Used Gebhardt 2000-1320-1260 for sale (7,790)

Condition: ready for operation (used), Fanuc A06B-0266-B100 AC servo motor SN: C03XA7279 with A860-2000-T301 pulsecoder SN:161630030924, used, in good condition, 100% functional, delivery as per photos. Bjdpsy Nn Uhjfx Aqtjli

Condition: ready for operation (used), Fanuc A06B-0225-B000 AC servo motor SN: C049X7373 + A860-2000-T301 pulsecoder SN: 312253, used, normal signs of wear, 100% fully functional, scope of delivery as shown in the pictures. Bedpfx Aqex Dt Duetsli

Condition: new, Fanuc A06B-0213-B100 AC servo motor, with pulse encoder A860-2000-T301, mounting hole spacing: 70 x 70 mm, unused, in very good condition, 100% functional. Bodpfx Aqoi D Hyxetoli

Condition: new, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, ZWF/W 18 Center Tube, Central Axle Lift Trailer, Tire Size 22.5, Single Dimensions Chassis designed for interchangeable bodies from 7150 to max. mm (symmetrical bodies) Chassis designed for rear-flush mm (with impact buffer) Test lowering heights: ZWF: Vehicle must lower at least +70mm and raise -20mm, WF: +60mm/-20mm, WFS: +60mm/-20mm Axle loads: 18,000 kg (2 x 9,000 kg) Spring center approx. 1300 mm Support load approx. 1000 kg Lowering heights approx. 1120 to max. 1320 mm via air suspension of the trailer and the tractor unit Coupling height (low coupling) approx. 400 mm unladen Ride height unladen approx. 1100 mm 2nd ride height, if axle lift is used, is approx. 40 mm higher (tire lift via axle lift increases the ride height), only if necessary Ground clearance approx. 1070 mm on level ground Chassis No. generally stamped on the side of the longitudinal member, right side, approx. 100 mm from the front E-wheel holder Prepared for E-wheel holder in winch design for 1 E-wheel Front stop, foldable and adjustable for 7150 mm symmetrical interchangeable bodies Support winches 1 set of drop-leg supports at the rear, height-adjustable 1 set of support winches at the front Coupling device Coupling spring travel approx. 1400 mm Intermediate distance 760 mm (with mm interchangeable body) Connection lines for lights/brakes, route lines inside/on the drawbar on the right Storage for connection lines on the side of the drawbar Drawbar rigid (center tube) with bolted drawbar eye Drawbar eye ø 50 mm SMB axle with Haldex/Wabco/Knorr brake and Weweler air suspension selected 2x axle with large disc brake (430, or 4309/4312/4345) 2x axle 9t 22.5 disc brake, single tires for air suspension Bellows plates, rotate at 340-400 lift (not on the bogie, not with SMB) Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Axle distance approx. 1360 mm (with total lift of approx. 300 mm, 340 mm or 400 mm) 2x air suspension, total lift approx. 400 mm 1 coupling head each, red and yellow Test nipple for brake cylinder pressure on the brake cylinder at the front right Air reservoir 2 x approx. 80 l in steel, painted black (1x brakes, 1x lifting and lowering) Lifting and lowering device at the rear left in the direction of travel Tire pressure control, basic version, connected to the CAN bus system of the EBS Brake/ABS EBS brake system, manufacturer Knorr/Wabco/Haldex at our choice, with Roll Stability Program 2x wheel attachment by center centering 4x tires 385/55 R 22.5 instead of 385/65 22.5, brand manufacturer at choice, system on -wheel 11.75 x 22.5 Brand tires 385/55 R 22.5 at choice Spiralflex Spiralflex cables and hoses for light and brake connection to the tractor unit, with mounting plate (standard) 15-pole plug or socket at the front Lighting system 24 Volt with large multi-function lamp Blsdpszir Ipefx Aqtoi Lighting system/wiring system, manufacturer at our choice (closed lighting system) License plate lighting Rear lights (LED) under the rear container support, beam of light to the rear Rear lights (LED) at the very front, under the stop, beam of light to the rear Side marker lights (LED), flashing (all SIDE lights flash), attention! Possible problems with tractor units! 9 (min.)-pole cable as connection front-rear (min.) Position lights (LED) mounted on a separate holder (not attached to the lamp) Position of position lights: Mounted on the underrun protection (if there is a kink to the rear, the UFS will not be pinched) Position light (LED) at the

Condition: used, Year of construction: 2024, Working widths 2000 mm Roller width 2200 mm Number of rollers 2 Stück Supporting roller - dia 270 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 210 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 11 to Cloth guiding system Breithalter,1 Leitwalze Drive side nach Auftrag Operting side nach Auftrag Liquor trough with displacer + Leitwalze Capacity of dye tub 60 Liter Drive shaft 70 mm dia Hydraulic unit for combined pressure aus Edelstahl Compensator pneum. Entlastung Drive for 60 m/min • 2-Bowl-Finishing padder with one "Swimming Roll" (S-roll), Machine is completely overhauled before delivery, we supply with warranty. (Photo shows a machine in delivered condition). Bodpfstv H T Esx Aqtoli An additional new frequency drive for fitting the machine into a plant is possible.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless Bsdpfxjlatv Ae Aqtsli - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 08/2027, electrical fuse: 16 A, input frequency: 50 Hz, Mixing machine / whipping machine TOP Rego model: SM 2000 M The machine for all your mixing and whipping needs! with timer control 2 operating functions: 1 x mixing / 1 x whipping 1 mixing whisk, 1 whipping whisk 1 32-liter stainless steel bowl Bowl lighting Connection: 400V, 16A-CEE plug Quality from a specialist company! Bjdpfx Asw Hk Dasqtsli Used machine, refurbished with warranty and spare parts service Option: additional accessories More TOP mixing machines in stock!

Condition: used, Year of construction: 2000, Overview This FAMIX-Falterbaum 20000TD premix system, manufactured in 2000, is a fully automatic beverage mixing and carbonation system designed for continuous dosing, mixing, deaeration and carbonation of beverage components before filling. The system is suitable for the production of mixed and carbonated beverages using components such as water, syrup and CO₂. It is built as a compact stainless steel skid with integrated tanks, pumps, valves, piping, instrumentation and control cabinet. The premix unit has a capacity of approx. 22,000 l/h and includes two vertical stainless steel pressure vessels, which can be used for product deaeration, buffering and carbonation. The liquid flow is controlled via automated pneumatic valves and a manual stainless steel pipe connection panel, allowing flexible routing for production and CIP operation. The machine is operated via an integrated FAMIX control cabinet mounted directly on the skid. Inline measuring technology is installed in the stainless steel piping for process monitoring, such as Brix, flow or density control. The system is suitable for beverage producers requiring precise continuous beverage preparation ahead of the filling process. Technical Data - Manufacturer: H. Falterbaum FAMIX-Maschinenbau GmbH - Model / Type: 20000TD Blsdpfx Aszcgabsqtsi - Machine Type: Premix / beverage mixing and carbonation system - Year of Manufacture: 2000 - Capacity: approx. 22,000 l/h - Application: Continuous mixing, dosing, deaeration and carbonation of beverages - Product Components: Water, syrup, CO₂ and beverage components - System Design: Compact stainless steel skid with integrated piping and process equipment - Process Functions: Product deaeration, buffering and carbonation - Construction: Stainless steel frame, tanks and piping - Condition: Used, installed in industrial beverage production environment

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic Blodpfxoywzbds Aqtoi -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: used, Osmosis / water treatment system with Heyl testomat 2000 further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Bedpfx Aotzxuysqtoli sample photos sample pictures A viewing in Rietberg is possible! If you have any further questions, please contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material and legal defects! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: new, mileage: 11 km, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Additional options and accessories Blodpfx Aqszgqcajtoi Engine * MX-Engine brake * Fuel tank capacity tank 2: 620 * Number of fuel tanks: 2 Interior * Central locking * Electric mirror control * Heated seats * Rear view camera * Stationary air conditioning * Tachograph: digital * Air-suspended seat Lighting * Headlight type: LED Safety Systems * ESP * Forward collision warning * Lane departure warning Superstructure * Trailer coupling More information Transmission: 12 gears, Automatic Cab: XG Tyre size: 315/70 R22.5 Brakes: disc brakes Rear axle 1: Lift axle, Steering Wheelbase: 505 cm Number of seats: 2 Number of berths: 2 Dealer information As the largest German DAF dealer, we are proud to offer the entire product range of the Dutch manufacturer in the Ruhr area and the Cologne area, and to contribute to this success. Our goal is to relieve you of as much work as possible regarding vehicles and day-to-day operations. This includes the product itself, the related services, and, not least, the human interaction. Let our advice and service convince you. Our team will be happy to assist you. With our four centrally located sites, we cover a large part of North Rhine-Westphalia and are easily accessible. We would be happy to visit you, or you can take the opportunity to visit us at our sales locations in Dortmund/Cologne. We always have a large selection of new vehicles available for quick delivery. Our new vehicle warehouse alone includes a constant selection of 70 to 100 vehicles – a real highlight in the market. Visit us at or call us on

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Centreless cylindrical grinding machine | Brand: TOS HOSTIVAR Model: BUB 50/2000 | Year of manufacture: 1989 The machine can be inspected by prior appointment under power. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS Machine working range: - Swivel diameter: 500 mm - Swivel diameter in open die: 10–140 mm - Diameter in closed centre: 10–130 mm Centre distance: 2.000 mm Workpiece headstock and tailstock: - Workpiece headstock, only towards the grinding headstock, swivels by: 90° (degree) - Chuck diameter: 200 mm - Taper in the workpiece spindle: MORSE 5 - Travel of the tailstock quill: 40 mm - Taper in tailstock quill: MORSE 5 - Front end of the workpiece spindle, size 5 - Cross-travel of tailstock centre: +0.1 - Tailstock clamping force: 0 – 4.000 N Grinding headstock: - Grinding headstock can be swivelled by: -15°, +45° (degree) - Adjustable via ball screw by: 310 mm - Total travel: 370 mm - Rapid traverse range of the headstock: 60 mm Grinding wheel: - Dimensions of the grinding wheel: 500 x 80 x 203 mm - Diameter of a partially worn grinding wheel: 380 mm - Max. width of the grinding wheel: 125 mm Machine table: - Min. table travel: 1 mm - Max. table travel: 2.200 mm - Table speed, infinitely variable: 0,05 - 5 m/rev - Table feed rate: 6 m/rev Bodpfx Aszfqbmjqtoli - Dressing speed: 0,05 - 5 m/rev - Table swivels through: +6° to -3° (degree) Dimensions / weight of workpiece: - Max. workpiece mass * when clamped between centres: 350 kg * when clamped in a free-hanging position, including clamping device: 60 kg Speeds: - Number of speed settings for the grinding spindle: 2 - Grinding spindle speeds: 1.720, 1.980 rpm - Peripheral speed of the grinding wheel: 45 m/rev/sec - Number of speed settings for the drive disc, with stepless ranges: 2 - Drive disc speeds: 18 - 112, 90 - 560 rpm Drive: - Total power requirement of the machine: 16 kVA Machine dimensions: - Machine footprint, including overhangs: * Length: 7.260 mm / Width: 2.570 mm - Machine weight with standard accessories: 6.5 tons A wide range of accessories is included in the sale. No guarantee is given as to the completeness or accuracy of the technical specifications and the equipment. - Subject to prior sale -

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s Bsdpog S R Twjfx Aqtoli pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz Bodpfx Asd Ih Ncoqteli voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: used, sheet width 2000 mm plate thickness 3 mm rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg Bodpfxsxfwdzo Aqteli

Condition: used, Year of construction: 2000, Overview Bodpfx Aozb A E Djqtjli This Bohrer R40 crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built in stainless steel and is suitable for integration into industrial crate handling systems. The system includes a stainless steel washing housing, integrated fluid collection basin, conveyor sections for crate transport, access platforms and safety walkways. The machine was observed in a wet production environment with crate conveyor tracks and facility piping connected to the washing area. Operation is carried out via an integrated control panel with push-buttons and indicator lights. Technical Data - Manufacturer: Bohrer Maschinenbau - Model / Type: R40 - Machine Type: Crate washing machine - Year of Manufacture: 2000 - Origin: Regenstauf, Germany - Application: Washing / cleaning of beverage crates - Construction: Stainless steel housing and machine frame - Conveyor System: Integrated crate transport / conveyor sections - Washing Area: Enclosed washing chamber with splash protection - Fluid Handling: Stainless steel collection basin and drainage system - Access: Stainless steel stairs and maintenance walkway with grating - Control System: Integrated operator panel with push-buttons and indicator lights - Electrical Supply: 400 V Frequency: 50 Hz Connected Load: 26 kVA

Year of construction: 1980, condition: good (used), with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Bjdskzg E Ajpfx Aqtsli Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Bledpfx Ajzd Su Eeqtoi Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot with conveyor belts for loading and unloading. The machine can also be sold without robot. *

Year of construction: 2025, condition: ready for operation (used), A like-new dosing machine Gabler, manufactured by Volkmann and used only once for testing purposes, is available. Screw conveyor: 10m, Conveying height: 3m, Conveying capacity: 600kg/h, Bulk density: 0.6-0.7kg/l, Particle geometry: Powder, Min. particle size: 5µm, Product feeding station: RNT180, Vacuum conveyor: PPC250VS, Product feeding: Bag emptying, Filling volume vacuum conveyor/product feeding station: 17l/400l. Machine dimensions X/Y/Z: approx. 1000mm/750mm/2200mm, Weight: approx. 250kg. Documentation available. An inspection on site is possible. Bodezidh Uepfx Aqteli

Condition: used, Year of construction: 2011, fuel type: diesel, Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Bljdpfszdd Iljx Aqtei

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. Bjdpfx Aqewm Nq Eeteli • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: good (used), TASKI Swingobot 2000 autonomous scrubber dryer Manufacturer: TASKI / Diversey Model: Swingobot 2000 Type: COR2000 Machine type: Autonomous scrubber dryer Condition: used, fully operational Operating hours: approx. 38 hours Serial number: 7524396000434 Operating voltage: 24 V DC Power consumption: 1500 W Weight: 471 kg Working width: 700 mm Suction nozzle width: 900 mm Fresh water tank: 90 l Bodpszd Eyuofx Aqteli Operating time: up to 4 hours Theoretical area performance: up to 1,260 m²/h Protection class: IPX3 Operation: autonomous or manual Navigation system: LIDAR and sensor system Touchscreen control panel Emergency stop switch Location: Teningen-Nimburg

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data - Manufacturer: Krones / Krones Zierk GmbH - Model / Type: K6W-25-S-E - Machine Type: Crate washing machine Bsdpfx Ajzb Ad Teqtoli - Year of Manufacture: 2000 - Application: Washing / cleaning of beverage crates - Construction: Stainless steel machine housing and frame - Conveyor System: Integrated slat-chain conveyor and crate transport sections - Drive System: Electric drive motor with gearbox - Inspection Access: Viewing window with safety latch hooks - Control System: Integrated electrical control cabinet - Operator Panel: Push-buttons, indicator lights and red rotary main switch - Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A

Condition: used, mileage: 358,000 km, power: 194 kW (263.77 HP), first registration: 05/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, brakes: engine braking, color: white, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2021, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, tail-lift, General information Number of doors: 2 Registration number: 89-BRP-3 Technical information Number of cylinders: 6 Engine capacity: 6.700 cc Front axle: Max. axle load: 7500 kg; Tyre profile left: 25%; Tyre profile right: 25%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: air suspension Weights Empty weight: 8.649 kg Carrying capacity: 10.351 kg GVW: 19.000 kg Functional Tail lift: Dhollandia, 1998 kg Financial information Price: On request = Additional options and accessories = - Aluminium fuel tank - Hardwood floor - Heated driver's seat - Heavy duty engine brake - LED- lighting - Lock diff - Outside temperature display - Radio/CD player - Visor - Wooden floor Blodpfx Aszdpgxjqtoi = Remarks = Geisoleerde Hertogs box Dhollandia 2.000 kg 2x Biding rails Rolstop

Condition: used, Year of construction: 2006, operating hours: 60,000 h, clamping force: 200 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 9,500 kg, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request Bsdpfx Aqjyzt R Sstjli terms of payment: 100% prior to delivery