Used Fuji Alpha Vii for sale (390)

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 40 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7 W, Equipment: documentation/manual, Year of manufacture: 2000 Turning length: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 210 mm Distance between centres: 1000 mm Control type: FANUC Spindle nose: Camlock D1-4 Spindle bore: 40 mm Max. spindle speed: 3,500 rpm Spindle motor power: 7.5 kW Dimensions (L x W x H): 2100.0 × 1200.0 × 1600.0 mm Ledoxd Aigjpfx Ampoaa Weight: 1200 kg

Year of construction: 2010, condition: ready for operation (used), Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Lajdpeu N Hdajfx Ampsa

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Lasdpjua E Txefx Ampea

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Laodpfx Aov Ip R Aompea

Year of construction: 2021, condition: ready for operation (used), Two identical Hyfra refrigeration units are available. Cooling capacity: 25kW, refrigerant: R410A, refrigerant charge: 4kg, max. operating pressure: 42bar, medium: water, pumps process/standard: 2/2, pump type: CM3-4/CM5-5. Machine dimensions X/Y/Z: approx. 1650mm/750mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Ljdpfx Amexr Nwmspoaa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, shaft diameter: 100 mm, bending force (max.): 28 t, stroke length: 200 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Capacity: 90 mm Shaft diameter: 100 mm Usable shaft length: 280 mm Roller speed: 4.6 rpm Bending force: 280 kN Stroke: 200 mm MACHINE DETAILS Control: Conventional Motor power: 12.5 kW Dimensions (L x W x H): 1,600 mm x 1,600 mm x 1,800 mm Weight: 2,800 kg EQUIPMENT Laodpoxmgw Tefx Ampsa CE marking Documentation

Condition: excellent (used), Year of construction: 2017, Manufacturer Fanuc Model Robocut ∝-C 600iB Year 2017 Condition Used Maximum weight of the part 1000 kg X 600 mm Laodpfx Amex Avh Hjpoa Y 400 mm Z 310 mm Z (optional) 410 mm U ±100 mm V ±100 mm Maximum tapered cutting angle ±30° in 150 mm Wire diameter 0.10 to 0.30 mm CNC System FANUC Series 31i-WB Machine dimensions (W x D x H) 2440 x 2430 x 2160 mm Machine weight 3000 kg

Condition: used, functionality: fully functional, machine/vehicle number: HR11566, Year of construction: 2008, operating hours: 2,314 h, load capacity: 30,000 kg, lifting height: 1,800 mm, free lift: 1,800 mm, fuel type: diesel, mast type: simplex, construction height: 3,400 mm, power: 180 kW (244.73 HP), fork length: 2,000 mm, empty load weight: 36,100 kg, total length: 4,850 mm, drive type: Diesel, construction width: 2,725 mm, Compact forklift - diesel Chassis number: HR11566 Load center: 1000 Fork width: 300 mm Fork thickness: 100 mm Mast type: Mono Gearbox: Hydrostatic Condition: Ready for use and fully functional Technical condition: good Front tires type: bandages Front tires condition: 80 - 100% Laodpfxjx Rr Etj Ampja Rear tires type: bandages Rear tires condition: 80 - 100% Description: Further data on request Side shift, fork positioner, 760 mm to 2,150 mm (Ak - Ak forks). 3rd valve, 4th valve, rear work lights, front work lights, heating, soot filter, full cabin, full free lift, CE certificate, twin tires, exterior mirror, rotating beacon, windscreen wiper, seat, HUSS particle filter, type FS 100 MKL with internal regeneration via burner. Camera front & rear

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: Alpha 2-4 LD-2, battery voltage: 230 V, Used Martin Christ Alpha 2-4 LD-2 plus freeze dryer with Vacuubrand chemistry pump Type: Alpha 2-4 LD-2 plus (101542) | Vacuubrand RC 6 Laodpewm Eaijfx Ampja Manufacturers: Thermo Fisher Scientific (Martin Christ) | Vacuubrand GMBH Voltage: 230 (50hz) Including documentation and manual

Year of construction: 2022, condition: used, Operational condition! Lasdpfsyi Uwuex Ampsa Ask for specification and quotation!

Condition: ready for operation (used), Ebelt ALPHA 140 control panel, used, normal signs of wear, 100% functional, scope of delivery according to photos Lajdpsi D Uqpofx Ampoa

Condition: new, Year of construction: 2025, 0554 mm Lodewp Tgcopfx Ampsaa 2000 mm 277 mm 104 mm 400 mm 2000 U/min D1-11 DIN 55029 95 mm 145 mm

Condition: good (used), ISEL SM Alpha Omega – 5-Axis CNC Machining Center with Double Spindle, Year of Manufacture: 05/2015. The machine is equipped with two high-performance high-frequency spindles, making it ideal for demanding applications in medical technology, precision engineering, micro-machining, and mold and prototype manufacturing. Technical Specifications: • Model: ISEL SM Alpha Omega • Year of manufacture: 05/2015 • Article number: 274507 SSZ6000 • Axes: 5 (X, Y, Z, A, B) Travel distances: • X-axis: 1800 mm • Y-axis: 1700 mm • Z-axis: 800 mm Spindles: • Quantity: 2 high-frequency spindles • Speed: up to 60,000 rpm • Power: up to 6 kW • Tool holding: HSK25 / HSK32 Machine dimensions: approx. 2800 x 2550 x 2950 mm Weight: approx. 1400 kg — • Linear motors in X and Y axes • Rotary/swivel fork head The machine is in well-maintained, regularly serviced condition and is ready for immediate operation. Inspection is possible by arrangement at any time. Including extraction unit. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 Laodpfxoxiy Uds Ampoa All prices plus VAT. Subject to change and errors excepted.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB Control Travel paths: Lajdpfowl Hiisx Ampoa X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, Max. workpiece weight 500 kg, Machine weight 1,700 kg, Power supply 13 kVA The machine can be inspected while powered.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück Laodpfxeu Icnfj Ampea back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Year of construction: 2012, condition: ready for operation (used), There are eight identical label dispense available, speed: 0-80m/min, output: 1000 label/ min, length: 700mm, width: 320mm, height: 500mm, including accessories. Laodpfxsflmc Nj Ampsa

Condition: used, Year of construction: 2003, punching pressure 16 t plate thickness 8 mm plate length max. 1250 mm sheet width - max. 1000 mm engine output 13 kW control Cadman CNC voltage 400 V weight of the machine ca. 8,3 t Ljdpfx Ajd Ih Spempoaa dimensions of the machine ca. 3600 x 2300 x 2000 m

Condition: good (used), Year of construction: 2009, functionality: fully functional, Good condition. Lasdpfx Amsxbpliopoa

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Lasdjyfl U Nepfx Ampsa

Condition: ready for operation (used), Year of construction: 2008, Year of manufacture: 2008 Ljdpfx Amsv Tpanjpsaa Control system: Fanuc Maximum length of the turning: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Maximum rotary speed of the spindle: 3500 1/min Length: 2400 mm Width: 1700 mm Height: 1500 mm Weight: 1800 kg Accessories/options: 3-jaws chuck lots of jaws collet type chuck collets steady faceplate Parat type tool holders Under power in our warehouse.

Condition: good (used), Nearly all SCREEN, FUJI, AGFA, HEIDELBERG CTP Spareparts second hand, tested or new Lsdpfx Asdpxbgsmpeaa All offers are subject to prior sale

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: MGL203279932, turning diameter: 32 mm, Equipment: bar feeder, documentation/manual, The machine has only been operated in single-shift use! TECHNICAL DETAILS Max. machining diameter: 32 mm Spindles Main spindle: with collet chuck Sub spindle: with collet chuck and air blast device MACHINE DETAILS Operating hours: estimated approx. 25,000 - 30,000 h EQUIPMENT Bar feeder FMB Turbo 5-42/3200C Documentation High-pressure coolant pump Workpiece removal unit Various collets Lajdpfxsxrcpve Ampea Central lubrication system Ejector for workpieces with through-hole

Condition: used, Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur Gearbox Type: 1FT6064-1AF71-3EG1 Serial No.: YF P921 8717 07 001 Year of manufacture: 2002 Rated torque = MO: 7.9/9.5 Nm Rated current = Io: 5.0/6.1 A Max speed = n. max.: 4550 rpm ALPHA Angular Gearbox Type: PKF 160-MF2-18-031-000 Lajdpfx Amsxciw Uspea Article code: 20026113 Gear ratio 18:1 (Gearbox input = 18 revolutions, gearbox output = 1 revolution) Hollow shaft outer diameter 68 mm Hollow shaft inner diameter 55 mm Shaft stub length 50 mm Centering diameter 140 mm Housing dimensions L/W/H 650 x 160 x 195 mm Weight: approx. 50 kg Good condition Removed from a fully functional custom machine, tested prior to removal.

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Laodpsul Uwlsfx Ampea Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: like new (used), Year of construction: 2017, operating hours: 3,800 h, functionality: fully functional, Controller FANUC 31i Model B5 Table size 850 x 410 mm Max. table load 300 kgs X travel 700 mm Y travel 400 mm Z travel 330 mm A axis C axis 0 - 360 degree Distance between table surface and spindle end 250 - 580 mm Max. tool length 250 mm Max. tool diameter D80 mm Max spindle speed 24000 rpm Rapid speed X/Y/Z 54 m/min Feedrate 30 m/min ATC magazin 21-fold Tool holder type BBT30 Weight 2300 kgs Accessories, featureies - 4/5 axis with round table - RENISHAW TS27 tool presetter system - RENISHAW OMP60 zero point setting system - Chip conveyor - Coolant unit - Manuals Ljdpoxtwxhjfx Ampeaa The machine has been used little and the condition is like new. Ready to buy.