Used Fan, Turbine Wtk 50 for sale (36,719)

Condition: ready for operation (used), Fanuc A06B-0502-B272 20S AC servo motor SN: C939A3350, used, in good condition, 100% functional, delivery scope as per photos. Hedpfx Aey Npbisicjfk

Condition: ready for operation (used), Fanuc A06B-6150-H075 amplifier B-65282 SN: V11105021, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Hfodpfey Np Szox Aicok

Condition: ready for operation (used), Fanuc A20B A350-0007-T362/03 module, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdpfoy Np Tlox Aicefk

Condition: ready for operation (used), Fanuc A20B A350-0008-T372/ circuit board, used, in good condition, 100% functional, delivery as per photos Hfsdpfjy Np Trox Aicek

Condition: ready for operation (used), Fanuc A20BD / A350-0008-T414/04 circuit board, used, in good condition, 100% functional, scope of delivery as per photos. Hjdpfey Rcldex Aicsfk

Condition: new, Fanuc A06B-6058-H229 / 24xes Digital Servo Amplifier, serial number: 15000182, unused in opened original packaging, 100% functional, delivery as per photos. Hsdjx Eq Tfspfx Aicsfk

Condition: ready for operation (used), Fanuc A20B-1000-0850 / 09B board, SN:128021, used, minor signs of wear, 100% fully functional, scope of delivery as shown in photos. Hedpjx Erh Djfx Aicofk

Condition: ready for operation (used), Fanuc A06B-0502-B10#7000 SN: C974M0094 servomotor, used, normal signs of wear, 100% fully functional, delivery as per photos. Hodpfxjx Dt Nws Aicefk

Condition: new, Fanuc A06B-2045-B100 AC servo motor SN: C178C06BE with A860-2050-T321 pulsecoder, unused, 100% functional, scope of delivery as per photos Hfodpjx Dt S Esfx Aicjk

Condition: new, Fanuc A06B-6290-H322 Servo Amplifier Version: C SN: V22500099, unused, 100% functional, scope of delivery as shown in the photos. Hjdpfx Aex Dwpueicsfk

Condition: ready for operation (used), Fanuc 0550544 Reduction gear for Robot R-2000iA 125L - Diameter: 340mm, used, normal signs of use, 100% functional, scope of delivery as per photos Hsdpfx Aior Nqr Decofk

Condition: new, Fanuc A06B-6050-H104 Velocity Control Unit, unused, 100% functional. Hfsdpfoi D Uwgjx Aicsk

Condition: like new (used), Year of construction: 2007, operating hours: 690 h, functionality: fully functional, machine/vehicle number: F-87459, input voltage: 400 V, type of input current: three-phase, This robot is a 'lazy dog'. Despite its age, it has just 70 hours of operating time. It served as a test robot and was not actually used in production. Nevertheless, it has received regular maintenance from Fanuc. Its condition is almost as new. It can be mounted on the floor, wall, or ceiling. The machine has been inspected and has undergone a trial run. If interested, the robot can be viewed at our facility. Delivery and initial commissioning are also possible. Hsdpow Tl S Djfx Aicsfk

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00567, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/250F manufactured in 2011.07. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/250F Model Number: A05B-1329-B215 Year of Manufacture Robot: 2011.07 Warranty term (months): 12   Payload (kg): 250 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1270   Controller: R-30iA B-Size Hfodpfx Aiey Uavuscok Year of Manufacture Cabinet: 2011.07 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 8,500 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, total length: 9,530 mm, Equipment: finger protection, The machine was overhauled in 2021! TECHNICAL DETAILS Cutting width: 8,500 mm Cutting thickness: 8 mm Rear stop: 1,000 mm Hfodpfx Aoyuaiasicsk MACHINE DETAILS Control: Conventional Motor power: 15 kW Dimensions & Weight Dimensions (L x W x H): 9,530 x 2,750 x 2,950 mm Machine weight: 55,000 kg EQUIPMENT Electric backgauge Finger guard: Fixed Angle adjustment: Motorized Cutting gap adjustment: Motorized Documentation CE marking

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00456, load capacity: 350 kg, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/350 manufactured in 2012.02. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2012.02 Warranty term (months): 12   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.02 RCC Length (m): 14 Hsdpfoxfa Aaex Aicofk   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00486, load capacity: 350 kg, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/350 manufactured in 2012.02. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2012.02 Warranty term (months): 12   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.02 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Hfedpfx Aiexpygtocjk Teach Pendant Cable Length (m): 10  

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t working width: 4300 mm clear support width: 3600 mm support throat: 300 mm max. assembly height: ca. 500/700 mm Hfedpfxj Dnf Uj Aicek working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. Hfjdpetu Hpqjfx Aicjk We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. Hfedpfx Astu H Avsicsk However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. We would also bring the device to us from Frankfurt. Hedpstu H Hcjfx Aicjfk

Condition: refurbished (used), Year of construction: 2008, The wrist is new and has never been assembled. It was as a spare part for a paint shop with Fanuc robots. The new price at Fanuc is €18,000.00. Hfjdpfxeihb Axo Aicsk

Condition: used, Year of construction: 1986, - incl. various bending tools - year of manufacture: 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Throat depth: 250 mm Hjdexdc A Hepfx Aicsfk - Passage: 2050 mm - Stroke: 140 mm - Stopping time: 140 ms - Backgauge travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Hfodpfsx D Rq Eox Aicjk

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressing force: 35 t, operating speed: 10 mm/s, table width: 60 mm, total height: 2,510 mm, overall weight: 3,250 kg, travel distance Y-axis: 590 mm, working width: 1,250 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 1,000 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, working length: 1,250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Hedpfev Eam Njx Aicefk Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability