Round End Tenoner

D-MAC Tenon Flex CNC

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio Hnodpelht H Eefx Ah How excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Year of construction: 2024, condition: new, - With 5 spindels - Grooved table for short pieces Outstanding characteristics: Sealed safety hood to reduce noise levels and prevent chips from splash Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min Each spindle driven by independence motor with powerful cutting Hjdpjgp Dcqefx Ah Hsnw To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly Centralized spindle adjustment on the front panel is easy to work Hard Chromed electro plated treatment has been adopted for the durability of the work table surface Short feeding device is equiped for smooth feed avaliably Bottom driving roller to improve feeding performance Pneumatic pressure feed wheel can be seperately adjusted, make for feed pieces with various thickness Manual oil pump to lubricate the working tables and slides, to be easy to centralized control Pre- trimming cutter on the first bottom shaft and teethed work table was designed to reduce the noise level effectively and cut out the precise linearity Removable work table of vertical spindle was designed of dust proof of efectively protect the screw bar from pollution Special hardness treatment of HRC 58 has been adopted on the work table beside of the first bottom spindle for increasing the durability and natural life of the work table surface Adopting electric component from international class with steady quality TECHNICAL SPECIFICATIONS: - Working width (min): 20 mm - Working width (max): 240 mm - Working thickness (min): 8 mm - Working thickness (max): 180 mm - Number of spindels: 5 kos - spindle speed: 6000 r/min - Diameter of Spindle: 40 mm INSTALLED CUTTER-BLOCKS (from first to last): - first bottom spindle: diameter 108- 145 mm - right spindle: diameter 108- 200 mm - left spindle: diameter 108 -200 mm - first top spindle: diameter 108- 200 mm - second bottom spindle: diameter 108- 200 mm MOTOR POWER: - first bottom spindle 5,5 KW (7,5 HP) - right spindle 5,5 KW (7,5 HP) - left spindle 7,5 KW (10 HP) - first top spindle 7,5 KW (10 HP) - second bottom spindle 7,5 KW (10 HP)

Condition: good (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: T4907, Cutting band saw Stenner VHM 36, 3" Year of manufacture 1976 S/N T4907 roller diameter 915mm max working width to fence ( right ) 230mm Hnedpjuy U Eyefx Ah Hjw max fence width to left pressure roller : 230mm table height 812mm feed 10-45m/min fence tiltable 0-45 degrees max height 406mm Saw blades up to 78mm Motor 15kw ( 18 HP ) three-phase motor Weight approx. 1.85 tons Technical data subject to change

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min Hsdpfx Ahsqy E Rle Hjnw central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Hsdpfxoi Hpk Uj Ah Hsnw Weight: 500kg

Condition: good (used), Rotor approx. 250 mm Hydraulic slider Hodpfswc R Rljx Ah Honw Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW External dimensions approx. 1750 x 1250 x 1600 mm Technical specifications upon request

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting Hnodpfed Exwgsx Ah Hew KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately - Hnodpscqvhwsfx Ah Hjw

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: Hedpfx Aou Uh T Dsh Henw - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 Hnodpfx Aheiix Uvs How profiling and milling machine UNIVAR 10, year 1997