ø 1040 mm Length of gap: 390 mm Distance between centres: 6000 mm Width of bed: 560 mm EQUIPMENT INCLUDED INTO THE PRICE: Digital readout Sony for X and Z axis Central lubrication system for logitudinal support Safety guard on chuck, tool post and rear cover on support Ligtening, cooling pump and emergency stop button ADDITIONAL EQUIPMENT: Steady rest range 20-300 mm 4-jaw turning chuck Ø 800 mm Machine located in central Poland, ready for checking. Knedpfx Abeuq A Iceloc Perfect condition.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 power capacity - main spindel 53 kW spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 11 t dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Knsdpfx Ajz Hmwkeblec Must move in short time

Condition: used, Year of construction: 1973, functionality: fully functional, turning diameter over bed 630-640 mm turning diameter over slide rest ca 380 mm turning length ca 2000-4000 mm total power requirement 15 kW weight of the machine ca. 7-8 t Knedpfx Abjztfwroloc

Condition: repair required (used), Year of construction: 1997, functionality: limited functionality, machine/vehicle number: 3601, center height: 170 mm, center width: 700 mm, overall weight: 755 kg, The machine is functional, but has a minor transmission defect, which is noticeable through unusual noises. Therefore, the machine is being offered for sale as requiring repair! Kodpfx Abe Aazk Seljnc

Condition: used, turning diameter over bed 1000 mm turning length 3300 mm centre height / mm VDF Boehringer – Conventional Lathe A robust, high-performance conventional lathe from VDF Boehringer is available for sale. The machine features a distance between centers of approx. 3,300 mm and a turning diameter of approx. 1,000 mm, making it ideally suited for machining long and large-scale workpieces. Technical Specifications Manufacturer: VDF Boehringer Machine Type: Conventional lathe Distance between centers: approx. 3,300 mm Turning diameter: approx. 1,000 mm Design: Conventional Steady rest: Not included Robust and durable construction Suitable for machining large and long workpieces Ideal for single-part production, repair work, and general machining tasks The VDF Boehringer is a classic, robust industrial machine, particularly well-suited for companies seeking a high-performance lathe for larger workpieces and demanding machining tasks. Sold as-is (as inspected). Viewing available by appointment. Kjdpfx Ajzu Dahebljnc Technical specifications subject to change and provided without guarantee.

Condition: used, turning diameter over bed 600 mm turning length 2800 mm centre height / mm VDF-Heidenreich & Harbeck E3 H – Conventional Lathe Offered for sale is a robust, high-performance VDF-Heidenreich & Harbeck E3 H conventional lathe. The machine features a distance between centers of approx. 2,800 mm and a turning diameter of approx. 600 mm. Its generous distance between centers makes it particularly suitable for machining long and large-volume workpieces. Technical Specifications Manufacturer: VDF-Heidenreich & Harbeck Model: E3 H Machine Type: Conventional lathe Distance between centers: approx. 2,800 mm Kodpfszu A T Hex Ablsnc Turning diameter: approx. 600 mm Includes: 2 steady rests Robust and durable construction Suitable for single-part production, repair work, and general machining operations This machine is ideal for workshops seeking a classic, robust, and versatile lathe for machining large and long workpieces. Sold as-is (as inspected). Viewing available by appointment. Technical specifications subject to change and provided without guarantee.

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Knodpfxsz Smtle Ablec

Condition: good (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 3,000 mm, total length: 4,000 mm, overall weight: 8,000 kg, The machine is coming from maintenance and is accompanied by a large amount of accessories. Kjdpsz Iif Hefx Ablsnc

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm Kedpfxey Tyyqe Ablsnc spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: used, Year of construction: 1970, turning diameter over bed 840 mm turning diameter over slide rest 640 mm turning length 3300 mm spindle bore 74 mm turning speeds 7,1-1400 U/min 3-jaw chuck 315 mm turning dia. in gap 920 mm length of gap 370 mm total power requirement 22 kW Kedpsyqvwrjfx Abljnc weight of the machine ca. 10 t dimensions of the machine ca. 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 660 mm, turning diameter over bed slide: 900 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, overall weight: 7,000 kg, Poreba TPK 90A1/2M Chuck 800 mm 2000mm between Centres Swing over bed 900 mm Swing over saddle 660 mm Spindle Speed 710 rpm Knjdpfx Aowbd Dvobloc Weight 7000 kg approx.

Condition: used, Year of construction: 1967, turning diameter over bed 0560 mm turning diameter over slide rest 300 mm turning length 1500 mm spindle bore 65 mm Knjdpfx Absw H Di Aslec spindle turning speed range 12- 1150 U/min total power requirement 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With multifix holder, chuck and turning center.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, We are selling this lathe, already dismantled and stored in the warehouse. Fully functional; a video of the machine can be sent via WhatsApp. Swing over bed: 1080 mm Swing over support: 720 mm Distance between centers: 9000 mm Minimum turning diameter: 20 mm Spindle speed: 1.8 – 355 rpm Main drive power: 40 kW Workpiece weight: 10 t Knedpfx Abjy I Ifwjloc

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is probably the best German-made lathe in its class ever built. BOHEHRINGER precision lathe, model DUE 630 Year of manufacture: 1991 Serial number: 1032.1239-08 Center height: 320 mm Swing diameter over bed: 640 mm Distance between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 82 mm Spindle head: DIN 55022, size 8 Drive power: 24 kW Max. torque: 2,000 Nm 24 speeds: 9 – 1,800 rpm 60 cross feed rates: 0.03 – 28 mm/rev 60 longitudinal feed rates: 0.06 – 56 mm/rev Footprint: L x W approx. 4,000 x 1,525 mm Weight: approx. 4,500 kg Accessories: - 3-axis digital display HEIDENHAIN - Parat tool holder including 4 holders - Coolant system - Chip guard back panel - 3-jaw chuck T 315 mm including jaws - Roller strip cover for lead screw support to the bed - Machine light - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine has been completely technically inspected and can be inspected under power if desired. The gearbox runs very well. Knodpfx Abezlm Uceljc The bed guides are also in good condition.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Knsdpfx Abexp Hudolec

Year of construction: 1960, condition: ready for operation (used), Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible. Ksdpfx Abjylbtbolonc

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 335 mm, center height: 165 mm, turning length: 1,016 mm, spindle speed (max.): 2,500 rpm, overall weight: 900 kg, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe with accessories in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Colchester • Model: Master-2500 • Distance between centers/turning length: approx. 1,016 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 2,500 rpm • Spindle nose: 4 in. D.1. Camlock • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm (Pratt Burnerd) • Weight: approx. 900 kg • Tailstock quill: MK3 • Motor power: approx. 5 hp • With accessories: Set of jaws for the chuck, quick-change tool holder, centers, etc. • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire with your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Kodoz Dbkyopfx Abljnc Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: used, Year of construction: 1983, Boehringer DUE 500 Guide and Lead Screw Lathe Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: 1983 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled and underwent a comprehensive functional test. The machine geometry was inspected and adjusted. A test protocol according to DIN 8605 is available. As part of the work, the wedge strips were also adjusted, and the coolant pump was overhauled. Technical data: Center height: 250 mm Distance between centers: 1300 mm Spindle bore: 62 mm Chuck diameter: 300 mm Spindle speed: 2240 min-1 Motor power: 11 kW Knsdoz A Tt Djpfx Ablsc Approximate footprint: 4000 x 1525 mm Approximate weight: 4300 kg Equipment: 3-axis digital display, NEW Coolant system Chuck guard with microswitch Emergency stop Roller cover Machine light Geometric protocol Inquiry item: Transportation costs will be provided in a separate quote.

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Knodpfxjfmd Dho Ablsc Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1984, Maximum turning height 180 mm Distance between centers 1000 mm Swinging diameter over bed 350 mm Swinging diameter over cross slide 200 mm Bed width 255 mm Spindle bore 36.5 mm Spindle mounting, DIN 55027 Size 5 Speed range, 14 steps 28 – 2500 rpm Feeds, 9 longitudinal 0.04 – 0.4 mm/rev ditto, 9 facing 0.02 – 0.2 mm/rev 38 metric threads 0.2 – 18 mm 35 Whitworth threads 76 – 2“ 31 module threads 0.4 – 13.5 module 25 diametral pitch threads 36 – 2.6 pitch Tailstock mounting MK 4 Drive power 3 kW Machine dimensions L x W x H 2380 x 850 x 1800 mm Weight 1300 kg Accessories / Special features: • 2-axis digital display EASSON ES-8A • Quick-change tool holder system “Multifix” Size B • Chuck guard, foldable, electrically secured • Coolant system Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Knsdsyud Itjpfx Ablec DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm bore diameter 130 mm weight of the machine ca. 5,25 t required space / m Knjdpfx Aovdx I Aobloc

Condition: ready for operation (used), turning diameter over cross slide: 490 mm, spindle bore: 105 mm, turning diameter: 900 mm, turning diameter over bed slide: 490 mm, turning length: 3,000 mm, total length: 4,750 mm, total width: 1,925 mm, total height: 1,750 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 1 rpm, overall weight: 4,250 kg, Stanko (Mostana) Heavy Duty Lathe Model: 16K40 – 3000 Swing Over Bed: 900mm Swing Over Top Slide: 490mm Distance Between Centres: 3000mm Spindle Speeds: 1-1250 RPM Kedpfsz S Nkfex Ablenc Spindle Bore: 105mm Machine With: 3 Jaw Chuck Fixed Roller Steady Rapid Traverse Dimensions: 4750 x 1925 x 1750mm High Weight: 4250 KGS

Condition: used, Year of construction: 1979, spindle bore: 41 mm, 2-axis milling machine capacity: 750 x 500 mm bore: 40.5 mm Kodpfxez Tmzwe Ablenc

Condition: excellent (used), turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 355 mm, turning diameter over bed slide: 210 mm, turning length: 635 mm, total length: 1,605 mm, total width: 890 mm, total height: 1,195 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 22 rpm, type of input current: three-phase, overall weight: 790 kg, Colchester Student 1800 Gap Bed Lathe Kedpfxez S Nibo Abljnc Model: 1800 Distance Between Centres: 635mm Swing Over Bed: 355mm Swing Over Cross Slide: 210mm Swing In Gap: 480 x 115mm Spindle Speeds: 22-1800 RPM Spindle Bore: 40mm Machine With: 3 Jaw Chuck Quick Change Toolpost and Holders Coolant Pump & Fittings Lo-Voltage Light Dimensions: 1605 x 890 x 1195mm High Weight: 790Kgs

Condition: used, Technical details: turning diameter over bed: 230 mm Knodpfx Abjzvnq Tslsc turning diameter over support: 135 mm centre distance: 2000 mm spindle bore: 60 mm tailstock quill taper MT: MK 5 tailstock quill adjustment:: 300 mm total power requirement: 5,5 kW weight of the machine ca.: 2,5 t dimension machine approx.LxWxH: 3,7 x 1,20 x 1,30 m • 4 change gears installed • No taper turning attachment • 3-jaw chuck: Ø 350 mm • 4-jaw chuck: Ø 315 mm • Coolant system available *