2003 Elumatec SBZ 140

Elumatec SBZ 140

Condition: excellent (used), Year of construction: 2011, The machine in a very good condition. 7,6 meters long, 2 working places. Possible to give a warranty up to 6 month. Nedpfx Aqeyia Ezjwslf

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Nsdov Eguyepfx Aqwslf Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025.

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of axes: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. It features a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, making it suitable for machining aluminum and thin-walled steel profiles. The machine includes an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining centre we have for sale. Contact us for further details. • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining range: 0°–180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm Nodpfx Aqszaq Eijwjlf • Axis travels: • A-axis rotation: 0°–180° • A-axis programming increment: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: Air-cooled • Tool magazine: 8 positions, co-moving for fast tool changes, expandable system • Machine features: Stationary profile machining, fast automatic tool changes, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15” color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum mode / 2 working zones (optional configuration)

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Nledpfx Aszbb Rroqwsf

Condition: good (used), • Facet grinding machine • Year of manufacture 1990 Nlodpovxthtjfx Aqwjf • Comes from ongoing production • More information on request

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 6,4m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Nljdpfx Ajy Aafxoqwof

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Nledpfxszf I Uwo Aqwof Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Nljdpfxswwtw Do Aqwsf Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner Nlodozhuyfjpfx Aqwsf The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Nlodoy Ah Tkjpfx Aqwjf Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. Nledpfx Aqju R Szaowsf - new exhibition machine -

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. Njdpsxy Hcisfx Aqwelf TECHNICAL DETAILS Workpiece length: 7,900 mm Speed: 21,000 rpm MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,280 h, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, swivel angle A-axis (max.): 180 °, TECHNICAL DETAILS Max. machining length without end face processing: 4,200 mm Max. machining length with end face processing: 4,080 mm Travel distances X-axis travel: 4,200 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Traverse speeds X-axis traverse speed: 65 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 60 m/min Swivel range A-axis: 0° - 180° Positioning accuracy X-axis positioning accuracy: ± 0.1 mm Y-axis positioning accuracy: ± 0.1 mm Z-axis positioning accuracy: ± 0.1 mm A-axis positioning accuracy: ± 0.1° Max. spindle speed: 24,000 rpm Nedpfxjw Svmie Aqwolf Spindle rated power: 7 kW S1 Tool holder: HSK-F63 Max. cutter diameter: 80 mm Max. saw blade diameter: 200 mm MACHINE DETAILS Air consumption: approx. 180 l/min Machine weight: 4,200 kg Operating hours Spindle hours: 1,280 h Machine hours: 13,066 h

Condition: new, Year of construction: 2025, Modern, high-performance, and universal double miter saw for wood, aluminum, and plastic profiles. Nljdsxta Tuopfx Aqwsf Stock machine: Subject to prior sale • Large cutting capacity (165 mm cutting depth at the table) • Double cut possible • Stepless fixation of intermediate angles • Pneumatic swivel function as standard • Infinitely adjustable hydropneumatic saw feed • Torsion-resistant machine bed • Swivel range for both units: 22.5° inward, 90°, 135° outward • Precision-ground saw table / base plate • Direct position measurement system (magnetic sensor) available in all versions • JETTER drives and controls • 15″ industrial touch panel (IP65)

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Maximum machining length: 3,100 mm Y-axis travel: 850 mm Nedpoxvp Nkefx Aqwjlf Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Loading is included in the price