Plate Bending Machine - 4 Rolls
DAVI (PROMAU) MCB 2027

Name: DAVI (PROMAU) MCB 2027
Brand: DAVI (PROMAU)
Availability: InStock

Year of construction

2008

Condition

Used

Location

Ahaus

Plate Bending Machine - 4 Rolls DAVI (PROMAU) MCB 2027

Machine data

Machine type:: Plate Bending Machine - 4 Rolls

Manufacturer:: DAVI (PROMAU)

Model:: MCB 2027

Year of construction:: 2008

Condition:: good (used)

Price & Location

Location:: 48683 Ahaus

Call

Details about the offer

Listing ID:: A22114878

Reference number:: 1125-9401307

Update:: 12.06.2026

Description

sheet width 2050 mm
plate thickness 20.0 mm ST
pre-bending 16.0 mm ST
diameter of upper rolls ca. 270 mm
side roll diameter ca. 240 mm
diameter of lower rolls ca. 250 mm
Number of working hours ca. 7.800 h
Control "EASY PRO"
oil volume ca. 200 Liter
voltage 380 V
total power requirement 13.5 kW
weight ca. 9.000 kg
Dimensions (only the machine) 4000 x 2080 x 1800 mm
Good condition (!!)
Current list price approx. 150.000 euros
Special price available upon request

Features:
- Robust electro-hydraulic 4-roll round bending machine
* Arc-shaped feed of the side rollers (swing arm technology)
- 4-roller design offers a wide range of bending and rounding options
* Rolling process completed in a single pass
- Mobile control unit
* DAVI "DAVI EASY PRO" numerical control
* Manual or automatic operation selectable
Iasdpfxezc Rv Tj Aa Iou
* Programming "Self-Learning" mode available
* Control of all rollers and machine axes
* Digital position display for the rollers
- Curved feed of the side rollers (DAVI "PSG" guide system)
* Tight bending radii of up to 1.1 times the upper roller diameter possible
* Instead of the usual 1.5 times with linear guides
* Optimal bending = short sheet ends during bending
- Conical rolling possible via roller tilt
* Tight diameters possible due to low machine frame
- Electronic roller parallelism
- Stepless speed adjustment (max. 5.0 m/min)
- Bending on both sides
- Forged and hardened rollers with a hardness of 53-55 HRC
- Low-maintenance, robust machine design
- Easy sheet removal thanks to low machine frame
- Sturdy welded steel construction
- Electro-hydraulic swivel bearing for easy tube removal
- Operating instructions

Seller

Registered since: 2011

740 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Band saw BERG+SCHMID GBS 218 Eco AutoCut

Waiblingen

1,327 km

Band saw
BERG+SCHMIDGBS 218 Eco AutoCut

Call

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. Iaodpfx Aot I R Edja Ieu - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

See details

Listing

Soerendonk

966 km

Lathe
NHH

€3,250

Fixed price plus VAT

Call

Listing

Hydraulic Shipyard Dishing Forming Press URSVIKEN VPF 1000

Babberich

984 km

Hydraulic Shipyard Dishing Forming Press
URSVIKENVPF 1000

Call

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Isdpekvmi Sofx Aa Isau Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Germany

1,414 km

Pillar Drilling Machine
StrandsS 25

Call

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm Iajdpfxou Idhyo Aa Ieu table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

See details

Listing

Band Saw BERG & SCHMID - Halbautomat GBS 305 HA-I Easy

Niederlangen

1,037 km

Band Saw
BERG & SCHMID - HalbautomatGBS 305 HA-I Easy

Call

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm Iaodpfju Dbvtox Aa Ieu 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

See details

Listing

Zuchwil

1,314 km

Milling machine
Schaublin53N

Call

Condition: excellent (used), Universal Milling Machine Schaublin 53N Iajdjyxgyhspfx Aa Iju Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information.

See details

Listing

Iszkaszentgyörgy

1,993 km

Center lathe
TOSSN50Cx1500

Call

Condition: new, Year of construction: 2026, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1500 mm Iedpfxeyt Iaqs Aa Ieau Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 3200 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

See details

Listing

Częstochowa

1,884 km

Industrial robot
KUKAKR360/R2830/FLR

€29,900

Fixed price plus VAT

Call

Condition: new, Year of construction: 2022, load capacity: 360 kg, arm reach: 2,826 mm, Model: KR360/R2830/FLR Iedpjtuc Dgjfx Aa Isau Quantity: 6 pieces available Year of construction: 2020/2022 Axles: 6 Maximum reach: 2826 mm Load capacity: 360 kg Maximum load: 472 kg Control system: KRC4 Teach Pendant No operating hours Originate from a factory for the production of electric cars - never in operation

See details

Listing

Horizontal lathes Weiler E35 1997 Weiler E35

Wijchen

961 km

Horizontal lathes Weiler E35 1997
WeilerE35

€4,500

~~€5,000~~

Fixed price plus VAT

Call

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler Isdpfx Aaownh I So Isau - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

See details

Listing