Steam boiler

Jumey 2.000 kg/h x 10 bar

Condition: good (used), 800 / 2700. Serviced and inspected. Folding machine included. Gbedpfx Astphi Hefnjh

Year of construction: 2003, condition: good (used), Weishaupt gas burner Monarch Gbjdpfxsmdpcze Afneh Burner type G7/1-D Version ZMD Power 300 - 1750 KW Including gas line ( gas fitting ) Burner was recently in operation

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Gbedpfx Aoiuznuofnsh Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: not inspected (used), Lubot & Wakker Type: 1 pallet vacuum chamber Capacity: up to 2.000 Kg (6-8 charges) hr Completely stainless steel Dimensions chamber: L x W x H = 2.200 x 1.700 x 3.400 Weight: 1200Kg Electric: 380V 3P+N+E, 7,25Kw Compressed air: 6 bar Drinking water: 3 bar aprox. 1250 ltr/hr Features: Controll cabinet Gbjdpjfxyqrofx Afnsh vacuümpump mix-tank water preparation Storage tank with pump valves etc as-is or tested and adjusted to customer choice

Condition: excellent (used), Year of construction: 1996, pressure: 13 bar, operating pressure: 13 bar, 1 used steam boiler ----- Make: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 53 m² Output: 3,200 kg/h Max. operating pressure: 13.00 bar Increased test pressure: 24.05 bar Water capacity at low water level approx.: 2,650 l Water capacity when full approx.: 3,770 l Year of construction: 1996 Equipped with a Weishaupt gas/oil combi burner, gas control system, control cabinet mounted on the boiler body, feedwater pump, Gbodpfx Ajv I Rpaefnoh and the existing coarse and fine valves.

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. Gedpfxsrvh Tme Afnebh We can also offer full electrical installation and assembly of line on site.

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Gbedpfx Afjd H Sc Esneh Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Godpsu R R Avefx Afnsbh Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l Gbodpfx Afonp Hwkonoh with switch cabinet, sampling water cooler, 2 dosing vessels

Year of construction: 2018, condition: excellent (used), bestehend aus zwei Stück Zahnriemenachsen EGC-80-1300-BS-10P-KF-0H-ML-GK und vier Stück Linearführungsschienen HGR 20C 1705V9-10A00 mit HIWIM Linearblock HGW CCC 170 3W3-10200 Gjdpfxjg Ixume Afnebh Zwei Unimotore 075E3C300BACAA075140 mit Zwei EMERSON UNIDRIVE M 701-3200050A