Machining center Elumatec SBZ 151

Elumatec SBZ 151

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Gbjdjwwtw Djpfx Afken Additional tehnical specifications available on request

Condition: good (used), Year of construction: 2014, machine/vehicle number: 9911832, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: HSK F63, tool diameter: 20 mm, tool length: 150 mm, tool weight: 3,000 g, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW Gsdpfx Afju Dl R Uskobn - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm - Centralised lubrication

Year of construction: 2007, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 9,000 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm. Gjdpfsxwydbex Afkebn Spindle power: 21 kW Tool changer with 13 standard and 7 special tools minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Loading is included in the price Weight: approx. 8,500 kg

Condition: new, power: 152 kW (206.66 HP), fuel type: diesel, number of seats: 35, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, - Thermal and acoustic insulation of the passenger cabin - Electric front door - Rear emergency door - Reclining seats with 3-point safety belts - TEGO wooden floor with wood-effect covering - Aluminium profile along the aisle with LED lighting - USB sockets - Safety panoramic glass sliding roof - LED lights on ceiling tubes with LED illumination - Hammer for emergency exits and signage - Handrail and grip on a pillar for easy access Gjdpjvi Dtuefx Afkjbn - Air conditioning for passengers - Auxiliary parking heater Customers reading this advertisement on TruckScout, please request additional photos via email as this portal is limited to 15 images!

Condition: used, mileage: 100 km, power: 390 kW (530.25 HP), first registration: 05/2026, fuel type: diesel, overall weight: 28,000 kg, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater, soot filter, tail-lift, Additional information: * Payload: 13516 kg * Wheelbase: 670 cm * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2000 kg * Tail lift | Type: Tilting and sliding tail lift Additional features: * 9-ton front axle * Adaptive cruise control * Aluminum fuel tank * Anti-lock braking system * Anti-slip regulation * Automatic climate control * Heated mirrors * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic braking system (EBS) * Speed limiter * Cruise control * Intarder * Camera * Air conditioning * Refrigerator * Air suspension * Fog lights * Parabolic suspension * Particulate filter * Rain sensor * Retarder * Disc brakes * SemCollection * SemStars * Auxiliary heater * Stand-alone air conditioning * Power take-off (PTO) * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly request you to inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Gedpfxey Ng Uge Afkobn Subject to changes, prior sale, and errors.

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Gbjdpfx Afexhg Dioksn Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: used, mileage: 32,169 km, power: 137 kW (186.27 HP), first registration: 09/2024, fuel type: diesel, number of seats: 34, gearing type: automatic, next inspection (TÜV): 09/2026, emission class: euro6, color: white, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ? REAR PARKING SENSOR ? SAFETY HAMMER, CABLE ? REAR TOW HOOK PREPARATION FOR LD VEHICLES 3.5 TONS ? TRAILER SOCKET, 13-PIN ? REVERSING CAMERA ? HEATED WINDSHIELD ? CRUISE CONTROL ? INFOTAINMENT + DVD + ETC. (DAB+) ? SWAN T INFOTAIN ? OTAINMENT Gbedpfsyw Eywsx Afkon ? SCHOOL SIGN, LED, 25x25+40x40 ? AIR HEATER, 1ST DOOR AREA, 8 kW ? 2 PCS. SUN VISOR ? 3-POINT SAFETY BELT ? USB CHARGER (UNDER THE SEAT)

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, number of seats: 49, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater,

Condition: used, mileage: 90,300 km, first registration: 08/2017, fuel type: diesel, tire size: 445/95 R 25, axle configuration: 6x6, fuel: diesel, brakes: retarder, suspension: hydraulics, total length: 11,840 mm, total width: 2,540 mm, Year of construction: 2017, Equipment: ABS, AdBlue, crane, cruise control, electric window regulation, retarder, = Additional options and accessories = - Mechanical tachograph - Hub reduction Gjdpfxjzb Huis Afksbn - PTO (Power Take-Off) - Radio/CD player = Further information = Axle configuration Front axle: Tire size: 445/95 R 25; Steered; Left tire tread: 40%; Right tire tread: 40%; Suspension: hydraulic suspension Rear axle 1: Tire size: 445/95 R 22.5; Steered; Left tire tread: 50%; Right tire tread: 50% Rear axle 2: Tire size: 445/95 R 25; Steered; Left tire tread: 50%; Right tire tread: 50% Weights Unladen weight: 35,850 kg Payload: 150 kg Gross vehicle weight (GVW): 36,000 kg Functional Lifting capacity: 50,000 kg Crane: Year of manufacture 2020 Condition Damages: none Identification Registration number: 96-BJT-9

Condition: used, mileage: 709,894 km, power: 338 kW (459.55 HP), first registration: 06/2017, fuel type: diesel, number of seats: 63, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2017, Equipment: ABS, air conditioning, bathroom, parking heater,