Used Tmp Single–Crank Mechanical Press for sale (23,053)

Year of construction: 1985, condition: excellent (used), functionality: fully functional, Manufactured by Voronezh plant (Russia) Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Slider ejector stroke, mm 100 Nedpfx Aajxwd Iwoaewf Motor capacity, kW 110 Press dimensions, mm 4670 x 4370 x 8110 Press weight, kg 141500

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder Nsdpfx Aefim Thoaaowf - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. throat 280 mm Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Nwedpfslb I Dzox Aaaof Weight 4.5 tons good condition

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm table size 570 x 470 mm ram surface 250 x 200 mm clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz Nodsffm Hhepfx Aaajwf - Table height adjustment - Overload protection by crushing plate - clutch-brake combination by WEINGARTEN friction thread clutch - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm weight approx. 2,6 ton.

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Nwsdju Nfinopfx Aaaef Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and stamping, powered through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structure. CRONOSSTECH CEHP-TB-250 – H-Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Key Advantages: - Stable operation with large dies enabled by the 1200×1000 mm table size Nedpfxjx N Sc Aj Aaajwf - Die/equipment protection via hydraulic overload protection - Controlled and user-friendly operation with PLC + touch screen - High operator safety with light curtain (photoelectric guard) - Low maintenance requirement thanks to automatic lubrication system Application Areas: - Punching / cutting / stamping operations - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balanced piston in ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric guard) • Enclosed gear group in lubricating oil bath • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of the bed • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table–ram distance: 500 mm Clearance between columns: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are handled directly by CRONOSSTECH.

Year of construction: 1986, condition: like new (used), Good working condition Manufactured in Romania Nwsdpfx Aaoggfh Soajf YOM: 1986 Mechanical Pressing nominal force: 10,0 MN Number of strokes/min: 20 Ram stroke: 310mm Work surface: 2290mm x 1600mm Total dimensions: 7880mm (6880 from the ground) x 4150mm x 2350mm Total weight: 108009kg

Condition: used, pressure 150 t Table dimensions 1000 x 360 mm Nwodpfxjyuqdhj Aaaof voltage 400 V

Condition: not inspected (used), functionality: unexamined, pressing force: 50 t, stroke length: 40 mm, overall weight: 3,000 kg, rotational speed (max.): 500 rpm, rotational speed (min.): 100 rpm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Pressing force: 50 t Ram stroke: 16 - 40 mm Flywheel speed range: 100 - 500 rpm Decoiler diameter: 1,000 mm Nwedpfx Asy D Thpsaajf MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,000 x 2,200 mm Machine weight: 3,000 kg External reference: 43

Condition: used, pressure 150 t Table dimensions 1000 x 630 mm voltage 400 V Inclineable mechanical press with updated electrics (CE2004) and bolster plates. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Nwjdpfxjyqv Ahe Aaajf

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation Nwjdjvuk S Uopfx Aaaef as is where is, WITHOUT putting into operation

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz Nsdpfx Asyz Dtdeaaswf - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: good (used), Year of construction: 1981, machine/vehicle number: 055-014-19, Offer 25275 Nedpfey Ew Szjx Aaaowf Technical Data: - Max. press force: 25 t - Max. ram stroke: 500 mm - Stroke speed: 200 mm/sec - Return speed: 450 mm/sec - Installation height: 800 mm - Throat depth to ram center: 380 mm - Ram clamping surface: 440 x 360 mm - Ram clamping pin: 40 mm - Table size: 630 x 500 mm - Table opening / through hole: 180 mm - Electric foot pedal - 2 hand control panels - Drive: 400 V / 12.5 kW - Space requirement approx.: W 800 x H 2750 x D 1150 mm - Weight approx.: 2200 kg

Condition: good (used), Year of construction: 1982, machine/vehicle number: 055-013-15, Offer 25274 Technical Data: - Max. pressing force: 25 t - Max. ram stroke: 500 mm - Stroke speed: 200 mm/sec - Return speed: 450 mm/sec - Installation height: 800 mm - Throat depth to centre of ram: 380 mm - Ram clamping area: 440 x 360 mm - Ram clamping pin: 40 mm - Table size: 630 x 500 mm - Table opening / through hole: 180 mm - Drawing cushion: 10 t - Electric foot switch - Two-hand control panel - Drive: 400 V / 12.5 kW - Required space approx.: W 800 x H 2750 x D 1150 mm Nwodpoy Ewx Ujfx Aaasf - Weight approx.: 2400 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 054-008-212, Offer 25272 Technical data: - Max. pressing force: 25 t - Max. ram stroke: 500 mm - Stroke speed: 0 – 2.4 m/min - Return speed: 0 – 12 m/min - Installation height: 800 mm - Throat depth to ram center: 360 mm - Ram clamping area: 440 x 360 mm - Ram mounting shank: 40 mm - Table size: 630 x 500 mm - Table bore/opening: 180 mm - Electric foot switch - Two-hand control panel - Drive: 400 V / 8.75 kW Nwjdey Ewtropfx Aaasf - Required space approx.: W 800 x H 2750 x D 1150 mm - Weight approx.: 2000 kg

Condition: excellent (used), pressure 6,3 t throat 200 mm stroke 200 mm dayligth max 500 mm table surface area 450 x 420 mm Nwjdpfewuu A Aox Aaaef weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 0,6 x 2,0 m

Condition: new, pressure 17,0 kN Nodpfefv Avvjx Aaaewf stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, pressure 26,0 kN stroke 60 mm Nsdpfefv Avrjx Aaaewf throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 34,0 kN stroke 40 mm throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm Nsdpfx Aajfv Avyeajwf spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 70300 € 1328.67 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads Nwsdpfx Aswiqq Sjaasf € 192,00 bolster plate € 2.580,00

Condition: used, Repair-needing Single-Column Eccentric Press CHINA Type JB23-16 Machine no. 1711BL16D11-17 Year of manufacture: 2017 Press force: 16 tons Throat depth: 160 mm Table size: 480 x 320 mm, with 18 mm T-slots Ram surface: 175 x 130 mm Table through-hole: Ø 125 mm Ram stroke: 60 mm Ram adjustment travel: 40 mm Max. installation height: 330 mm Clamping pin bore: Ø 35 mm Nedpfxoyxrhws Aaajwf Ram strokes: 130 strokes/min Motor power: 2.2 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch - No stroke adjustment Required space (L x W x H): 1300 x 900 x 1850 mm Weight: 790 kg Mechanically in need of repair, clutch makes loud knocking noise. Release mechanism requires reworking. We are clearing space Priced to sell – ideal for export.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 55200 € 1043.28 € 200 to 500 mm 1000x600 mm 640 mm 21 mm/s 2 mm/s 5.5 kW 1800 mm 1300 mm 2500 mm 6400 kg 2 speeds Nwodoynnfiopfx Aaajf adjustable max. pressure manomete

Condition: new, neu ca. 4 Monate ab Auftragse Italien 43200 € 825.12 € 150 to 500 mm 800x600 mm 630 mm 22 mm/s 3 mm/s 4 kW 1800 mm Nwodpfx Aeynnfceaajf 1200 mm 2400 mm 4500 kg 2 speeds adjustable max. pressure manomete

Condition: new, neu ca. 4 Monate ab Auftragse Italien Nedpfjynnd Sex Aaaowf 31400 € 599.74 € 100 to 500 mm 800x600 mm 615 mm 26 mm/s 4 mm/s 4 kW 1600 mm 900 mm 2300 mm 3100 kg 2 speeds adjustable max. pressure manomete

Condition: new, neu ca. 4 Monate ab Auftragse Italien 25000 € 480 € 70 to 500 mm 700x500 mm 600 mm 25 mm/s 5 mm/s 4 kW 1400 mm 900 mm Njdpfxoynnd Es Aaaowf 2250 mm 1900 kg 2 speeds adjustable max. pressure manomete