Used Reinforcing Steel Bending Machine for sale (72,499)

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Cedpfeza D U Dsx Afwjrc Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Crodpfx Afownrt Sjwec Additional bending mandrels without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Crsdpfsy T R Swjx Afwoc Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2011, Stierli bending machine 300 HE / Like new, maximum 5 operating hours -CE marking -Year of manufacture 2011 Cjdpfx Aszbtfhsfwerc -Max. working pressure 300 KN -Stroke length 300 mm -Motor power 4 kW -Manual control -Foot switch -Various bending tools -Stop -Documentation Dimensions: L x W x H 1.5 x 1.2 x 1.5 meters / Weight 850 kg Errors and omissions excepted.

Condition: used, Year of construction: 2015, total length: 1,500 mm, total height: 1,800 mm, total width: 2,500 mm, Colour: Grey Empty weight: 1.000 kg Price: On request Capacity: 42 tons Codoyy Slxepfx Afwerc Max. bending stroke: 200 mm Table dimensions: - Length: 1250 mm - Width: 850 mm Ram dimensions: - Length: 300 mm - Width: 200 mm Model: Horizontal bending machine - Year: 2015 - Documentation available: Yes - └ Type Documentation: Electrical diagrams, Technical data, Operating system, User manual - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Motor power: 4.0kW - Transport dimensions: 1500mm x 2500mm x 1800mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Cjdpfx Afsyi Hrwswjrc Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm Csdpfjzap I Aex Afwerc - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible

Condition: used, Year of construction: 1993, 3 Rollers Bending Machine ZOPF TRENNJAEGER RS 302 ME Year of construction: 1993 Capacity: 1/4'' to 1 1/2'' - Ø 10 mm to Ø 60 mm Rectangular tube 50 x 30 x 3 Square tube 40 x 40 x 3 (see description on photo) Delivered with: 1 set of rollers 1'' - 6/4'' - 1 1/4'' + various (see photos) Voltage: 380 V Dimensions (L x W x H): 1000 x 1000 x 1600 mm Weight: approx 200 kg Crsdpfoza Eynsx Afwoc

Condition: new, Year of construction: 2026, shaft diameter: 50 mm, - Shaft diameter 50 mm - Rotates clockwise and counterclockwise Crjdpfx Ajwv Ufaefwoc - Suitable for horizontal/vertical use - Foot control - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2026, - Capacity 700 x 4 mm Oxbmp - Electrically adjustable rear roller Codpfxjh Rbvgs Afworc - Digital display - Hardened rollers - 2 speeds - Conical roller - Rotating upper roller - Brake motor - Foot switch - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2026, number of rollers: 3, - Capacity 700 x 4 mm - Conical rollers - Removable top roller - Brake motor - Foot control - Emergency stop Crsdpfx Aoh Raytjfwsc - Documentation - 400V

Year of construction: 2024, condition: new, MRB-S Series Technical data (see pictures) Standard equipment CE Conical bend Motorized back roller Additional control panel for upper and lower rollers which are operated with landing gear. SAE 1050 steel rollers Induction hardened rollers, Relaxed steel construction, at 2.5 and 3m Machine supports, brake system for precise bends, Digital display. Motorized back roller with puller Optional equipment Motorised under-roller mounting, ground rollers Extended rolls for profile bends, Special rollers for profile bending, Special packaging for international deliveries. MRB series: Technical data (see pictures) Standard equipment CE standard Digital display Conical bend Motorized back roller with tightening Additional control panel for upper and lower rollers, Csdpefin E Dofx Afwjrc which are operated with landing gear. operated by landing gear. SAE 1050 steel rollers, Induction hardened rollers, Relaxed steel construction, Braking system for precise bends. Optional equipment Motorized bottom roller with suit, stone rollers Extended rolls for profile bends, special rollers for profile bending, Special packaging for international Programmes Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. Crsdjftdh Iepfx Afwec We will be happy to provide you with further information on request.

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Cjdpfx Afodzzyfeworc

Condition: good (used), – Hydraulic – Adjustable stroke – Foot pedal operation Crsdey T D Hnjpfx Afwoc – Includes 5 dies: 2" / 1½" / 1¼" / 1/2" / 1/4" – 380V

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V Crsdpfx Afeu Ibzkewec connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: Crodou Ibvujpfx Afwoc -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm Crodeu Icdyepfx Afwec -mitlaufend -Verstellweg ca. 5mm *

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Crjdpfxjwivn Nj Afwsc Accessories: various bending tools *

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Crjdpfxeu Ibuko Afwoc Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm * Crodpfx Afeu Ibyyjwec

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine xH: 5,3 x 2,4 x 2,0 m Credpjyh D Nnsfx Afwjc

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Crjdowbvmiepfx Afwec Weight: 110 kg Very good condition

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel Crodpfsdz Srkox Afwsc - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Crodpfohmmfkjx Afwsc Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition