Used Gebhardt 2000-1320-1260 for sale (7,313)

Condition: used, Year of construction: 1988, Technical details: plate width: 2050 mm plate thickness: 2 mm distance between columns: 2400 mm knife length: 2050 mm stroke adjustment: oben 250 mm adjustment of stroke: unten 100 mm bending angle max.: 180 ° back gauge - adjustable: mit Aufnahmeschienen mm working pressure: 5,0 MPa total power requirement: 2,2 kVA weight of the machine ca.: 2,3 t dimension machine xH: 3,5 x 1,0 x 2,2 m dimensions of hydaulic: 0,75 x 0,55 x 0,80 mm HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam = 100mm bending jaw stroke = 100mm bending gap = 7mm with scale display Nsdpfxou Ib Dfs Amnewg *

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 Nwodpfx Asu Id Dbomnsg - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm Nwodpfsu Ix Dcjx Amnog turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm Nwjdpfx Amewnfu Nonjg plate height: 180 mm transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm *

Condition: used, Make: Leomotor A/SType: KC 218B159 - LM 2000 - 12630 Nwodpfxodc A Rno Amnog

Year of construction: 2024, condition: new, SPECIAL ACTION: Folding press AD-S 1260 length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Nsdpfx Aod R Dhpemnswg Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request.

Condition: not inspected (used), Year of construction: 2011, machine/vehicle number: 61015538, This KraussMaffei 350-2000 AX injection molding machine, manufactured in 2011, will be auctioned off, including a conveyor belt manufactured in 2023, in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG - Machines, Tools, Workshop Equipment, etc." This and many other items from the field of injection molding technology, production & workshop equipment, temperature control units, lifting equipment, erosion machines, measuring instruments, transport & social area equipment, etc. can be found on our RESTLOS auction platform! Nameplate data: Manufacturer: KraussMaffei Injection molding machine type: KM 350-2000 AX International size designation: KM 2000 AX/350 Year of manufacture: 2011 Nodpfx Aoy Ux Hlomnowg Machine No.: 61015538 Machine weight: 22,600 kg CE marking: present Manufacturer: KraussMaffei Made in: Slovak Republic Nameplate data: Conveyor belt Designation: LIGHT CONVEYOR Model: CPT2021 ALL Year of manufacture: 2023 Serial number: C23690 CE marking: present Manufacturer: MB Conveyors srl as shown in the pictures without any other items shown in the pictures Functionality not tested

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min Nedpfxey S Tm Uj Amnewg spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot conveyor belts for loading and unloading. The machine can also be sold without robot. *

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 4016TAG1A, General information Field of application: Construction Weights Empty weight: 5.847 kg Functional Generator capacity: 2.000 kVA Dimensions of cargo space: 575 x 230 x 302 cm CE mark: yes Other information Fuel consumption: 277.6 Liter at 75% Load Generator: Leroy Somer LL9224F Frequency: 50 Voltage: 400 Drill equipment: Control Panel Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = Nwsdpfx Amsyqmhnsneg - Control Panel

Condition: used, Electric chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1 Nsdpfxokwh H Ae Amnowg Fab. No. 1524132 Year of construction 1997 lifting capacity 2000 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. load strands 2 Cable length control bottle approx. 0,9 meter rated power 1,6 kW / 0,36 kW Rated current 4.3 A / 2.5 A Mains connection 400 Volt, 50 Hz - Suspension eye on the top of the crane - emergency stop weight 75 kg good condition

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder Njdpoifu Anjfx Amnjwg - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication Nwodpfx Asdzp Tcsmneg - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: new, ELWA ETR 96 Type R 2000 - EL21-1 SN: 2474-021, unused in original packaging, 100% functional, scope of delivery as per photos. Nodey Rckyopfx Amnewg

Condition: excellent (used), Sandingmaster 2000 Nodpfxjy R U D Ee Amnowg - Feed rate: 4–16 m/min - 16 kW - Sanding width: 900 mm - Year of manufacture: 1995 - Dimensions: 1800 x 1800 x 2300 mm Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: used, axle configuration: 3 axles, first registration: 02/2005, color: other, Year of construction: 2005, Empty weight: 6.720 kg Axle 1: left 10 mm right 10 mm Axle 2: left 5 mm right 12 mm Nodpfx Ajyxrcuomnjwg Axle 3: left 12 mm right 5 mm

Condition: used, Year of construction: 2013, operating hours: 6,842 h, Equipment: ABS, all wheel drive, Manufacturer HAKO Model Citymaster 2000 4x4 Year 2013 Nsdpfx Aowlydtemnewg Condition Very good Serial Number WMU2X56B50WL00043 Ref. nr. 1067801 Reg. date: Engine: VW Diesel 4 Cylinder Hk: 102 Eurotype: 5 Rear view camera: ? Cabin heater: ? Air conditioning: ? Radio: ? Tire Size: 215/70R15 Cover% left 40 - 40% Front suspension: Springs Suspension rear: Springs Hydraulic system: ? Total weight: 4900 kg. Manufacturer: HAKO Citymaster 2000 Hours: 6842

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2000 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray Njdpfx Asya H H Asmnswg - Voltage fluctuations +/-5% - Location: in stock

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2000 mm - Used - Feed speed adjustable via frequency converter Nsdpfx Amjya H H Nenewg - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock

Condition: as good as new (ex-display), Year of construction: 2024, Primary crusher Basic machine starting from € 29,950 net *Options against surcharge Ideal for pre-crushing bulky materials such as pallets, boards, beams, fruit crates, polystyrene, plastics and much more. For the production of wood chips, the primary crusher can also be installed directly above a single-shaft shredder Machine in pre-production * Special options available at extra cost Your advantages: + Volume reduction of up to 70 + Significantly lower transportation costs + Low disposal costs + Production of fuel material + Also ideal upstream of a single-shaft shredder for the production of wood chips Weight: 1,200 kg Dimensions 2050x850x1600 mm Nwodofd Icispfx Amnsg Cutting unit opening 1300x700 mm *Optionally also available in 1600x700 mm (motor then 11 kW) (surcharge + 4.995 € net) Throughput: up to 50 pallets/pieces per hour *depending on material Motor: 7.5 kW Options: Industrial top hopper (closed on 3 sides) + € 4,950 net Extra emergency / off button + 495 € net 200 mm extension + 497 € net Requirements for the raw material: - Moisture content less than 30 % ATRO - The machine must be installed in accordance with CE guidelines or secured on site against access from below (into the cutting unit) - Pallets up to a dimension of 1200x800 mm can be processed Longer parts also work on edge

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Nedpjyuld Aefx Amnswg Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence Nwjdpfx Ajw I Uinemnsg - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: used, functionality: fully functional, mileage: 87,500 km, power: 162 kW (220.26 HP), first registration: 05/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, Year of construction: 1998, Equipment: additional headlights, The LHF 16 fire engine was in service at a major airport. The condition is good and it is ready for operation. The equipment shown in the photos belongs to the vehicle and will be included. Nedpfxoy S Thfs Amnewg Water tank: 1230 liters Foam tank: 130 liters

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Nsdpfxsynky Ao Amnswg Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: ready for operation (used), Fanuc A06B-0218-B100 AC Servo Motor, serial number: C157F2B53 + Pulsecoder A860-2000-T301, used, in good condition, 100% functional, delivery as per photos. Nsdpsy Nn Twefx Amnowg

Condition: new, Heidenhain ROD 320.001 2000 rotary encoder. 244 644 08 serial number 3742184 – unused! – Nedpfoy Nqn Rox Amnswg