Airstream Classifier

British Rema Aerosplit Classifier Model MAC 2 / 450 Aerosplit

Year of construction: 1996, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Csdjkqlf Sspfx Adhsrh We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: stainless steel for product contacted parts Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Cedoxvrt Sspfx Adherh

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. Csdpfx Adeua Tbwjhjrh SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 Cedpjx T Ar Nofx Adherh The plant consists of the following units: 1. Mill 2. Raw material filling unit 3. Air filter 4. Electrical switchgear

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Cjdjnxk Ixjpfx Adhorh

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter Csdjx Ac Rbjpfx Adherh ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Credjx R Avvspfx Adheh Handling trolley  

Year of construction: 1965, condition: used, Manufacturer: Alpine Model: 400 Z Year: 1965 Type: Pin mill Crsdpfxjzmi Hks Adhsh Rotor diameter: 400 mm Engine power: 22 kW ATEX classification: Ex II2G Ex daIIC T4 Maximum permissible speeds of drive shafts: 2,500 – 7,500 rpm Materials : House : Cast iron Rotor / Stator: Stainless steel Door with minor warping taken into account during refurbishment (suitable seal fitted, tightness ensured)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Blower for transporting goods from the dryer to the rebler, through the air separator and then onward to packaging. Blower with 7.5 + 11 kW with frequency inverter, additional blower with 7.5 kW optionally available. 3 rotary airlocks at 0.55 kW each. Steel frame for the rebler unit, disassembled for truck transport. Control cabinet for rebler and air separator system with 32 A input current. System has been dismantled. No in-house herb drying anymore. Crodpfswqfxysx Adheh - youtube short: Herb separation, cleaning, air separator for mint, sage, lemon balm.

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Industrial Fine Grinding & Micronization System Complete Industrial Production Line – Excellent Condition Complete industrial grinding and micronization system based on the DESI-14 high-speed disintegrator, designed for intensive particle-size reduction and production of fine powders. Manufactured in 2019 by Desintegraator Tootmise OÜ, Estonia, this particular grinding and activating unit was manufactured for the grinding and activation of natural zeolite. The system combines the DESI-14 disintegrator with controlled material feeding, two-stage cyclone separation, automatic air filtration, product conveying and big-bag discharge, providing a complete industrial grinding line. Final particle-size distribution and processing capacity depend on the characteristics of the processed material, feed rate, required fineness and operating parameters. According to the manufacturer's operating instructions, throughput can be adjusted and increased where the required product fineness and motor load permit. Proven Factory Performance During the manufacturer's factory test using calcium carbonate (CaCO₃), the system achieved: Throughput: 1,000 kg/h Final product: 92% of particles below 30 μm Feed particle size: below 100 μm Feed moisture: 2% This provides documented factory performance under the stated test conditions. Actual throughput and final particle-size distribution depend on the processed material, required fineness and operating parameters. Technical Specifications Manufacturer: Desintegraator Tootmise OÜ, Estonia Model: DESI-14 Year of manufacture: 2019 Technology: High-speed impact disintegrator Rotor configuration: 6-row rotor set Rotor sets included: 2 complete sets, each consisting of 2 rotors Rotor speed: approx. 2,965 rpm Main drives: 2 × 30 kW electric motors Maximum total installed power: 80 kW Power supply: 3N, 50 Hz, 380 V Codpezy Nbhofx Adhorh Wear protection: Working surfaces of the rotor impact elements protected with HARD 60 wear-resistant alloy Cooling: Water-cooled housing and cover Maximum airflow through grinding unit: 1,000 m³/h Maximum feed moisture: 2% Maximum feed temperature: 50°C Electrical protection: IP54 / IP55 DESI-14 Disintegrator Dimensions: 1,570 × 1,160 × 1,300 mm Net weight: 850 kg Complete Grinding Line Installation dimensions: approx. 6,000 × 5,200 × 4,000 mm Gross weight: approx. 2,700 kg Feed hopper volume: 1.5 m³ Complete System Includes DESI-14 disintegrator on frame, 2 complete rotor sets,1.5 m³ feed hopper, WAM screw feeder, First-stage cyclone, Second-stage cyclone with hopper, 3 rotary valves, WAM screw conveyors, WAMFLO automatic air filtration system Exhaust fan, Diverter flap valve for big-bag filling, Control board, Supporting steel structures, Connecting channels and components The grinding system is designed as an integrated production line: material is fed into the DESI-14, ground material is transported through the air stream into the cyclone separation system, and the remaining fine material is captured by the automatic air filter. The finished product is then conveyed towards the big-bag discharge system. Machine Condition & Availability Condition: Excellent and fully operational Location: Zagreb, Croatia Availability: Immediately available