Used Mac Pbm60 for sale (23,206)

Condition: new, shaft diameter: 60 mm, – Shaft diameter 60 mm – The lower two rollers are hydraulically adjusted – Usable in horizontal/vertical position – Three driven rolls – NC control (7-inch touchscreen) – 2 speeds – Brake motor Hsdpfx Aajyh R Hasgsfg – Overload protection system – Roller diameter Ø177 mm – Emergency stop – Documentation – 400V

Condition: new, Spindle speed 9000rpm, Spindle motor 4kw, Cutter cycle motor 0.75kw, Maximum tenon width 100+2RMmm Maximum tenon thickness 30mm Maximum tenon depth (shoulder) 50mm Table tilt upwards 0-15 degrees Table tilt downward 0-30 degrees Hjdpsn Nwdlefx Aagsfg Table tilt side 0-20 degrees Table fence adjustable 90 to 45 degrees Pneumatic adjustable work place clamps x 2 PLC operation TCT disposable tip cutter block Overall dimensions 1300 x 1200 x 1600mm Weight 950kg

Condition: good (used), functionality: fully functional, automatic unloading from stand total length 4,5m arm length 100cm Hodjy N N R Ropfx Aagsfg two columns total power 5kW

Condition: used, Year of construction: 2008, functionality: fully functional, Well-maintained used machine from a screw factory - Horizontal end machining center for simultaneous double-sided end machining of shaft-shaped parts For further information, please inquire. Hsdpfxjwt Upmo Aagsfg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, TECHNICAL DETAILS Minimum dimensions for double-sided machining: Diameter 12 mm, Length 200 mm Maximum dimensions for double-sided machining: Diameter 50 mm, Length 800 mm Minimum dimensions for single-sided machining: Diameter 12 mm, Length 75 mm Maximum dimensions for single-sided machining: Diameter 70 mm, Length 500 mm Cutter diameter: max. 140 mm Tool holder: SK40 Workpiece clamping: Hydraulic centering vice MACHINE DETAILS Performance Data Power: 24 kW Voltage: 400 V Hfodoxxkd Iopfx Aagog Frequency: 50 Hz Max. pressure: max. 120 bar EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Condition: used, Year of construction: 2003, Plastic Recycling Mill Manufacturer: REG-MAC Italy Type: R100/75/V Hfsdowav Hmopfx Aageg Engine Power: 75 kW Weight: 1850 kg Year of Manufacture: 2003 Technical Condition: Used

Condition: good (used), Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor Hfodpfxerqipno Aagjg -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Hfsdpfx Aoi D Ihujageg

Condition: new, Fanuc A02B-0259-C241 # A HANDY MAC OPE PANE SN:P002780 ,unused, 100% functional, scope of delivery according to photos Hjdji D Uvmspfx Aagofg

Condition: ready for operation (used), Indramat MAC 090A-0-ZD-4C/110-B-1/WI522LV Permanent Magnet Motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Price please ask separately! Hedpfoi D Ihqsx Aagjfg

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet - three-phase servo motor, SN:68352, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,For this item, the agreed sales discounts do not apply. Price please enquire separately!,ATTENTION: Costs for packing and shipping please enquire separately! ATTENTION: Please enquire for charges for packing and transport separately! Hsdpji D Ii Iofx Aagjfg

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-B-0/S001 permanent magnet three-phase servo motor, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos Hfsdpfx Aaoi D Ih Aegjg

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 SN: 68351 Permanent magnet three-phase servo motor, hole spacing of the mounting holes: 152x152 mm, drive shaft diameter: 32 mm, used, normal signs of use, 100% functional, shipping costs please inquire separately! Please ask for transport charges! Hodpfx Aji D Ii Djagjfg

Condition: new, Indramat MAC112B-0-GD-3-F/130-A-0/S0054 Permanent Magnet Motor , S.No. MAC112-80864, unused in opened original box, 100% working ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Hsdpfx Asi D Ip Rsagsfg

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 permanent magnet three-phase servo motor, SN:35588 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Price please ask separately! Hfedpfx Aaoi D Ig Esgsg

Condition: ready for operation (used), Indramat MAC 112D-0-FG-3-F/180-A-0/S011 Servo motor SN:71378 ,used, strong traces of use, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hfjdpfxoi D Ikas Aagjg

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 1,670 mm, travel distance Y-axis: 505 mm, travel distance Z-axis: 190 mm, total height: 2,950 mm, total width: 2,960 mm, overall weight: 13,700 kg, product length (max.): 5,110 mm, number of axes: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, Helical Interpolation • Distance between centers: 1500 mm • Max swing diameter over covers: 550 mm • Max turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" Big Bore • Sub-spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: Hfodpfey Ddiwex Aageg • Tool magazine: 44 positions • Lower turret: 12 positions with motorized tools • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 divisions • Coolant/pump pressure: 15 bar • Working hours (as provided): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Hodpfx Aasyt Nvtsgjfg Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80-position tool magazine, main spindle with C axis, sub spindle with C axis, Y-axis upper slide/milling spindle, HSK 63 tool holder, infinitely variable B axis as milling spindle, center distance 1500 mm, spindle bore 80 mm, max. swing diameter 550 mm, turning diameter 350 mm, lower turret with 12 stations and driven tools, Interlite compact filter system 900 l, extraction system, spindle operating hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Hjdey Atu Tjpfx Aagsfg

Condition: used, machine/vehicle number: 008012, Overall length: 6600 mm Hsdpfx Aey Nkqleagsfg Overall width: 2150 mm Loading compartment length: 2900 mm Loading compartment width: 1400 mm Cutting shaft power: 37 KW

Condition: good (used), machine/vehicle number: 75804, Welding current range AC Tig: 7 - 390 A Hfsdpfsb Nv Irsx Aagog Welding current range direct current Tig: 6 - 230 A Electr. connection: 380 V, 45 A space requirement: 1100 x 600 x 1370 mm

Condition: used, power capacity 38 Nm volt 0 V Hedpfsytg Tiox Aagefg ampere 42 A weight of the machine ca. 59 Kg

Condition: used, power capacity / kW volt / V ampere / A Hfjdsyn R Tiopfx Aagog

Condition: new, Year of construction: 2025, Mac 16 premium low loader    • High-speed axles (10 tons each)    • Air brakes (WABCO EBS + ACR)    • Twin air tyres 235/75/17.5    • Hydraulic ramps    • Flat floor 4900 x 2550 mm    • Sloped floor 1500 x 2550 mm    • 50 mm towing eye, height 520 mm    • Hydraulic support leg    • LED lighting    • Storage box    • COC documents    • License plate registration Hfjdpfxjytdbqj Aagog Condition: New Year of manufacture: 2025

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Hfedjpu R Nvopfx Aagjg Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition