Used 6-Circuit Temperature Controller for sale (74,526)

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Includes 6 temperature measurements in the respective supply line Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Includes frequency inverter-controlled pump in the main circuit Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C Itedpfxozd Rtyj Aa Ijh to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Itedpfxjy Su Efj Aa Ieh

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Itedpfjy Su D Ujx Aa Ijh

Condition: ready for operation (used), Wittmann MTC Basic-C90 F27 Temperature Control Unit Single-Circuit Temperature Controller Price is for one unit. Several units available! Year of manufacture: 2017 Year of manufacture: 2017 Year of manufacture: 2018 Max. temperature: 90°C Isdpfx Aoyw Rh Hea Ioth Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to schedule a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check our further offers. Company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data and errors in the item description may occur and are subject to change.

Year of construction: 2017, condition: ready for operation (used), Wittmann MTC Primus-C90 F27 Temperature Control Unit Single-Circuit Temperature Control Unit Price is for one unit. Year of manufacture: 2017 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to arrange an inspection. We are happy to organize an affordable shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Itjdsyw Rfxepfx Aa Ioh Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the article description are possible and reserved.

Condition: excellent (used), Wittmann Temperature Controller Here we offer a Wittmann temperature controller. Wittmann Temperature Controller DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Iodezd Ruwepfx Aa Ieth Type: TR7B7D7D0X_09_00 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Itodpfx Aszdr Edja Ish Type: TS 1800 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Ijdpfx Aeya Iaqoa Ijth Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting Itjdpfx Aajb A Sv Te Ijh -Type: KROt-96/a,re11 -Setting value: from 0 to 1200 °C -220 V 5 A Price: per piece -Quantity: 2 available -Weight: 0.6 kg

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Ijdpfx Aaszbc Hbj Ijth Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2016, condition: ready for operation (used), A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment. Iodpfx Ajzfp Huoa Ioth

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions Itsdpfx Aom Dtm Asa Ieh - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, Temperature control unit Thermo Quick Duo Temperature control unit for chocolate Model: Thermo-Quick Duo with 2 removable bowls Iedpfx Ajygda Hja Ijth Control via thermostat (70°C) Connection: 230 V Dimensions: 760 x 410 x 240 mm (W x D x H) Used equipment We have many other units in stock!

Condition: excellent (used), Several HB-Therm flow meters and water distributors available. Condition: like new – from cleanroom production. The following variants are available: * 3-way * 5-way Itjdpfx Aow D Eh Iea Ijh * 6-way * 12-way * 13-way * 16-way Note: Original new prices can be found in the attached documentation. I would like to pay 1/3 of the new price.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 220 mm, total length: 825 mm, total width: 575 mm, type of input current: AC, control voltage: 220 V, DGUV certified until: 07/2027, Jufeba temperature control unit Tabletop model: TG 2-2 T Stainless steel design Dry heating Simple temperature control Top-quality technology Connection: 230V, ready for plug-in Iedpfx Aast U Uxue Isth Dimensions: 575 x 825 x 220 mm (W x D x H) Used unit, cleaned & SAB inspected Many other temperature control units in stock!

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, A dual-temperature control unit from Single is for sale. The original purchase price was approximately €5,100. Iedpfx Aaszbx Rps Isth Medium: Water Reinforced pump Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface, 20 mA PT 100 sensor Flow measurement Alarm

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, type of input current: AC, input current: 10 A, DGUV certified until: 06/2027, Jufeba TG 1-3 T temperature control unit TOP table-top unit with container Stainless steel design Dry heating system Manual temperature control Robust technology 230V connection Used unit, cleaned With warranty + spare parts service Optional: Maintenance contract Stainless steel GM container Delivery service Iedpfx Aexiu Hbea Ieth Training & commissioning Visit our large showroom!

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I can gladly send you a description of the unit! Medium: Water Iodpfx Aaeza U Dco Ijth Heating capacity: 9 kW Operating temperature: max. 160 degrees Celsius Cooling capacity: 40 kW Cooling: Heat exchanger Mobile

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR - DM General information: maximum 90 ° C water temperature range -robustes steel sheet housing device on wheels Hydraulic: Immersion pump (make Bacon) with pressure / vacuum function (leak stop operation) -Qmax. 60 l / min Pmax. 3.8 bar Tank and heater made of stainless steel Heating power 9 kW tank capacity 12 liters Fittings made of brass/stainless steel-automatic water filling -electrical level indicator -indirektes cooling system (plate heat exchanger) Itedpsd Aathsfx Aa Ijh Cooling capacity ~ 40,000 kcal / h (10 sheets) Display gauge -integrated bypass Solenoid valves for cooling and recovery Electrical and control: -Electronic, self-optimizing PCB control -electronic flow measurement Control voltage in the unit 24 V AC -Akustische and visual alarm indicator -Solid state relays Safety thermostat Sensor break monitoring Monitoring of tube breakage and leakage Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, The teco th 140 temperature control unit from GWK with indirect cooling is up for sale; it offers a wide range of features which I can provide upon request. The hose lines are also included. The unit will be inspected by GWK prior to delivery, with inspection costs already included in the sale price. Medium: Heat transfer oil, Marlotherm SH Heating capacity: 27 kW at up to 350°C Cooling capacity, indirect: 110 kW Iodpfsx Dcd Rox Aa Ioth Pump: 150 l/min at max. 7 bar Cooling via bypass with 3-way motorized controller Shut-off valve on supply and return Connection for PT 100 sensor Internal drip tray Dimensions: L: 1320 mm, W: 570 mm, H: 1720 mm Weight: 410 kg

Condition: used, machine/vehicle number: 462962, Temperature control unit from manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates as a single-circuit system with the RT 45 control system. Oil is used as the medium, with a maximum flow temperature of 250 °C. The heating capacity is 13.7 kW, and the pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 145 kg. Iedpfx Aaoy Su D Ie Ijth

Condition: used, machine/vehicle number: 543109, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Itjdpfxjy Su Dhs Aa Ijh

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Itodpfjy Su A Rsx Aa Ieh

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Itjdpfx Aaoy Su Aqo Ioh

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Iedpoy Su Adefx Aa Ijth