Used Roll Embossing Machine for sale (68,172)

Condition: good (used), 3-Roll Plate Rolling Machine Type R55 Working length 1020 mm Maximum sheet thickness 1.25 mm Good, fully functional condition. Nwedpfx Amjy Rx Dcsnjg

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW Nwodpfx Asy Ez A Remneg weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm Nedpfx Amodkxlkenewg - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm - weight 325 kg - 400 volt 3 phase

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons Nodpfx Aowkaalemnowg The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. Nwedpfx Amjxya Hzenog ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: good (used), - Type: AKLE-L 700 - Year of manufacture: 2011 - Serial number: 0127930010 Njdporu Dd Refx Amnjwg - 2 x available both are new unused

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, working width: 300 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 05/2027, type of input current: three-phase, conveyor belt width: 300 mm, year of last overhaul: 2024, Lippelt Mini Rustica Roll Line For all types of specialty rolls Stainless steel construction Simple and efficient production of square dough pieces Robust engineering Nwsdpfxey H Utlj Amnsg Connection: 400V, 16A-CEE plug Dimensions approx.: L 2300 x W 750 x H 1370 mm Used machine We have more bakery machines in stock for you!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system Nsdpfx Amjxytmhenewg - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg Nwjdpfx Amsyvvrhjnog dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal Nwedpfxeyvvrbj Amnsg - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller Njdpfsyvvpyjx Amnewg - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers Nedpfx Asxaawgemnjwg - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: - Coil - Profiling line - Cutting and embossing tool - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Condition & Inspection: Njdsy Sxhwspfx Amnowg The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm Nwjdpfx Amexacdvenog side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, sheet width 3355 mm Nodpfxoyuql Ss Amnewg plate thickness 63,5 mm roll diameter 686 mm voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: good (used), functionality: fully functional, Year of construction: 1991, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 260 mm, roller diameter: 260 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 8,000 kg, total length: 5,000 mm, total width: 1,500 mm, total height: 1,600 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, MCB3028 4 roll hydraulic plate bending machine capacity 3000x13 mm Make Davi Italy - year 1991 Plate width 3000 mm Plate thickness 13 mm Prebending 10 mm top roll size 280 mm pinch roll 260 mm Electric power Hp 10 380/50 Vac Nsdpjy T Exfsfx Amnewg Configuration installed: -Hardened rolls -Conical hydraulic attachment -Digital position readouts infinitely variable speed control via hydraulic proportional joysticks hydraulic motor driven roller rotation with axial gearbox each roll central independent front open hydraulic drop-end to unload closed shells machine operating console centralized fully hydraulic -Extended rolls front shafts -one plus station hydraulic to connect a support ---- Cleaned, controlled repainted , tested Machine in optimal working conditions ready for use. CE quality certification made in Italy . Manuals and schematics original documents with the machine.

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed Nwodpfx Aey Azgwemnsg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Nedpfxsy Tbf Ie Amnjwg Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm Njdpfx Ajxl Ebhsmnowg

Condition: used, total length: 5,250 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 6.000 kg - Documentation available: No - CE certificate present: No - Serial number: 1011268 - Drive system: Conventional - Number of rolls [pcs.]: 4 Nwsdpfow Elvhox Amnsg - Power [kW]: 5.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 5250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, total length: 6,300 mm, total width: 2,000 mm, total height: 1,800 mm, Empty weight: 24.000 kg Price: On request Nwsdpexyklnsfx Amnjg - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 10659 - Drive system: Conventional - Number of rolls [pcs.]: 4 - Max. sheet thickness [mm]: 25 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 350 - Bottom roll diameter [mm]: 300 - Transport dimensions: 6300mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 24000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Nwedpfxjxdigfe Amneg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 6,500 mm, total width: 2,400 mm, total height: 2,000 mm, Empty weight: 23.000 kg Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. Nodox U Dmwepfx Amnewg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 - Top roll diameter [mm]: 350 - Bottom roll diameter [mm]: 250 - Options: Plate support, Cone rolling - Transport dimensions: 6500mm x 2400mm x 2000mm (l x w x h) - Transport weight [kg]: 23000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2023, machine/vehicle number: M170-382, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (top) diameter: 170 mm, roller length: 1,600 mm, working width: 1,600 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, overall weight: 2,310 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,130 mm, power: 55 kW (74.78 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, We are offering this hydraulic plate rolling machine Knuth KRM ST-15/6.0, brand new, year of manufacture 2023. Nwjdpfx Asyyd S Rjmnog The machine was ordered for a customer who changed their mind, so we are compelled to sell it at a promotional price. Currently, the machine is located at Knuth's headquarters in Wasbek, Germany, and has never been used. If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: 081-2010, actuation type: hydraulic, controller manufacturer: Swiss Bend-IT technology V,3,4,0, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, overall weight: 750,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,890 mm, Haeusler VRM-HY3600-4712 Four Roll Plate Bending Machine (2010) Cold capacities Prebending/rolling steel with yield strength 620N/mm2 - 3,600mm plate width - 4,000mm diameter - 200mm to 270mm plate thickness 4 rolls Drop end bearing rolls 1,500mm diameter top centre roll 1,450mm diameter bottom centre roll 1,100mm diameter side rolls 7,300 tonnes maximum top roll pressure 60CrMoV12.5 roll material Centre top and bottom driven rolls Hydraulic drive 1.2, 2.4, 3.6m/min rolling speeds Automatic top and bottom roll speed compensation Hydraulic roll adjustment Continuous roller tilt for cone rolling Automatic centralised lubrication Nwsdpfx Aeyzr R Rsmneg Inertia braking for rolls rotation Overload protection for the machine Electrical overload protection against opening the drop end when bottom roller pressure is low Electrical protection against moving the bottom roller when the dropend is open Preselection of the rolling pressure on the bottom roller from the Control panel Swiss Bend-IT technology V,3,4,0 controls Windows XP embedded OS Beckhoff software Mobile/central control panel 750 tonne 15m long x 7.2m wide x 7.89m high 400V, 3 phase, 50Hz 24V control voltage 862kVA total power 35m3/hour compressed air at 4bar