Used Kuka Zh30/60 Iii Neu for sale (24,973)

Year of construction: 2021, condition: new, PRICE ON REQUEST! - NEW - unused - completely measured - Gear backlash: Axis 4 - 0.005 WM Axis 5 - 0.005 WM Nodpfog A Ivdex Aqwslf Axis 6 - 0.005 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand as an exchange unit (without exchange on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional charge MORE than 100 central hands in stock immediately, various models. Just ask! Express overhaul of your KUKA central hand is also possible - from delivery, 48-72 hours. In addition, we also offer the repair of ABB wrist units.

Condition: refurbished (used), functionality: fully functional, load capacity: 60 kg, controller manufacturer: Kuka, controller model: KRC2 / 4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! Nsdpfxjrqgdue Aqwolf If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), functionality: fully functional, inspected and tested Nlodozvfarepfx Aqwef

Condition: refurbished (used), PRICE ON REQUEST! > used & tested completely overhauled, all wear parts replaced - completely measured - gear play Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - central hand newly adjusted - endurance test for 8 hours at 100% load - delivery in a special box (insured shipping) - central hand in exchange (without exchange on request) - gearbox overhaul of axes 1-6 Njdpfjg A Itqox Aqwolf - 12 months warranty - 18 months possible for an additional charge MORE than 100 central hands in stock immediately, various models. Just ask! An express overhaul of your KUKA central hand is also possible – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrist units.

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Njdpfx Ajxzynusqwolf

Condition: used, Year of construction: 2013, number of controlled axis 6 STK workpiece weight 60 kg throat 820 mm weight of the machine ca. 0,665 t dimensions of the machine ca. 30 m³ The KR 60-3 industrial robot is a front-runner in its class thanks to its high Nljdjzupmgjpfx Aqwof flexibility and long reach with optimum load capacity. KUKA robot type: KR 60-3 Installation position: Floor Number of axes: 6 Maximum load of the robot: 60 kg Maximum reach: 2230 mm Repeatability: ± 0.06 mm Control system: KR C4 Weight approx. 665 kg Robot movement speed Axis 1: 128 °/s Axis 2: 102 °/s Axis 3: 128 °/s Axis 4: 260 °/s Axis 5: 245 °/s Axis 6: 322 °/s Axis range (in º) Axis 1: ±185 ° Axis 2: -135 ° / 35 ° Axis 3: -120 ° / 158 ° Axis 4: ±350 ° Axis 5: ±119 ° Axis 6: ±350 °

Condition: refurbished (used), load capacity: 6 kg, inspected and tested Nsdpozvffnjfx Aqwjlf

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,767 h, overall weight: 665 kg, load capacity: 60 kg, arm reach: 2,033 mm, controller manufacturer: KUKA, number of axes: 6, This 6-axis KUKA KR 60-3 was manufactured in 2008. It features a payload capacity of 60 kg and a reach of 2033 mm, making it suitable for various applications. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 60-3 robot arm we have for sale. Contact us for further details. Nledpszb Hk Dofx Aqwof • (V)KR C2 ed05 controller

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We are offering for sale our Kuka laser welding robot KR60-3 with KRC4 ROBOTstar controller. The system is in very good condition and is being sold only due to a product change by a customer. Laser welding robot KR60-3 with KRC4 ROBOTstar controller. Scanner – processing optics in combination with a camera system for welding copper connections. Component feed via Bosch Rexroth transfer system TS 2 plus. Nljdovtnd Sjpfx Aqwjf Laser system from IPG with 5 kW power and a fiber output. Media supply. Rotary-tilting module DKP 400. Laser protection cabin, active according to EN 60825. Control panel / HMI for operating the system. KUKA system control and PLC cabinet. Extraction and filter system. The system will be sold from its current location (Zollner Electronic, Str. Parc Industrial Sud 10, Satu Mare 440247, Romania). We will gladly answer any questions you may have about the system and provide you with all relevant documentation. The new price of the system in 2019 was approximately €980,000. Inspection and demonstration are possible at any time by appointment. Special feature of the system: also suitable for deep copper welding!!!! Expected availability: Immediately. We would like to emphasize “explicitly” the very good technical and visual condition of the entire system!!! The camera head alone costs more than €85,000!!!

Condition: new, Year of construction: 2024, load capacity: 30 kg, arm reach: 2,100 mm, ROBOTIC ARM BRAND: KUKA MODEL: KR 30 R2100 / SEL TECHNICAL DESCRIPTION PAYLOAD: 30 KG MAX. REACH: 2100 MM YEAR OF MANUFACTURE: 2024 Nedpfxjzuly Ne Aqwolf CONTROL UNIT: KRC5 SOFTWARE: KSS 8.7 OPTIONS: KRC 5 dualcab BA C5 dualcab AC SPB USB KSI

Condition: used, Year of construction: 2012, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,628 mm, controller manufacturer: KUKA, Industrial robot from KUKA. Last used in an automation application. The robot can be tested on site. Transport must be arranged by the buyer. Nledpfxeyg Dlpo Aqwjf

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,307 h, load capacity: 3,000 kg, lifting height: 4,890 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Technical condition: Good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery year of manufacture: 2019 Nlsdoxaqyfopfx Aqwof Battery condition: 80 - 100% Description: Price includes new UVV inspection (we use original Still parts), new paint (original Still), new white tires, charger with matching plug, battery manufactured in 2019, overhauled and tested with Kappa test (87%), charger with matching plug, front and roof windshield will be retrofitted. We will gladly arrange cost-effective transport for you. Rental / lease-purchase possible!!! Side shifter, 3rd valve, rear work light, front work light, roof protection, windshield, full free lift, CE certificate.

Condition: used, mileage: 37,890 km, power: 110 kW (149.56 HP), first registration: 08/2023, fuel type: diesel, empty load weight: 2,530 kg, maximum load weight: 970 kg, overall weight: 3,500 kg, wheelbase: 3,000 mm, next inspection (TÜV): 08/2028, CO₂ emissions: 182 g/km, fuel consumption (urban): 8.2 l/100km, fuel consumption (extra-urban): 7.1 l/100km, fuel consumption (combined): 7.8 l/100km, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: air conditioning, airbag, central locking, trailer coupling, Fixed trailer hitch, UConnect hands-free system (with Bluetooth interface), air conditioning, "Rear View" rearview camera, front seat heating, keyless access, DAB - digital radio reception, electrically adjustable and heated exterior mirrors, double passenger seat on the right, with storage compartment, "RSD 4000" radio (2-DIN) with 5.8" TFT color display, front speakers, Bluetooth interface, driver/passenger airbag, front and rear parking assist, hinges for rear swing doors with enlarged opening angle (max. 270°), hinges for rear doors with enlarged opening angle, new MOT/emission test, service booklet maintained, MB SPRINTER 215 CDI (315) with increased gross vehicle weight to 3,500 kg and a completely new REFRIGERATION SYSTEM from 2026! Suitable for fresh produce transport down to 0° Celsius, L2H2: medium length, high roof, medium wheelbase: 3,665 mm ... Robust insulated interior (HACCP), cargo securing: lashing rails on both sides ... Integrated refrigeration unit - without roof-mounted unit: M-TEC FRIGO DOMETIC 4500, suitable for fresh produce transport down to 0° Celsius ... Internal dimensions of the refrigerated cargo area: Length: 3,150 mm, Width: 1,700 mm, Width between wheel arches: 1,220 mm, Height: 1,510 mm, Height under integrated evaporator: 1,340 mm, Width of rear door opening: 1,380 mm, Width of sliding door opening: 1,220 mm, Volume: 8,421 cubic meters, Payload: 1,080 kg ... Capacity for approx. 85 E2 boxes. Additional options available at an extra cost (net): Standby cooling, 230-volt mains operation, separation/spreading/locking bars: 180 EUR, rubber mat for cargo area floor: 185 EUR, thermal curtains for sliding and rear doors. German vehicle registration, vehicle handover: approximately 10 days after written order. Information and contact directly: and Nedpfx Aqozmkptjwjlf

Condition: new, functionality: fully functional, power: 2.8 kW (3.81 HP), fuel type: gasoline, color: yellow, operation weight: 58 kg, Year of construction: 2026, Equipment: UVV, Bomag BT 60 Tamper – NEW Bomag BT 60 Tamper – NEW | 15 kN impact force | 23 cm footplate | Honda GXR 120 gasoline engine | Operating hour and RPM counter Item number: 54100071 Technical data: Manufacturer: Bomag Model: BT 60 Condition: NEW Operating weight: 58 kg Impact force: 15 kN Footplate width: 23 cm Engine: Honda GXR 120 gasoline engine Engine power: 2.8 kW Fuel: Gasoline Starting system: Reversible start Highlights & Features: - Compact tamper for precise compaction work - Robust design – ideal for daily use on construction sites - 23 cm footplate – optimal for narrow trenches & edge areas - Honda gasoline engine – reliable & easy to maintain - Integrated operating hour and RPM counter - Made by Bomag – proven quality & immediately available Application areas: ✓ Pipeline & sewer construction ✓ Fiber optic & cable laying ✓ Garden & landscaping ✓ Municipal applications & construction companies ✓ Compaction work in confined areas & trenches Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection & collection possible Delivery throughout Germany & internationally on request Pricing ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT Other models available! Also available with 16 cm, 20 cm & 28 cm footplates ➡️ New & used machines, accessories & spare parts Nsdpezrdbysfx Aqwjlf Buy Bomag tamper | BT 60 NEW | Gasoline tamper 15 kN | Compaction equipment with Honda engine | 23 cm footplate | Bomag compaction technology | Tamper for sewer construction & trench compaction Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available new goods! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 planetary gearbox, serial number: 7767, unused, in sealed original packaging, 100% functional, scope of delivery as per photos. Njdpfxjx Ducfo Aqwolf

Condition: new, Neugart 100455119 / PSFN140-020-SSSD3AG-Z32 / 60 / 130 / 165 / B5 / M10 planetary gearbox 2315656-1, unused in original packaging, 100% functional, scope of delivery as per photos Nledpfx Asx Et Rgeqwjf

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 planetary gearbox SN: 2186 incl. motor flange, unused in opened original packaging, 100% fully functional, delivery as per photos. Njdpjy Npg Sjfx Aqwslf

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 . 100455119 F-No. 2315656 Planetary gearbox Serial number: 7777, unused, in sealed original packaging, 100% operational, scope of delivery as per photos. Nlsdpfey Nrzljx Aqwjf

Condition: used, mileage: 1,033,881 km, power: 260 kW (353.50 HP), first registration: 06/2010, number of seats: 60, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, * Our internal no.: 1161 * O 530 GÜ * ZF automatic transmission (1/2/3/D/N/R) * Retarder * 60 seats (including 4 folding seats) * Seat belts fitted on seats * 260 kW / EURO 5 * LAWO matrix (front/side/rear) LCD matrix * LAWO control unit * Radio installed * Emergency exit hatch above driver's station * Folding windows * Mechanical folding ramp * Automatic door opener operated by passenger * New brakes on front and drive axle as of 03/2026 * The customer is obliged to independently inspect the condition and specifications of the goods/vehicle! * etc. * Vehicle may still be in operation / mileage and condition subject to change * All information subject to change without notice * We reserve the right of prior sale * Please refer to our General Terms and Conditions Nledeyrwm Depfx Aqwef

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden is at your service (by phone at ...). WEBER CR 3 Hatz Diesel Vibratory Plate Compactor / New unit / in stock & immediately available. Sales price: €4,690.00 net / €5,581.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series excel with strong compaction performance and highest efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced operating characteristics, high running smoothness, and low hand-arm vibrations ensure a high level of operating comfort. Advantages: - Infinitely variable forward and reverse travel. Hydraulic switching - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide bar - Protection for machine and engine by engine protection frame and cover - Reduced maintenance due to the self-tensioning centrifugal clutch - Simple servicing, as all maintenance elements are easily accessible - Safe and quick loading thanks to the large, foldable lifting eye Njdpfoymv Rwox Aqwslf - Areas of application: Earthworks, landscaping, vibration of interlocking paving stones, and compaction of sand, gravel, or crushed stone Technical Data: Engine: Hatz Diesel Maximum engine output: 3.5 (4.8) kW/HP Weight: 206 kg Centrifugal force: 35 kN Frequency: 80 Hz Working width: 50 cm On request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, we are one of Germany’s largest commercial vehicle dealers with 800 used vehicles in stock. We supply the complete Weber MT range for you! Errors and prior sale excepted. = Further Information = New: Yes Engine brand: Hatz Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden is at your disposal (by phone). WEBER CR 3-III Honda Vibratory Plate / New machine / In stock & immediately available. Sales price: €3,790.00 net / €4,510.10 gross 3-year warranty Shipping possible. The reversible soil compactors of the CR series stand out with high compaction performance and maximum efficiency. They are the first choice for compaction tasks ranging from classic road and civil engineering to paving work. Balanced running properties, low noise levels, and minimal hand-arm vibrations ensure a high level of operator comfort. CR 3 - The All-Rounder: - Infinitely variable forward and reverse travel, hydraulic direction change - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Protection for engine and machine through engine protection frame and engine cover - Reduced maintenance effort thanks to the self-tensioning centrifugal clutch - Easy servicing as all maintenance components are easily accessible - Safe and quick loading with large, foldable lifting eye - Areas of application: earthworks, landscaping, paving block compaction, and compaction of sand, gravel, or crushed stone Technical Data: Engine: Honda petrol Max. engine output: 6.0 (8.2) kW/HP Weight: 203 kg Centrifugal force: 35 kN Frequency: 80 Hz Working width: 50 cm Financing options available upon request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted. Nljdpfeymv R Dsx Aqwof = More Information = New: Yes Engine brand: Honda Please contact Marius Herden for more information.

Condition: ready for operation (used), KUKA 1FK7081-5AZ91-1ZZ9-Z S04 servo motor, serial number: YFV050660867001, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nljdpfszv Hmmox Aqwof

Condition: ready for operation (used), KUKA 1FK7081-5AZ91-1ZZ9-Z S04 servo motor, serial number: YFVN50666078006, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nodpezv Hndsfx Aqwelf

Condition: ready for operation (used), KUKA 1FK7081-5AZ91-1ZZ9-Z S04 servo motor, serial number: YFV050660867033, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlsdpfxozv Hmtj Aqwef

Condition: ready for operation (used), KUKA 1FK7081-5AZ91-1ZZ9-Z S04 servo motor, serial number: YFVN50666078013, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlsdpfszv Hnkox Aqwjf