Used Biesse Automatic Electronic Drilling Line Cnc for sale (38,437)

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm Pedpfx Ahohzbipjlopt - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm Ppedpjwcldaofx Ahlst max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale: SCHTEC WM740 four-head automatic welding machine, rarely used and in like-new condition, including WM620 corner cleaning automaton, cooling station, and automatic turning arm. If purchased together with the SMC350 machining center and Pressta two-head automatic screwing unit, which are also listed in your advertisements, the package price is EUR 180,000. Podpfx Aheyzimcoljpt For further information, please feel free to contact me.

Year of construction: 2021, condition: used, Lumacon automatic crate filling line Automatically feeding of 4 crates/ boxes per cycle. When the weight has been reached the conveyor belts will remove the filled crates and prepare 4 empty crates for filling. Ppjdpfx Aev E Irgjhlet - Complete with inclined conveyor belts - Buffer belts - Weighing belts - Multiple lines available from stock (Emmeloord)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder perfect binder with PUR with remote diagnostics with cooling and drying section with three-knife trimmer - System DGR D09 with compressor Base machine for standalone or inline operation for linking with a three-knife trimmer Equipment: - rotary cover feeder with integrated vacuum technology Winjector R - creasing station with split creasing tools for two and four grooves - cover alignment and pressing station incl. 1 set of standard press bars - lifting unit with gripper system for lightweight products - stack delivery (upright delivery) - industrial PC with TFT color display and touch-screen functionality - graphical user interface Navigator E - motorized thickness adjustment * Mobile PUR spine gluing unit – Europe for the production of perfect bound brochures with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR drum melter * Cooling and drying section * Hotmelt side gluing unit mounted on the spine gluing unit * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of perfect bound products in offline or inline operation -Offline or inline operation possible Podpfeimqucjx Ahlept * Compressor unit 1800 dm³/min.

Condition: used, Manufacturer : Indosa Origin : Suisse Year: 1990 (completely upgraded in 2006 with Siemens PLC)   Main machine: Indosa Matic 100 automatic seamer Filling / dosing: AW7/500 module Vacuum / dust collector: CK-V09 system Accumulation table: ZT800 Transport: 12-station star wheel Product feed: pneumatic transfer   Machine type: Automatic filling and sealing line for cans Box type: metal or composite Applications : Dry and granular products Examples: Tobacco, powder, granules, dry foods, solid products   Capacity: up to 40-50 units/min (integrated speed control) Can diameter Ø 80 mm standard (other sizes available on request) Box heights from 20 to 320 mm Pjdsx R Dypjpfx Ahljpt Dosing type : Weight (vibrator + bucket) Product supply : Pneumatic transfer Metal cover seaming, integrated seaming module Vacuum Integrated dust collection module CK-V09 Lid storage feeder : Yes Automatic control   Documents available in digital format.   Status / Additional information: video available in operation

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz Psdpfxou Tln Nj Ahlspt - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation Psdpfx Ahjfu Iwmelept It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Ppodpofu Swxjfx Ahljt Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Pjdpjfu Itbefx Ahlept Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Ppjdofu Ivzjpfx Ahljt Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Ppodpekqz H Dofx Ahlst

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 780 mm, 1 used, very well-maintained High-precision CNC jig boring machine SIP MP 600 Machine year: 1995 – Retrofit in 2007 with HEIDENHAIN iTNC 530 and complete geometric overhaul. Table: 1100 x 700 mm – clear passage between columns: 750 mm Hydrostatic spindle diameter: 130 mm – 1/1,100 micron runout Retrofit to HEIDENHAIN CNC, 3-axis interpolation. Readout accuracy of the boring spindle under 1 micron – hydraulic weight and load compensation in the crossbeam. Fantastically preserved machine, which we are happy to demonstrate under power at our warehouse. Price (Domestic, plus 19% VAT) ex stock Delivery time: immediate – subject to prior sale and errors. Payment: as customary in trade, net in advance before collection. Ppodpju Titzofx Ahlet Technical data non-binding – subject to change and errors.

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Ppsdpfoxr Dlxjx Ahlst

Condition: good (used), Year of construction: 2000, Drilling unit SUHNER Mono master Type: BEM12 ST25 1040, year 2000, equipped with Siemens motor. Psdoxr Dk Uspfx Ahljpt

Year of construction: 2005, condition: good (used), Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages. YOC: 2005 Type of strapping: single, double strapping max speed for single strap: up to 35 bundles/min max speed for parallel (double) strap: up to 17 bundles/min max bundle dimensions (w x l): ~500 x 600 mm min bundle (package) height: ~10 mm max bundle (package) height: ~400 mm max weight bundle/package: ~25 kg Infeed / outfeed (conveying) height: ~850 mm Continuously adjustable conveyor speed Pedjh I Dimspfx Ahlept Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: PP No of strap coil dispenser: single Strap coil dispenser - core diameter: 200 mm Strap coil dispenser - core width: 190 mm Equipment: - back stop (package stop) - hold-down device - auto. height detection - interface to up-/downstream equipment - auto. strap feeding - auto. strap end detection - auto. strap loop ejection (on "no bundle cycle") Over all length equipment: ~760 mm Over all width equipment: ~1540 mm Over all height equipment: ~1600 mm Input Power: ~2 kVA Voltage: 400 V 3Ph, 50/60 Hz Air requirement: ~8l/cycle; 6 bar Weight: ~415 kg

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm Psdpfx Ajh Iy Skehlept - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm Ppodpfx Aeh Iy Rujhlet - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: new, Year of construction: 2026, Y axis drilling: 920 mm Y axis sawing: 860 mm X axis: 3000 mm Z axis: 12 mm - 40 mm Pedpfx Ael D Rw Eshlopt A axis: 360 ° min. Dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm min. Hole diameter: 3 mm max. hole diameter: 35 mm motor power: 1,3 kW weight: 500 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- Ppodpfowqg Iiex Ahlst 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 5. Bottom routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm Ppodpfx Ahew Ugpyslet 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Condition: used, Automatic frying line HOJA DRL1000 Ppedpfx Ahjxay I Seljt Technical specifications: - Frying time: 40–345 sec, - Maximum frying temperature: 240°C / 460°F, - Machine dimensions (L × W × H): 2000 × 2600 × 2200 mm, - Total weight: approx. 750 kg, - Outer pan diameter: approx. 1 m, - Usable frying width: approx. 285 mm (11.22″), - Shallow frying with oil level up to 5 mm (0.2″), - Cast iron, flat pan; flatness deviation not greater than ±0.1% of the diameter, - Frying time: from approx. 40 to 345 s, - Maximum heating power: approx. 28 kW, - 2 temperature sensors per pan. Included: exhaust hood, dispenser, spray system, oil filter.

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm Ppsdpfx Aed Tm Hnjhljt -Weight: 1212 kg

Condition: good (used), Automatic drill, drill press, drill press, stand drill, pillar drill Ppodpfx Ahecghg Uolet -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

Condition: good (used), Heid S-200 CNC Lathe Pjdpfx Ahjx Elw Eslopt Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock Travel: 175 mm Tailstock Spindle Taper: Morse Taper: MT4 Quad Stroke: 140 mm Quad Diameter: 95 mm Driving Force: 17 kN Power Supply: 50 Hz, 3x: 380 V Total Power Requirement: 65 kVA Spindle Speeds: Infinitely Variable from 0 rpm to 4000 rpm Spindle Bore: 77 mm Tool Shank Cross-Section: 25x25 mm Swing Diameter over Bed: 420 mm Maximum Swing Diameter: 250 mm Turntable Slide: Longitudinal Travel (Z-Axis): 1150 mm Cross Travel (X-Axis): 230 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our Shop! International shipping costs on request!