Used Millutensil Hydraulic Press Millutensil - Mil 163 for sale (31,035)

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m Itjdju Nfm Topfx Akpjn HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Isdpfx Akozzzi Hjpstn Technical Data: - Punching force: 700 kN - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm - Stroke adjustable in steps: 0 to 75 mm - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch - Center-finding device - Support table with stops and scales

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Itedpfxsv Rwu Ue Akpen Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW liter capacity 9,0 l dayligth 800 mm tank capacity 31 l daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Hand and Motor operated. Iodpjvu E T Hofx Akpjtn Side-sliding cylinder.

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 14400 € 276.48 € 70 to horizontal verschiebbar 350 mm 900 mm 1050 mm max. 9 mm/s 2 kW 1950 mm 1000 mm 2250 mm 1220 kg 650 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. Iedpfx Akoypbrxspjtn The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 9000 € 173.7 € 30 to fix 350 mm 920 mm 900 mm max. 9 mm/s 0,75 kW 1600 mm Iedpfxoypbuae Akpetn 700 mm 2050 mm 430 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. Iedpfx Aksxna Uzepjtn ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual Itodpexabnaefx Akpjn

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec Ijdpfoxaar Djx Akpstn return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm Itjdpsxaayhofx Akpon column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display Itjdpexaakgsfx Akpen - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec Itodpfxjyif Nrj Akpjn total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: ready for operation (used), functionality: fully functional, pressing force: 100 t, stroke length: 250 mm, table width: 600 mm, table length: 1,000 mm, ram plate length: 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 100 t Maximum stroke: 250 mm Press model: Workshop press Press design: Single-acting Table length: 1,000 mm Table width: 600 mm Iedpjzza Uhefx Akpotn Table bore diameter: 140 mm Ram length: 300 mm Ram width: 300 mm Height adjustment: 250 mm Column spacing, length: 2,000 mm MACHINE DETAILS Drive system: Conventional Transport packages: 3 pieces Transport weight: 8,000 kg

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge Itedpfxjz Hwhmj Akpjn The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. Ijdpjxabcwsfx Akpetn dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer Itodpepvk Dijfx Akpsn

Condition: new, Year of construction: 2024, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, installation height: 400 mm, Equipment: safety light barrier, EXNER hydraulic double column press EX SLL 40 new machines year of construction 2024 Ijdpfx Akjuv Hm Ispjtn pressing force: 400 kN Installation height: 400/450 mm stroke: 250 mm Table (width) 700 mm Table (depth) 450 mm

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press Itedpjuw S A Djfx Akpsn NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm mech. depth stop

Condition: used, Year of construction: 1990, pressure 150 t distance between table / ram 660 mm table surface area 1500 x 610 mm diameter of seal 150 mm range L-W-H 1,7 x 1,5 x 2,3 m C-frame press Isdpfjy Erv Iox Akpotn - hole in table Ø 120 mm

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. Itodpfx Akju Nfv Uepsn *

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Isdpfxjup Skws Akpotn Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: used, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Year of manufacture: 2009 Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 Itjdszdnzhspfx Akpen - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2002, condition: good (used), Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Itjdpfxsn Tnv Ej Akpjn Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: excellent (used), Year of construction: 2001, - 1 Schuler press - Capacity: 1000 tons - Stroke: 1,300 mm - Die cushion tonnage: 30 - 200 tons - Die cushion stroke: 200 mm - Daylight between press frames (Pmi): 800 mm - Work area: 2,500 x 2,100 mm - Movable tables for press: 2 - Approach speed: 600 mm - Working speed at 50%: 96 mm Itsdpfx Akjzy Uuyepen - Working speed at 100%: 46 mm

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 180 t, Pressure: 180 t Bending length: 3100 mm Frame width: 3100 mm Control: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid approach (down): 180 mm/s Bending speed: 0-10 mm/s Rapid return (up): 165 mm/s Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dimensions: 4255 x 2390 x 3030 mm Standard equipment: Itodpfx Akswz Et Sjpon - CNC control Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system mod. GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Additional equipment: - 2 x front support tables - 2 x stop fingers - Hydraulic upper tool clamping Wila Style - Hydraulic die clamping Wila Style - CE standard norm