Used Tmp Single–Crank Mechanical Press for sale (22,923)

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t Bwsdpfxjvc Ax No Am Ren dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Single-column hydraulic press MAE type S63SZ SO Bsdpodzp Trofx Am Rswn . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Bwedoi Db Ibepfx Am Ren Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Bsdpjv Uraasfx Am Rown Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Bedpfjyupulox Am Rswn Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: new, Year of construction: 2026, pressing force: 15 t, C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 tons. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for insertion work, assembly processes, and small-batch production in industrial applications. ##### Technical Data + Information: ==== General Information - Design: C-frame / Single-column press - Manufacturer: DURENDUS - Pressing force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Installation height max.: 350 mm - Working height: 800 mm - Overall height: approx. 2,000 mm - Overall width with control cabinet: approx. 900 mm - Overall depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guidance: 2-way ==== Hydraulic Cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Starting speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & Drive - Hydraulic unit: DUPLOMATIC - Hydraulic pump: ASC - Flow rate: 7.5 l/min - Tank volume: 50 l - Cooling: Air cooler - Oil level monitoring: electronic - Hydraulic unit: mounted on top of the machine ==== Control - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" - Pressure setting via touchscreen - Stroke setting via touchscreen - Temperature monitoring of hydraulic oil - Error display on display - Remote service / remote maintenance possible - Operation: Two-hand operation ==== Safety - Light curtain - Two-hand operation - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 2.2 kW - Lighting: LED Bwodpsy Twg Iofx Am Ren - Protection class control cabinet: IP 54 ##### Application areas: Insertion, assembly work, small-batch production, jig and fixture construction, toolmaking, metalworking, fine assembly, testing, workshop applications (Hydraulic press, C-press, C-frame press, Single-column press, 15 T press, 15-ton press, assembly press, insertion press, small-batch press, workshop press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly attractive prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Bwjdpjy Nd Svjfx Am Rsn

Condition: used, Year of construction: 1976, pressure 025 t table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm ram surface 350 x 250 mm Bwodpfsy Nd Spjx Am Ren strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm Bwedpfx Amsvut N Ao Rsn with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm Bwsdpfx Aev Az T Sem Rsn daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3850 kg dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - new braeke plate - current press inspection

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm Bsdpfx Asym D E Aem Rewn stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW Bsdpfxoy Rutao Am Rswn weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m AS SPARE PARTS DISPENSER

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Bwedpfx Amoy Rur Nj Ren Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1996, pressure 40 t stroke 4 - 100 mm no. of strokes 130 /min throat 225 mm dayligth 475 mm Bwodpjy Rurpjfx Am Rsn table surface area 650 x 465 mm hole in the table 210 x 170 mm table height over floor 710 - 950 mm table adjustable 240 mm ram surface 430 x 240 mm ram adjustment 85 mm power requirement 2,2 kW Weight 3,3 t dimensions (WxDxH) 1,1 x 1,9 x 2,2 m with motor, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, motoric centralized lubrication, two-hand and foot operation

Condition: used, Year of construction: 1978, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 650 x 515 mm hole in the table 115 mm Bodpoy Rurisfx Am Rjwn table height over floor 790 - 1020 mm table adjustable 230 mm ram surface 390 x 180 mm ram adjustment 70 mm power requirement 2,0 kW weight 2,6 t dimensions (WxDxH) 1,1 x 1,4 x 2,2 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm Bjdpey Ruqxefx Am Rewn ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1990, Pressure 250 t stroke 16 - 160 mm no. of strokes 33 / 50 /min Throat 410 mm distance table/ram, max. stroke up, adjustment up 540 mm Bwodey Ruqrepfx Am Rjn table surface area 1100 x 790 mm Hole in the table 660 x 320 mm table height over floor 720 mm Passage to the back 590 mm ram surface 800 x 500 mm ram adjustment 120 mm power requirement 16,0 / 23,0 kW weight 28,5 t dimensions (WxDxH) 2,1 x 3,2 x 3,4 m polumschaltbar with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, motoric centralized lubrication

Condition: used, Year of construction: 2007, pressure 40 t stroke 12 - 100 mm no. of strokes 60 - 150 /min throat 220 mm dayligth 340 mm table surface area 650 x 480 mm ram surface 370 x 300 mm ram adjustment 70 mm Bwedpsyx Intjfx Am Ren power requirement 4,0 kW Weight 3,0 t dimensions (WxDxH) 1,2 x 1,5 x 2,3 m with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm Bwodpfjyx Imcjx Am Rjn stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1993, pressure 80 t throat 280 mm Bwsdpfx Aoyx Ikuem Rsn stroke 10 - 140 mm Stroke rate 85 / min Distance table/ram, max. stroke up, adjustment up 380 mm Table surface area 850 x 560 mm Hole in the table 300 x 200 mm Table height above floor 790 - 950 mm Ram surface 420 x 210 mm Ram adjustment 60 mm Power capacity 4,0 kW Weight 4,5 t Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1989, pressure 16 t throat 200 mm stroke 160 mm dayligth 490 mm table surface area 1300 (3300) x 250 mm table height over floor 935 mm ram surface 65 mm power requirement 4,0 kW weight of the machine ca. 2,2 t required space 1,4 (5,4) x 1,3 x 2,4 m Bwodpfxjyx Ii Ro Am Rsn with oilhydraulic drive, shaft straightening device length of straightening table approx. 1300 + 2x2000 mm

Condition: used, Year of construction: 1978, pressure 125 t throat 340 mm stroke 20 - 160 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 480 mm Bwodpfjyx Iiwox Am Rsn table surface area 1000 x 660 mm table height over floor 730 mm ram surface 600 x 300 mm ram adjustment 75 mm power requirement 8,5 kW weight 7,8 t dimensions (WxDxH) 1,4 x 2,8 x 2,7 m with motor, back gears, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, two-hand and foot operation

Condition: used, Year of construction: 1976, pressure 400 t throat 520 mm stroke 20 - 200 mm no. of strokes 30 /min distance table/ram, max. stroke up, adjustment up 680 mm table surface area 1600 x 1000 mm table height over floor 715 mm passage to the back 1000 mm ram surface 1300 x 800 mm ram adjustment 130 mm Bwodoyx Iikepfx Am Rjn power requirement 38,0 kW weight 41,0 t dimensions (WxDxH) 2,1 x 2,6 x 4,2 m with pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, two-hand operation

Condition: used, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t Bedpfx Amoyx Iids Rjwn dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm Bwjdpfsyx Ihysx Am Rjn table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation