Temperature control unit

GWK teco cd90t18(9)

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 The plant consists of the following units: 1. Mill 2. Raw material filling unit Fedpfxox T Ar Ns Aivsgh 3. Air filter 4. Electrical switchgear

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm Fgodpfxem Twgwe Aivoh engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Fjdpfx Aeuk I Eteivjgh

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminum flat belt conveyor without substructure Belt length: 6000mm Drive roller: knurled Idler roller: crowned, over-rotated PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue, FDA compliant according to EU10/2011 Belt width 500mm, outside Wave edge welded on both sides, 40mm high T-30 studs (61 pieces) - 200mm pitch * antistatic due to threads in the fabric of the running side Endlessly welded with a stepped finger joint Food-grade certificate included Fgjdpfjg D T N Hjx Aiveh V2A stainless steel backing plate, full surface Drive: Motor approx. 1.1kW - horizontally mounted * optionally controllable with a frequency converter Connection 220/

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Fgoded Tidxspfx Aiveh Mobile on steerable castors Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/accumulation conveyor Angle-adjustable conveyor belt with hopper in the infeed section available for short-term delivery Example: NI 1 Length 1500 mm Fodpfx Aeh Nyp Ueivogh Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable stop rollers Optional: other dimensions, see standard delivery list dimensions according to customer requirements FDA-compliant belt modified belt speed etc.

Condition: excellent (used), Year of construction: 2004, Dryer Fsdpfjumnknex Aivegh Wittmann Drymax C30-30-P Year 2004 Conveyor units year 2005 2 pieces available

Condition: good (used), Year of construction: 2003, CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º indexing) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 8,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Fgedpfxjxq Hcke Aivsh Signal lamp High-pressure pump Internal coolant supply

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Fgodpfx Aju Ti Tvsiveh Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system Fgsdpfx Aijg Ey T Esveh -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.