Used Markert Clean-Tec for sale (11,343)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm Njdsvri Nmepfx Amnswg - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm Nwedpfx Amjlzhhconsg - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 50,000 rpm, overall weight: 3,800 kg, workpiece weight (max.): 200 kg, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 2,000 mm, Equipment: documentation/manual, Röders RXP300 -overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: X-axis: 320 mm Y-axis: 300 mm Z-axis: 200 mm (height) The clearance height is 390 mm above the machine table without chuck. Machine table: Size: 370 mm x 350 mm Workpiece mass: Nwodpfjvvigmjx Amnsg Maximum 200 kg Axis drives: Highly dynamic linear motors in all axes with integrated cooling. Feed rates: 0 - 40,000 mm/min in all axes. Spindle: HSK25E 50,000 rpm Tool changer: 42-way Automatic 3D probe Control: Röders RMS6 in current version (2024) A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- Nsdpfxovvlmcs Amnswg The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: excellent (used), Continuous mixer M-tec D 10 Nwjdpfx Asirfp Ijmnjg Drive power 2,2 kW Mixer capacity approx. 20 l/min 14 pieces available Very good ready to use condition, directly from production!!!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 19,090 h, functionality: fully functional, machine/vehicle number: 10221-005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 320 mm, table length: 320 mm, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine can be dismantled and loaded for €3,000. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Spindle Max. speed: 42,000 rpm Tool changer Tools in ATC: 48 + probe Nwjdpewyclvefx Amnsg Pallets Number of pallets: 6 ITS 50 pallets: 54 Pallet size: 320 x 320 mm MACHINE DETAILS Total operating hours: 54,027 h Milling hours: 19,090 h Setup time: 2,353 h

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Nodpfx Aeqabm Eomnswg Throughput / capacity depending on material and purpose. Price on negotiation!

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year 01/08) - Engine: electric 30kW - 1250l water tank - pressure gauge - pressure regulator - safety valve - Steel frame powder coated - Aluminum covers - Forklift lugs and crane eyes - Dimensions with 1250l water tank: approx. 1.100 x 1.760 x 1.770 - Empty weight: 1.085 kg - Year of construction: 2013 - Operating hours: approx. 1500 h Condition: high pressure pump 06/2022 overhauled. In very good used condition. Nwodpjg Tm N Aofx Amneg

Condition: good (used), Year of construction: 2005, functionality: fully functional, B-Tec model m-800 Year of construction 11/05 55kg net weight Dimensions in mm approx. 1600x750x580 Washroom dimensions: 570 × 470 × 520 mm 1 × tank for circulating medium Tank size max. 60 L 1 × container for fresh medium. Tank size max. 30 L 6 bar operating pressure Nwjdpfxjrt Rmne Amnjg --Sale on behalf of the customer----

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll to roll (100m/min). Nwsdpfx Amehr Rlysnjg sheet material can also be processed, separate insertion tables are included exchange cassette (structure fine linen) The machine is in a very good condition, few operating hours machine book / instruction manual

Condition: new, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,184 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,722 mm, Year of construction: 2025, Equipment: ABS, Bodywork * Docking funnel 8" mounted at the upper rear, behind the tank, lockable with a manual slide gate * Direct idling at the rear side * Automatic pump shut-off Nwedpexmudnefx Amnsg * Lincoln centralized lubrication system for optimal time-based lubrication of slewing rings and axles (for drum brake 36P) * Bracket with two wheel chocks Pump * Vogelsang pump, capacity 6,000 L/min Axles * VALX axles with drum brakes, 9 tonnes, offset 0 Brakes * WABCO EBS braking system * WABCO tire pressure monitoring system according to R141 * TPMS system Axles * Forced-steering axles Tire size * 385/65 R22.5, 9 t Tires * Brand: APOLLO Lighting * 24-volt lighting system * Side marker lamps with integrated flashing function * Work lights left and right at the first axle * Two LED work lights at the rear (one left, one right, mounted on the hose racks) * Two 7-pin connectors and standard 15-pin connector Accessories * Ball valves for complete tank emptying * Stainless steel vent container Paintwork * Tank painted RAL 7030 stone grey * Chassis painted RAL 7016 anthracite grey

Condition: ready for operation (used), Year of construction: 1995, Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible. Nsdorn Rc Depfx Amnswg

Year of construction: 2023, condition: ready for operation (used), Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging. Nwsdpfx Ameuwrwusneg

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Njdsyr Aiqepfx Amnowg

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Shows slight signs of wear (see pictures) Njdpfx Aewm Il Usmnjwg

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,800 kg, color: blue, empty load weight: 1,800 kg, Year of construction: 2010, Beach cleaning trailer: - Kässbohrer - BeachTech 2000 - Year of manufacture 2010 - PTO drive (540 rpm) - Working width 185 cm - Feeler wheels - 543 cm x 230 cm x 210 cm - Empty weight: 1,800 kg; permissible gross weight: 2,800 kg - Area performance: 22,200 m³/h - 30 cm max. working depth - 1.5 m³ collection container can be tilted backwards - Rake / sieve Nwjdpfx Aovnt N Asmneg - Smoother - Preparation for irrigation - Working speed 12 km/h - Required tractor: 70 HP Receive all newly listed vehicles by email - sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,800 kg, color: blue, operation weight: 1,800 kg, empty load weight: 1,800 kg, Year of construction: 2003, Beach cleaning trailer: - Kässbohrer - BeachTech STR 2000 - Year of manufacture 2003 - PTO drive (540 rpm) - Working width 185 cm - Feeler wheels - 543 cm x 230 cm x 210 cm - Empty weight: 1,800 kg; permissible gross weight: 2,800 kg - Area performance: 22,200 m³/h - 30 cm max. working depth Nedpfevnmg Uex Amnswg - 1.5 m³ collection container can be tilted backwards - Rake / sieve - Smoother - Working speed 12 km/h - Required tractor: 70 HP Receive all newly listed vehicles by email - sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, mileage: 999 km, power: 4 kW (5.44 HP), first registration: 01/1995, fuel type: gasoline, color: orange, empty load weight: 180 kg, Year of construction: 1995, Beach cleaner: - Nolte Sandcleaning Technology - Delfino Nwjdpfx Amoqxuf Ajnog - own drive - Honda GX160 (5.5hp) - vibrating screen - collection container - dead man's switch - Adjustable cleaning depth (0-12cm) - Working width 75cm - Weight: 180kg - Machine dimensions: 86cm x 158cm x 87cm - Theoretical area performance: 2,500m²/hour - Year of construction: 1995 You can find a video of this offer on You can find our entire vehicle fleet at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Year of construction: 2016, condition: excellent (used), 24V , 100VA , max.7 bar Nodolqwz Tjpfx Amnswg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 88745-38, functionality: fully functional, operating hours: 6,785 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 36,000 rpm, table load: 800 kg, New spindle and computer installed in 2018 Nwsdpfjwi Ndkjx Amnsg No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X / Y / Z: 800 / 600 / 400 mm Number of axes: 3 Speed: 36,000 rpm Tool holder: HSK 50 E Tool changer: 30-station Table: 880 x 700 mm Workpiece weight: 800 kg MACHINE DETAILS Dimensions: approx. 2.85 x 3.15 x 3.0 m Weight: approx. 8.5 t On-time: 179,460 h (total) On-time since 2018: 38,141 h Spindle hours since 2018: 6,785 h EQUIPMENT - Incl. 29 tool holders - No coolant/minimal quantity lubrication - Spindle cooling system - Incl. probe - Without Vice and clamping device (shown in picture)

Condition: used, W x L 60 cm x 250 cm Njdou Arh Repfx Amnswg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Ceramic angle standard from Wilbanks (CoorsTec) 600x460x80mm Nsdpfjq Tdlzex Amnswg Perpendicularity < 4µm Little used, very good condition Measurement protocol on request (surcharge)

Condition: excellent (used), SILOMAT for silos FREE FALL type or PRESSURE TYPE. For plastering machine or other use. /dozens of pieces/ We have also for sale about 200 transportable silos (free fall or pressure type). Nedpelf Niqefx Amnowg Sales in Poland (BIESLKO BIALA lub OLSZTYN) or Italy (RIMINI). KNAUF, BAUMIT, PFT, M-TEC, MALTECH, MIXER, PUTZMEISTER, mortar, plaster, cement, silos, silo, silomat, silomats

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Njdowhc U Topfx Amnswg

Condition: used, functionality: fully functional, WLD-TEC Gasprofi 1 Gas Burner with bottle and pedal. Nwsdpeubc Hfjfx Amnog 2 for sale. 1 piece/200 EUR. Good working condition. Please check out our other listings as well.