Used 1994 Elumatec Mgs 205 for sale (1,849)

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Manual swiveling with digital display Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Stepless saw blade feed Minimum quantity spray device Weight: approx. 1,000 kg Kljdpfx Aoynacyemrju

Year of construction: 2021, condition: used, Max. saw blade diameter: 380 mm Stepless saw blade feed via two-hand operation Klsdpszf D Adsfx Amrju Pneumatic material clamps Minimum quantity spray device Weight: about 350 kg

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Klsdpfxezf Agzj Amrju Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg

Condition: reconditioned (used), power: 2 kW (2.72 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 370 mm, saw blade bore: 30 mm, actuation type: mechanical, rotational speed (max.): 2,800 rpm, total length: 10,000 mm, total width: 1,000 mm, total height: 1,400 mm, overall weight: 230 kg, table height: 900 mm, Equipment: saw blade guard, elumatec MGS 72/30 miter saw mounted centrally on a base frame, with infeed roller conveyor, handwheel stop with scale chip extraction Saw: Swivel range from 0° to 45°, Klsdpfx Aszaq Tyjmrju infinitely adjustable on both sides locking points at 15°, 30° and 45° saw blade diameter 370 mm saw blade speed 2,800 rpm power connection 230/400 V, 3 ~, 50 Hz power 3 kW length 780 mm, depth 900 mm, height 815 mm weight 120 kg stable, ground, continuous support table with rotary table on precision bearings low-wear and quiet drive via multi-wedge belt manual saw feed machine overhauled

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Kjdpfx Aey Uyfpomrjlu

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) Kjdpfx Ajyg Rfcemrolu This lot is located in Farnworth, Bolton. Collection must be made on Tuesday 3rd March 2026.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0721040674, saw blade diameter: 380 mm, Mitre saw elumatec MGS 72/10 for cutting aluminum profiles Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Kljdpjyxgynjfx Amrsu Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Manual saw feed Pneumatic material clamping unit Pulsed coolant system The machine is ready fro operation

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0733336662, Mitre saw elumatec MGS 73/33 Versatile for use with aluminium and PVC profiles Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Hydro-pneumatic saw feed 2-hand operation Pneumatic profile clamping (2x horizontal, 1x vertical) Pulsed coolant system Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Kledsy Nncrspfx Amrou Compressed air supply 7 bar Length 850 mm, depth 900 mm, height 1,450 mm, weight 220 kg Machine is ready for operation

Condition: used, Year of construction: 2007, Technical data: Klodpfx Amerwlwverou Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Kledjuiy Ngjpfx Amreu Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Kledpfxsxyupke Amrju Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Kedpfewwau Njx Amrjlu Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2011, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 18.000 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm Klodpfx Aszcm A Nemrou A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm. Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Many tool holders, including angle head and saw blade Saw blade diameter: 500 mm minimum quantity spraying Autonomous belt tensioner shift 20 pneumatic material clamps Pendulum operation through two light barrier areas label printers Barcode scanner chip conveyor belt suction Manual control console Spindle in like-new condition (infeed force is approximately 16 kN) Loading is included in the price Weight: approx. 14,000 kg

Condition: good (used), Year of construction: 2021, machine/vehicle number: 161000228, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 280 mm, rotational speed (max.): 4,100 rpm, total length: 10,000 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 700 kg, saw blade speed: 3,200 rpm, ELUMATEC TS 161/21 Undercarriage Circular Saw - Power: 1100 W Kljdozdyrrspfx Amrsu - Swivel range: 90° to 45° to the left and 90° to 0° to the right - Includes digital length stop with HECHT manufacturer's control system, as well as a bilateral roller guide, width: 90 mm Attention: the item must be picked up on a fixed date of July 2, 2026, at a time to be agreed upon. FCA D-72770 Reutlingen – loaded onto a truck.

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 223002360, milling height: 150 mm, input voltage: 400 V, overall weight: 700 kg, total length: 1,700 mm, total width: 1,000 mm, total height: 1,600 mm, input frequency: 50 Hz, milling length: 400 mm, pivoting range: 60 °, rotational speed (max.): 2,800 rpm, ELUMATEC AF 223/01 Notching milling machine - Rated current: 6.1 A - Power consumption: 2500 W - Swivel range: up to 60° to the right and left - Max. milling depth: 110 mm - Max. profile height: 200 mm - Max. cutter diameter: 280 mm Kjdpszdyqnsfx Amrolu - Cutter mounting bore diameter: 40 H7 mm Attention: The item must be collected on July 2, 2026, at a date to be confirmed. FCA D-72770 Reutlingen - loaded onto a truck.

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Kedpfxezdi Nmo Amrjlu

Condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Kjdpeza Aaxsfx Amrslu Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material clamps Automatic feed minimum quantity spraying Weight: approx. 200 kg

Condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material clamps Klsdpfx Asza Aa Eemrju Automatic feed minimum quantity spraying Weight: approx. 200 kg

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. Kljdpfx Amohvrz Tereu 6.000 mm

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of axes: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. It features a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, making it suitable for machining aluminum and thin-walled steel profiles. The machine includes an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining centre we have for sale. Contact us for further details. • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining range: 0°–180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travels: • A-axis rotation: 0°–180° • A-axis programming increment: 0.1° Klodozaq Eiopfx Amrju • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: Air-cooled • Tool magazine: 8 positions, co-moving for fast tool changes, expandable system • Machine features: Stationary profile machining, fast automatic tool changes, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15” color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum mode / 2 working zones (optional configuration)

Year of construction: 2003, condition: good (used), Elumatec profile machining centre, model SBZ 130. 8-position tool changer 2 machining zones for shuttle mode Length: 7,200 mm Klodpey Uzy Usfx Amreu Automatic clamping adjustment

Year of construction: 2007, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. Travel distance X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel range Z-axis: 325 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Bidirectional angle head and a high-speed spindle Kljdpfx Amew Axfqsrou Wrench measurement 8 pneumatic material clamps Light barrier Very good condition

Year of construction: 2003, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. Processing length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Kljdpfx Aouwq S Domrou Swivel angle A-axis: 0° - 180° Max. Speed 21,000 RPM Windows operating system minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed fume extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg Very good condition

Condition: used, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Ksdpfx Aey Tlgcomrolu Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using side guides or templates in a 1:1 ratio Pneumatic copying stylus with two stages for two different cutter diameters The patented suspension of the copying lever guarantees precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via "spindle lock" Pneumatic material clamping device Metering spray device Options Copying templates milled to standard dowel hole and PZ milling pattern Copying stylus Collet Guide system Material clamping device with 2 clamping cylinders Milling tool 8 mm Availability: short-term Kedpfx Amsxqihijrslu Location: Röllbach