Used Angle Plates Cast Iron for sale (19,548)

Condition: excellent (used), Splash guard Diameter 510 mm Height 100 mm Diameter of centering flange 90 mm Thread pitch 5.2 mm Lsdofm Tp Sjpfx Amrjac Weight 68 kg

Condition: good (used), Faceplate Diameter 400 mm Max. 960 rpm Laodpfxsdbpfve Amrjc Rotatable jaws Taper diameter 106.39 mm Bolt circle 133.4 mm

Condition: excellent (used), Splash plate Diameter 510 mm Lasdpsfm Tquefx Amrsc KKG 8 Weight 111 kg

Condition: new, ZF anchor plate 6629.235.001 ZF anchor plate 6629.235.001 Original ZF anchor plate from stock. Unused spare part in original packaging. Manufacturer: ZF Friedrichshafen AG Designation: Anchor plate Lsdpfszfi Sqex Amrjac Part number: 6629.235.001 Marking: 75-64-04 ZF number: 60140176 Condition: NOS (New Old Stock) Original part: Yes

Condition: excellent (used), Year of construction: 1996, overall weight: 4,200 kg, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, plate height: 350 mm, plate width: 1,750 mm, groove spacing: 250 mm, T slotted bed plate STOLLE - DT MACH-ID 9373 Lajdezcn Iyepfx Amrsc Make: STOLLE Type: DT Year: 1996 T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Make: Davi Promau Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Ljdpfx Aszcnuyemrsac Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V total power requirement 13.5 kW weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Lasdpezc Rv Tofx Amrjc Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options * Rolling process completed in a single pass - Mobile control unit * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Bosch Rexroth manifold plate NG16 and loose parts R901190435 9000004130 # BOSCH REXROTH Lodpfx Amozd Ny Eereac

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Complete series plate NG16 and loose parts R901190435 9000004130 BOSCH REXROTH Ledpjzd Nyxofx Amrjac

Condition: good (used), Year of construction: 2015, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 90 engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good / well-maintained condition (!!) Current list price approx. 80.000 euros Features: - Electro-hydraulic / slide-guided guillotine shear - HACO CNC control model "SC 90" * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulic hold-down devices - Front finger guard - Ball bearings in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety guard (no light barrier) Lajdpfszczgcox Amrjc - Operating instructions in German (PDF)

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Laodpfx Aozcqy Sjmrec Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: new, Year of construction: 2012, Heating: Electric Dimensions (W x D x H): 2134 x 598 x 1092 mm Roller diameter: Ø 330 mm (13 inches) Ironing width: 1504 mm (59.2 inches) Hourly output: 34 kg/h Laodpfx Amjw El Azjrec Evaporation rate: 17 liters/h Roller speed: 1 to 6 m/min Moist air flow rate: 350 m³/h Noise level: 55 dB(A) Thermal leakage rate: 3% Foot threading type: M10 Weight: 447 kg Packaging volume: 2 m³ Electric power: 20.7 kW Voltage: 400 V / 29.1 A / 3ph + N / 50/60 Hz Year of manufacture: 2012

Condition: used, Year of construction: 1900, table length 1000 mm table width 800 mm table height 200 mm work height max. 1100 mm material Stahlguss total power requirement kW Laedpstwbrnjfx Amrsc weight of the machine ca. 250 Kg dimensions of the machine ca. 1,0 x 0, 8 x 1,1 m Measuring plate on 3 adjustable feet

Condition: used, Year of construction: 1900, length 1800 mm Laodpfxotwbrhj Amrjc width 430 mm work height max. 700 mm length in width 510 mm length in total 1920 mm total power requirement kW weight of the machine ca. 300 Kg dimensions of the machine ca. 1,9 x 0,5 x 0,7 m Measuring plate on 3 adjustable feet

Condition: excellent (used), Year of construction: 2000, length 5.000 mm width 2.000 mm Thickness 210 mm Lsdpfst Smhvsx Amrjac material Stahlguss control total power requirement kW Weight 6 t dimensions of the machine ca. m Measuring plate / alignment plate as good as new, with integrated alignment points, 3 x longitudinal T-slots,

Condition: used, Year of construction: 1984, plate width 3100 mm plate thickness 6 mm distance between columns 3150 mm no. of strokes 20 - 75 Hub/min cutting angle 0,5 - 1,25 ° down holder 16 Stück voltage 380 V frequency 50 Hz power capacity 10 kW Lajdpfjtv Ihqex Amrec weight of the machine ca. 6 t dimensions of the machine ca. 4,0 x 2,1 x 1,7 m with electr. back stop, 950 mm

Condition: used, Year of construction: 1900, length 1500 mm width 1000 mm table height 250 mm work height max. 1100 mm Material Stahlguss 0 Ledpfetwbr Iex Amrjac weight of the machine ca. 0,9 t dimensions of the machine ca. 1,5 x 12,0 x 1,1 m Measuring plate on 3 adjustable feet

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Ledpfx Amsxdigfjrsac

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Lsdpszbqqujfx Amrjac Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm Ledpfx Amsw Dgi Tsrjac - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: used, length 450 mm width 140 mm Ljdpfxjzcghrs Amreac height 100 mm 2 magnetic plates with control unit approx. 450 x 140 x 100 mm

Condition: used, length 900 mm width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg Lsdpjzcgkysfx Amrjac We have two identical magnetic chucks with the same dimensions. See S9061

Condition: used, length / mm Ledpfx Amszcgiioreac width / mm

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Laedpfsv Syyvjx Amrec

Condition: good (used), motorized limit stop behind Ljdpfxohtq N Ns Amrjac foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.