Used Hamm Hd 10 K for sale (58,076)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Podpjzdn H Refx Al Nepu Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, mileage: 195,900 km, power: 79 kW (107.41 HP), first registration: 01/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 6,690 mm, total width: 2,210 mm, total height: 3,100 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, loading space length: 3,700 mm, loading space width: 2,140 mm, loading space height: 2,330 mm, Year of construction: 2021, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional options and accessories = - Automatic low beam headlights - Co-driver's seat - Co-driver's seat - Roof spoiler - Euro 6 emission standard - Driver airbag - Remote central locking - Cruise control - Wooden slat interior lining - Wireless charging function for mobile phones - LED daytime running lights - Front center armrest - Rain sensor - Rearview camera - Side door - Immobilizer - Advertising (applied) - Partition = Additional information = General information Cab: standard License plate: VHT-17-B Technical information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: RENAULT, 6 gears, manual transmission Front axle: Max. axle load: 1850 kg; steered Maximum rear axle load: 2100 kg Weights Unladen weight: 2,597 kg Ppjdpfoy Tamqex Al Neu Payload: 903 kg GVW: 3,500 kg Functional Tail lift: D'HOLLANDIA, tailgate, 1000 kg Maintenance APK (technical inspection): valid until 07.2027

Condition: used, empty load weight: 3,180 kg, maximum load weight: 6,820 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2011, loading space length: 5,070 mm, loading space width: 2,420 mm, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 3-sided tipper, 500 mm drop sides, 4 x 3 t lashing eyes, loading height approx. 950 mm, , Surcharge for aluminum ramps, Price: 600 Euro, , Vehicle is sold on behalf of the customer , , -- Misprints, errors and modifications excepted, sample pictures --, More data under: !, More Details: ! Pedpfx Alszhr I Tj Nopu

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2020, loading space length: 13,490 mm, loading space width: 2,480 mm, loading space height: 2,640 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,730 mm, color: red, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.791 kg Carrying capacity: 26.209 kg GVW: 33.000 kg Functional Make of bodywork: Schmitz Ferroplast Maintenance, history and condition Ppodpfx Aljzf Uu Rj Nju Number of owners: 3 APK (MOT): tested until 10/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, axle configuration: 1 axle, first registration: 04/1996, loading space length: 11,000 mm, loading space width: 2,500 mm, loading space height: 2,680 mm, total length: 11,500 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, wheelbase: 7,200 mm, color: other, Year of construction: 1996, Equipment: tail-lift, = Additional options and accessories = - Tail lift Ppedpfxezcagho Al Nsu = Notes = Number of axles: 1, Dual tires, Payload: 10300 kg, Tare weight: 9700 kg, Gross weight: 20000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, Body year of manufacture: 1996, Axle type: BPW, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift material: Steel, Tail lift size: 175x255, SELLING TRAILER MARKTKRAAM = Further information = General information Cab: Day cab Registration number: OD-53-XB Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 275/70R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Dual tires; Steered; Tire tread depth left inner: 11 mm; Tire tread depth left outer: 11 mm; Tire tread depth right inner: 13 mm; Tire tread depth right outer: 9 mm Weights Tare weight: 9,700 kg Payload: 10,300 kg GVWR: 20,000 kg Functional Tail lift: Rear door, 1500 kg Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands in various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and submit an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2020, condition: new, Exhibition machine Ppodpfxsxg Ux Ej Al Nju with AD 2000 Year of construction 2020 Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Number of compression stages 2 PU 1 Dimensions and weights Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Weight approx. 160 kg Electrical data Output power 4 kW Supply voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance Ppjdpfswka S Iex Al Neu - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: currently still in production Features and technical specifications: Edgebanding max. 8-55 mm Incl. swiveling control panel HF jointing unit with 2 motors Incl. quick-heating, exchangeable, Teflon-coated glue pot Pjdpfx Aew Nadgsl Nopu Incl. electronic positioning of pressure rollers Incl. tilting double end-trim saw unit Incl. flush milling unit Incl. application-controlled chamfer, radius, and corner copying unit with nesting package Incl. radius scraper with nesting package Incl. surface scraper Incl. grooving unit Incl. buffing unit Incl. spraying unit Availability: short-term Location: Flörsheim

Condition: used, mileage: 155,050 km, power: 120 kW (163.15 HP), first registration: 12/2011, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 5,910 mm, total width: 1,993 mm, total height: 2,530 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Internal vehicle number: 9520 ----Why autonext GmbH? One of the largest commercial vehicle dealerships in Germany. Always over 400 vehicles immediately available. Largest selection – best price. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, only serviced at Mercedes Benz Next service due in 38,700 km New front and rear brakes New all-weather tires on the front High-pressure cleaner Manufacturer: Rockstroh Fahrzeugbau GmbH Trailer hitch Rear view camera Air conditioning (Tempmatik) Auxiliary heater Exterior lighting Podpfxozhbgrs Al Nopu Comfort suspension seat Reinforced stabilizer bar, front and rear Rotating beacon lights (2) ---- Special equipment: * Windows for rear doors in black tinted glass * Heated rear window * Airbag on passenger side * Hill start assist * Trailer socket 13-pin * Audio system Audio 20 (radio with CD player) * Outside temperature display * Battery 100 Ah * Additional battery (reinforced) * Mounting rails for roof rack * Ceiling light in the cargo area with door contact switch * Windows for rear doors * Window in the cargo/passenger compartment: - fixed, front right * Generator 180 A * Gearbox lock for auxiliary drive * Additional main key * Rear door (opening angle 270 degrees) * Wooden floor in the cargo area * Air conditioning (Tempmatik) * Fuel tank: main tank 100 liters * Cargo area partition with sliding window * Steering wheel with multi-function buttons including trip computer * Auxiliary drive 2 B with output shaft * Parameterizable special module * Spare wheel in driving condition * Spare wheel carrier under the end of the frame including jack * Rotating beacon lights (2) * Interior rearview mirror * Rear mud flaps * Front mud flaps * Seats in the cab: Double passenger seat * Seats in the cab: Comfort suspension seat, driver's side * Reinforced stabilizer bar, rear * Reinforced stabilizer bar, front * Reinforced shock absorbers * Fuel level sensor for auxiliary heater * Separation relay with additional battery * Paneling in the cargo/passenger compartment: hard fiber * Preparation for mobile phone/hands-free system * Reinforced front axle * Preparation for tachograph * Auxiliary heater (hot water) * Intermediate restriction for cargo area sliding door Standard equipment: 3rd brake light, Adaptive brake light, Airbag on driver side, Anti-lock braking system (ABS), Drive type: rear-wheel drive, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assistant, Braking system with ABS+ASR, Headliner in the cab, Electronic stability program (ESP), Power windows, electric 2-fold, Gearbox 6-speed - TSG (Eco Gear), Glove compartment lockable, Body/superstructure: standard van, Child safety lock, Cargo securing / lashing points, Headlight range adjustment, Engine 2.1 liters - 120 kW CDI CAT, Particle filter, Wheelbase 3665 mm, Non-smoker package, Low emissions according to Euro 5 emissions standard, Sliding door cargo/passenger compartment right, Power steering, Seat cover/upholstery: fabric Lima, Seats in the cab: passenger seat with armrest, Seats in the cab: driver's seat with armrest, Service interval display Assyst, Immobilizer, Heat-insulating glazing, Central locking

Condition: used, Year of construction: 2008, - Brand: JLG - Type : 260 MRT - Year of construction: 2008 - Weight : 3756 kg. - Hours: 2527 hours - Working height: 10 meters - Lifting capacity: 570 kg. - Automatic stamping - Drive: Diesel - Kubota - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: JLG Ppsdpfx Aljzgh D Ij Neu * Working height: 10 meters *Type: 260 MRT * Construction year: 2008 * Weight: 3756 kg. * Hours: 2527 uur * Lifting capacity: 570 kg. * Drive: Diesel - Kubota * Long: 267 cm. * Width: 175 cm. * High: 237 cm. CE document: Yes Video on website: Yes Aerial work platform book: Yes

Condition: good (used), mileage: 201,781 km, power: 125 kW (169.95 HP), first registration: 08/2012, fuel type: diesel, wheelbase: 3,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,600 kg, Year of construction: 2012, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - 100% dealer-maintained - Alarm system - Armrest - Audio controls on the steering wheel - Exterior mirrors with integrated turn signals - AUX input - Outside temperature display - Becker (navigation system) mount - Co-driver's bench seat - Differential lock Podpfxjzfw Dbs Al Nepu - Tachometer - Third brake light - Driver's seat height adjustment - Remote central locking - Tinted glass - Dealer-maintained - Height-adjustable steering wheel - Folding exterior mirrors - Multifunction steering wheel - Particle filter - Disc brakes - Headlight height adjustment - Immobilizer - Tachograph - Partition with window = Additional Information = General Information Number of doors: 2 Cab: single cab Technical Information Number of cylinders: 4 Engine displacement: 2,998 cc Maximum front axle load: 1,900 kg Maximum rear axle load: 2,600 kg Weights Unladen weight: 1,970 kg Payload: 1,530 kg GVW: 3,500 kg Maintenance, History and Condition APK (technical inspection): valid until 09/2026 Technical condition: good Optical condition: good Product Safety EU responsible: Nico Drost Molenstraat 4 Lienden 4033AV Lienden, GLD, NL = Company Information = Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van or truck. The indicated price is the 'internet take-away price'. For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: new, Internal reference number for inquiries: 2 - 50 AVAILABLE IMMEDIATELY! Ppedeyluurjpfx Al Neu New to the market, the HC 10 1T mini excavator / crawler excavator at a special price. Available with bucket and hydraulic hammer. HT10 1T Mini Excavator * Technical specifications: * Weight 1000 kg * Bucket capacity 0.025 cbm/120 kg * Bucket width 380 mm * Engine CHANGCHAI (192FAM) Diesel * Bore stroke Single-cylinder, fan-cooled, rated power 8.2 kW/3600 rpm * Main pump G5-6 * Displacement 6.8 ml/r * Swing motor SANYANG (BMRS-250) * Travel motor SANYANG (BMT-245) * Travel speed 1.5 km/h * Overall dimensions (L x W x H) 2775 x 930 x 2219 mm * Wheelbase 910 mm * Overall length 1230 mm * Platform ground clearance 380 mm * Platform rear turning radius 784 mm * Undercarriage width 896 mm * Track gauge 180 mm * Undercarriage ground clearance 132 mm * Track height 320 mm * Working range max. digging depth 1650 mm max. vertical digging depth 1375 mm max. digging height 2610 mm max. * Dump height 1850 mm max. * Digging radius at ground level 2850 mm * Min. turning radius 1330 mm max. * Dozer blade lifting height 345 mm max. * Dozer blade digging depth 255 mm * Includes hydraulic hammer!!! For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Intended use: Construction Drive type: Tracked General condition: very good Technical condition: very good Optical condition: very good

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2024, total length: 11,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,270 mm, color: other, Year of construction: 2024, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Ppjdpfxszfh S Ne Al Nju Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 5.160 kg Carrying capacity: 35.840 kg GVW: 41.000 kg Maintenance APK (MOT): tested until 10/2026 Identification Registration number: OV-38-KH

Year of construction: 1994, condition: ready for operation (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 13 bar increased test pressure : 23,4 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1994 1 pipe set blind equipped with Weishaupt oil burner, switch cabinet, feed water pump, Pjdelx Azyjpfx Al Nepu eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings

Year of construction: 1994, condition: excellent (used), 1 used steam boiler ----- manufacturer : Jumey heating surface approx. : 40 qm capacity max : 2.000 kg/h max. allow. working pressure : 10 bar so far operated with : 5,0 bar Ppsdpfx Asikvdiol Neu water contents low level approx. : 3.540 l water contents full approx. : 4.750 l year of construction : 1994 equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, feed water pump and the existing fine and coarse fittings.

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump Pjdpsi E Hztjfx Al Njpu and the existing fine and coarse fittings.

Condition: excellent (used), lifting height: 5,500 mm, Year of construction: 2022, operating hours: 390 h, Weights Empty weight: 1.403 kg Functional Lifting capacity: 1.000 kg Dimensions of cargo space: 270 x 95 x 190 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Ppedpfevkd Uuox Al Nsu Hook height luffed jib: 425 cm Delivery terms: EXW Latest inspection: 2024-07-15 Production country: IT Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Jekko MPK10V * 2022 * Battery * 390 working hours * 4.25 meter hook height * 5.5 meter vacuum height * Remote control * 1403 kg own weight * 990 kg lifting capacity * Inspection until July 2025 * including documents

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Ppjdpfxew Hc Sps Al Nju Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: used, Used LED industrial light from Planistar Lichttechnik GmbH. Robust industrial housing with integrated LED technology and reflector insert. Ideal for industrial lighting applications. Manufacturer: Planistar Lichttechnik GmbH Model: 10-10-Xled-3-KX-46W-POL-Daimler Device Type: LED industrial light Condition: used Available quantity: 16 units Light color: White Supply voltage: 24 V DC Power consumption: 46 W Operating mode: Continuous light or flashing mode Current consumption (continuous light): 1 A Current consumption (flashing mode): 1.5 A Protection rating: IP40 Pin assignment: Pin 1 Brown: 24 V DC Pin 3 Blue: GND Pin 4 Black: Signal 5–24 V DC (continuous light) Pin 2 White: Signal 5–24 V DC (flashing mode) Manufacturer part number: 20192171 Ppodpezdngqofx Al Nou Quantity: 16 units available

Condition: used, - Dimensions: 1620x1840x2600 mm - Trolley dimensions: 800x1000 mm - Model: LR-108-HD - Serial number: 4130606 - Minimum 180 baguettes - Baking surface: 16 m² - Voltage: 400 V - Power: 3.5 kW - Baguette capacity: minimum 180 - Burner position: Top - Year: 2005 Ppedowxmwajpfx Al Nju - Sold with gas burner

Condition: new, empty load weight: 3,650 kg, maximum load weight: 6,350 kg, overall weight: 10,000 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 37 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL 1500 tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 6 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Podpfx Aljzgc Dpe Njpu

Condition: used, Year of construction: 1981, -1- used impact crusher for hard rock, inlet approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, feed size up to 180 mm, final grain size 0/35 mm. Pjdpfx Alew N Hk Hs Nspu

Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 02/2012, total length: 10,850 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, General information Model year: 2026 Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25% Weights Empty weight: 6.080 kg Carrying capacity: 18.920 kg GVW: 25.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Podpfxozdycqs Al Nspu Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 01/2012, loading space length: 10,610 mm, loading space width: 2,510 mm, loading space height: 2,610 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: BPW EcoPlus Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.960 kg Ppsdpfxszdycks Al Nju Carrying capacity: 18.040 kg GVW: 25.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Year of construction: 2025, condition: new, Boiler capacity: 270 l Podpfx Alohhcxzj Njpu Volume flow rate: 520 l/min Motor power: 4 kW Refrigerant dryer: Yes