Used Flott Ts 200 M. Absaugung Ma 600 for sale (83,780)

Condition: good (used), FLOTT TS 200 double bench grinder with MA600 extraction unit Iaodpfx Amjx U Dkvj Ier 400V Grinding wheel diameter: 200 mm

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Iodpfxjiiyr Se Am Iear Machine stand, emergency stop pushbutton and brake, and suction unit

Year of construction: 2020, condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug with base frame, integrated suction and brake Also other models available from stock! Inquire about the current stock. Iasdpoiiywzefx Am Isr

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 45320 014, overall weight: 70 kg, grinding wheel width: 30 mm, grinding wheel diameter: 160 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Grinding wheel diameter: 160 mm Grinding wheel width: 30 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connected load: 0.9 kW Rated current: 1.8 A Dimensions & Weight Iaodjyr H Uqjpfx Am Ior Dimensions (L x W x H): 500 x 400 x 1,200 mm Machine weight: 70 kg External reference: Lot 13

Condition: new, Year of construction: 2025, neu 2025 050141 prompt, Zwischenverkauf v Polen 2821.24 € 1 200 x 32 x 32 mm 1 kW 2800 1/min 42 mm 470 mm 250 mm 1050 mm 60 kg Quiet running, maintenance-free motor Iodpfsyrhqysx Am Ijar Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774)

Condition: new, Year of construction: 2026, Description Double-sided grinding machine TS 200 SD P with extraction system, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Extraction nozzle Ø (mm): 42 Iasdpfjr Eqzfsx Am Isr - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 - Speed (rpm): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Mosca RO-M Fusion 800×600 Banding Machine This machine is 100% operational and ready for production. Manufacturer: Mosca, Germany. Manufactured in 2019. Iaedpfx Ameywdtcj Ior This device is indispensable for shipping, for wrapping heavy parcels, such as leaflets or catalogs. A 5mm PP strap reinforces the packaging and creates a handle that makes it easy to grab and transport. Rotating control panel Adjustable tape feed length and tension 230V power supply Weight: 240kg

Condition: ready for operation (used), Bosch SD-B4.140.020-04.000 brushless servo motor permanently excited SN:946000756, used, normal signs of use, 100% functional, scope of delivery as per photos Iaodpfoi D E T Nox Am Ior

Year of construction: 1987, condition: used, grinding length max. 630 mm grinding width max. 200 mm workpiece height . mm x-axis max. 250 mm y-axis max. 710 mm distance spindle center to table max. 500 mm table surface area 0,25 mm table load max. 1,1 t table speed -stepless- 2 - 18 m/min cross feed autom. . dust exhaust 0,25 kW coolant pump 0,09 kW total power requirement ca. 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2400 x 1600 x 1900 mm Iaodpfx Ajgbgawom Isr Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 Isdpfsydi A Isx Am Isar -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg Iodsl Dw D Espfx Am Isar

Condition: good (used), Used column drilling machine Iaedpfx Ameyuvkgj Ijr good condition Continuous/normal drilling capacity 25/30 mm MK3 Drilling stroke 120 mm 2 speed ranges up to 1000/up to 2000 rpm

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Ijdpeymqzqsfx Am Ijar delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Isdpsymqzkofx Am Iear delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO , Rexroth 1MS200E-4B-A1/S010 Motor + 1MR200E-A066 Rotor + SINS-085HW Cylinder from EMAG VSC 200 Dou,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iaedpfx Amel Nqyde Ier

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO, Rexroth 1MR200E-A066 rotor + 1MS200E-4B-A1/S010 motor + P3130900 brake + SINS-085HW cylinder, used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ijdpol Nqx Sjfx Am Ioar

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO, Rexroth 1MR200E-A066 rotor + MS200E-4B-A1/S010 motor + S9124453 brake + SINS-085HW cylinder,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iajdol Nqyaopfx Am Ier

Condition: new, machine/vehicle number: 6d88bda3a1ee2464a81b34f36, empty load weight: 4 kg, maximum load weight: 13 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction, with slight pretensioning in the middle, turntable with strong ball bearing slewing ring, wheel chocks with holder, quarter-shell mudguards in front of and behind each axle Low loader lashing eyes over front axle: 2 pairs of ring lashing eyes, 5 tons each at the front on offset Lowbed: 4 pairs of lashing eyes on the side of the low bed, 6 tons each 5 pairs of lashing eyes per 5 tons between the side members Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (drawbar length 1 700 - 2 300 mm) Axles + suspension BPW drum brake axles, each with an axle load of 10 tons, axle adjuster. Axle endurance brake test to 105 km/h, rear axle can be removed manually. By releasing the air lock and lowering the rear to the ground. Then disconnect the connecting hoses from the rear section, insert the transport bar into one of the rear sockets and unhook the rear by gently pushing it down at the rear and pulling it back at the same time (parking brake released). After loading or unloading, drive up to the rear section and hook it in up to the mark. Then lift the rear section up to driving height and attach the connecting hoses. Confirm the pin lock. (Visually check whether the bolt engages) and check the rear function. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable clutch heads at the front, with connecting lines to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, rotating beacon with holder, switched via parking light (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 x 7-pin agricultural plug, voltage converter 12/24 volt (only for electrics, not for ABS/EBS) Floor Steel/ checker plate floor on offset, between longitudinal and cross member with perforated plate cover. Axle cover cannot be driven over, widening to 3000 or 3300 mm possible. Operating instructions Please note! A special permit is required for axle loads of 10,000 kg. The permit must be applied for individually in each federal state; the legislator does not have to give an approval for 20 tons GG. Customer risk. Special approval required if the overall length of the train exceeds 18 750 mm. Observe country-specific approval regulations. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Observe the BO circle!!! Approval / plates Country of registration: Germany, with Dekra approval and expert opinion (according to §13 EG - FGV), prepared for single-line license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Iedji Ri N Aspfx Am Isar Paintwork Front frame hot-dip galvanized incl. passivation, rear frame RAL9006 silver, drawbar KTL bla

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Iaedpfsubamvox Am Isr Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Iajdpfxowld Upo Am Isr Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm Iasdpfjwld Tfsx Am Ier 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Ijdpfx Aeyrf I Asm Iear Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: used, Year of construction: 2011, mileage: 265,853 km, power: 243 kW (330.39 HP), first registration: 01/2011, overall weight: 19,000 kg, fuel type: diesel, color: green, axle configuration: 2 axles, next inspection (TÜV): 04/2028, gearing type: mechanical, emission class: euro5, loading space volume: 9 m³, Equipment: ABS, air conditioning, Internal vehicle no.: G300460 German vehicle Available immediately at our premises in Kaufungen, Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Mercedes Benz AXOR 1833 Year of manufacture: 2011 265,000 km Sweeper VAL AIR BH9 HP 200 bar Water tank 3,000 l 9 m³ superstructure Engine hours: 15,458 h Operating hours hydrostatic transmission: 8,608 h Operating hours turbine: 6,016 h Operating hours low-pressure pump: 2,444 h Operating hours high-pressure pump: 1,807 h Financing example: * Internal number: G300460 * Purchase price: €34,900.00 * Down payment: 10% Iajdpjyfy Anofx Am Ijr * Term: 60 * Monthly installment: €536.24 Residual value: €6,380.00 If you are interested in this offer or wish to adjust it to your requirements, please contact us (Mr. Enchev). We look forward to your call Errors excepted We are happy to take your used vehicle in part exchange. Financing directly through us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, total height: 3,280 mm, overall weight: 24,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 25,000 g, number of axes: 4, This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. • Spindle center to table surface: 50 to 950 mm • Spindle nose to pallet center: 70 to 1,070 mm • Table / Pallet • Max rotation dimensions: 1,000 × 1,000 mm • Continuous table positions: 360,000 • Pallet change time: 7 sec • Pallet type: MAS perforated • Cooling through spindle: 20 bar • Compressed air pressure: 46 bar • Feed • Cutting feedrate: 60,000 mm/min • Positioning accuracy X-Y-Z: 0.004 mm • Repeatability X-Y-Z: mm • Tooling / Magazine • Tool change time (tool/tool): 1.9 sec • Tool change time (chip/chip): 4.4 sec • Tool selection: random • Max tool diameter (non-adjacent): 240 mm • Floor space: 3.38 × 6.11 m • Installed power: 50 kVA • Machine features Iaodjx D Hzyepfx Am Isr • Work area shower wash system: Yes • Presetting at table edge: Yes • Provision for probe / zero offset: Yes Additional equipment • Chip conveyor: Mayfran Dimensions Machine Depth 3380 mm

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 2200+1300-700-600 RA2189 Technical data: Iasdsq H T Saepfx Am Ior Conveyor length (NL): 3500 mm ( 2200 mm incline + 1300 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics