Used Meba 260 Gp for sale (3,724)

Condition: excellent (used), functionality: unexamined, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, Weinig Profimat 23 E, working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, spindle arrangement: 1 - Bottom - 5.5 kW 2 - Right + 3 - Left - 11 kW 4 - Top - 5.5 kW 5 - Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW air cushion in the table One driven roller in the table at the outlet. Includes tooling. Dodpfxezbz S Ne Ahgekp

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t Dodpfx Ahjy N D Nbsgekp dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, operating hours: 5,800 h, MEBA Mebamat 434 Automatic metal band saw Manufacturer: Meba Type: Mebamat 434 Dkedpfoy Egfdex Ahgep year of construction 2013 Condition: good, used Switch-on hours: 14.800h Sawing hours: 5682h NC-automatic version Motor 7.5 kW Saw band 6220 x 41 x 1.3 mm Belt speed 15 - 150 m/min. Max. Material passage Ø 430 / 430 x 430 Smallest Ø 5 mm Dimensions (L x W x H) 1700 x 3100 x 2350 mm Working height 750 mm Weight 4100 kg Zero stop Scraper chip conveyor Minimum quantity lubrication Automatic material height and width detection Roller conveyor 300cm 8x new replacement saw bands

Condition: new, functionality: fully functional, 2 speeds 35/75 m/min Djdpfx Ajx Sq Tfjhgekp Saw blade speed 15-150 m/min Saw blade dimensions 4200x34x1.1 mm Cutting range at 90 degrees: round 325 mm Cutting range at 90 degrees: flat 500x300 mm Cutting range at 45 degrees right: round 300 mm Cutting range at 45 degrees right: flat 300x300 mm Cutting range at 30 degrees right: round 200 mm Cutting range at 30 degrees right: flat 200x200 mm Cutting range at 45 degrees left: round 300 mm Cutting range at 45 degrees left: flat 300x300 mm Minimum remnant length without bundle clamping – manual 85 mm Minimum remnant length with bundle clamping – manual 260 mm Smallest diameter 5 mm Working height 750 mm Total power requirement 3.0 kW Dimensions 1450x2200x1400 mm Equipment/Accessories: - Rapid mitre adjustment from 30° to 150° stepless, digital mitre display to 0.1° - Quick material clamping: Material is clamped parallel at 90° in every saw frame angle - MEBA high-performance package version “HSS” – Hydraulic lifting and lowering of the saw frame and hydraulic clamping of the material Stepless hydraulic cutting pressure and feed regulation Display of lowering speed via scale. Cut-through display via manometer. Rapid saw frame lowering via push button to material edge - Frequency-controlled AC drive 15–150 m/min – 3 kW - Full-stroke hydraulic material clamping - Machine base with chip collection tray - Saw blade drive with limit switch - Precision saw blade carbide roller guides, saw blade brush - Complete coolant system with electric immersion pump - 1 saw blade on the machine, 4-6 TPI

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping, sawing, and lifting to the set height after the cut is completed. Stepless hydraulic control of cutting pressure and feed rate on the back of the saw blade. This ensures optimal conditions for every sawing task, i.e., constant pressure for solid material and constant feed rate for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials, and frequently changing miter cuts. The machine control complies with CE standard 89/289. Technical data: round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 This model can also be supplied with double miter capability as model 320 DG! Rapid lowering of the saw frame via push button to the material edge. Manual miter adjustment from 90° to 30°, stepless according to scale. The miter pivot point is the intersection between the saw blade and the fixed clamping jaw, thus no change in the length dimension when changing the angle. Hydraulic full-stroke workpiece clamping - CETOP hydraulic system. At every angle of the saw frame, the material is clamped parallel at 90°. Complete coolant system with electric submersible pump. Central machine operation. Saw blade drive with end-of-travel shut-off. Movable blade guide arm, adjustable to material width. Saw blade deflector rollers with carbide guide. Chip-cleaning brush, rotating with the blade. Saw blade tension with torque wrench. Dsdpfx Ajhppabjhgjkp Paint finish: silver gray / blue gray (RAL 7001 / RAL 7031). Remaining piece length: 25mm. Cutting speed: AC frequency-controlled drive, 15-150 m/min, steplessly adjustable at the control panel. Drive: Saw blade 3.0kW; 400V, 50Hz. Hydraulics 1.1kW. Coolant pump 0.1kW. Saw frame feed: Stepless up to 300mm/min, hydraulically controlled. Saw blade tension: Mechanical with torque wrench. Saw blade dimensions: 4200x34x1.1mm. Working height: 750mm (without mounting elements). Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser light Micro-spray device Clamping pressure regulator Support table on the feed side.

Condition: used, Year of construction: 2008, functionality: fully functional, MEBAeco 335 A Bandsaw Machine Technical Specifications Type: Straight cut 90° Sawing process: NC automatic Automation: Automatic series cutting Cutting range: Dsdjzdlx Depfx Ahgekp Round material at 90°: Ø 335 mm Flat material at 90°: 500 × 335 mm Drive power: 3 kW Saw blade: 4400 × 34 × 1.1 mm Maximum load weight: 250 kg/m Year of manufacture: 2008 MEBAeco 335 A bandsaw machine, year of manufacture 2008, for automatic series cutting. Cutting capacity up to Ø 335 mm or 500 × 335 mm. Equipped with NC control, 3 kW drive, and saw blade 4400 × 34 × 1.1 mm. Maximum material load 250 kg/m.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 4,000 kg, Good morning, We have a German-made Meba automatic bandsaw for sale. The machine is in virtually perfect condition. Below is a description of the machine and its features. Designed for fully automatic and efficient production in the steel industry and trade, for cutting solid materials and difficult-to-machine materials. A 2-column automatic machine for cutting at a 90° angle, with a heavy, closed design that dampens vibrations. Minimal space requirement with the highest demands and best cutting results. Technical data: Parameter Round stock Rectangular profile Cutting range: 90° ø 430 mm 430 x 430 mm Maximum machine load: 1000 kg/m Cutting length: * Single stroke: 0 - 600 mm Multiple stroke: 0 - 9999 mm Cutting speed: AC frequency-controlled drive 15–150 m/min, stepless. Adjustable via NC control. Drive power: * Cutting blade: 7.5 kW; 400 V, 50 Hz Hydraulic system: 0.37 kW Coolant pump: 0.37 kW Cutting frame feed: Stepless up to 300 mm/min Cutting blade tension: Hydraulic Cutting blade dimensions: 6220 x 41 x 1.3 mm Length of lead-in (waste): In automatic mode: 25 mm (rectangular material) / 50 mm (round material) Working height: 750 mm (without mounting elements) Weight: 4100 kg Dimensions (L x W x H): 1700 x 3100 x 2350 mm (including chip conveyor) Equipment: -Automatic chip ejector -Chip trolley -Blade break sensor -Blade deviation sensor -Zero face (material positioning) -Interface for importing and exporting data via USB memory -Material database (automatic parameter selection, >500 materials, MEBA blade selection) -Oil mist lubrication -Adjustment of clamping force -Package clamp -Receiving table -Gun for rinsing chips from the machine Dkjdpfx Ajzd Ag Sshgsp -White color -Status signal column -Central lubrication -Infeed roller conveyor 3000x500 equipped with 9 rollers We are the official distributor of the Meba brand in Poland. The bandsaw has been inspected and found to be ready for further operation for many years to come.

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW Dksdjp Rai Espfx Ahgop voltage 400 V total power requirement 5,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment

Condition: ready for operation (used), Year of construction: 1981, Round cutting area: 170 mm Dkjdjwuryrepfx Ahgjp Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Blade speeds: 150, 355, and 95 m/min Saw drive: 380 V, 0.75 kW Space required: 1400 x 600 x 800 mm Weight: 340 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, German band saw MEBA Ratio 300 -Semi-automatic -two-column -cutting diameter 300mm -max dimension 300x500 -floating speed control (inverter) -4800x34x1.1 belt -cooling systems -fast vise clamping -belt cleaning -feed auxiliary roller -feeding table (not in the picture) -German WIKUS cutting belts new 10 pcs (value about 3000 zł) -CE -net price -possible delivery to any place in the country Machine very little used like new from 2021 in perfect technical condition . SPECIALIZATION ( since 1987 on the market! ) METAL saws & Largest selection in the country Dksdpfjug Hpzex Ahgsp I have other band saws for metal of all types and bring on individual orders professional equipment from 200mm>1000mm diameter cutting material Automatic / Semi-automatic / Manual NO ! is a "Chinese" like many offered here branded professional machines !!! ONLY PROFII MACHINES !!! BE SURE TO SEE MY OTHER AUCTIONS !!! I SELECT MACHINES W/ INDIVIDUAL NEEDS ! YOU NEED A GOOD MACHINE AT A GOOD PRICE CALL

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 230 V, cutting width (max.): 407 mm, total height: 2,000 mm, total length: 1,400 mm, total width: 2,500 mm, empty load weight: 3,500 kg, cutting range round steel at 90°: 407 mm, cutting speed: 300 mm/min, saw band length: 5,120 mm, saw blade length: 5,120 mm, MEBA 407A-OV CNC Horisontal saw Djdoxz Dkyopfx Ahgokp Feeder lanes 2005 Year of make Siemens Controller Chip convoyer 5,5 kW 3,5 t L 1,4 x B 2,5 x H 2 m saw band length: 5120 mm cutting speed: 15 - 150 m/min clamping height: 10 - 407 mm clamping width: 10 - 407 mm cutting range: 407 x 407 mm cutting range round: 407 mm down speed stepless: 0 - 300 mm/min.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm Dodepcf Etopfx Ahgekp width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Dedpfjcvkalox Ahgekp Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: Dksdpfex Sr Drjx Ahgjp - Material is always clamped at right angles Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: new, Year of construction: 2025, cutting diameter 240 mm saw band length 2910 x 27 x 0,9 mm cutting width 310 mm table height 900 mm 35 + 75 m/min 1,1/1,8 kW 470 kg 800 x 1720 x 1450 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° Dkodpfx Ahewa Ui Tsgop - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Dkodpfxoup Aiko Ahgop Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Condition: new, We offer all types of spare parts for your conventional or CNC Karstens/GP cylindrical grinding machine, including components for your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed control systems—new and used—as well as reversing blocks for the Z axis on an exchange basis. Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Dkjdpfx Asraibvohgjp

Condition: used, Year of construction: 2003, cutting diameter 325 mm saw band length 4200 mm Dksdpfxjyv Ny Ss Ahgjp cutting width 500 mm 15 - 150 m/min. work height max. 750 mm

Condition: used, Year of construction: 2000, dimensions of saw-band 4200 x 34 x 1,1 mm capacity 90 degrees: round 325 mm capacity 90 degrees: flat 500x300 mm 300 mm 300x300 mm Dsdpfx Ahsyv Nwkjgjkp 200 mm 200x200 mm weight of the machine ca. 1250 kg dimensions of the machine ca. 2250 x 2100 x 1280 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown. Dkodpfx Aheq Atyzogop

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW Dsdpfxsw I Scfj Ahgokp - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: 68892, Offer 26014 Hydraulic, Two-Column Guided Mitre Band Saw Automatic Machine Technical Data: - Automatic work cycle for cutting operation, hydraulic lifting / lowering of the saw frame, manual mitre adjustment with hydraulic clamping - Automatic material feed system, motorized mitre adjustment - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed, infinitely variable: 15 - 150 m/min - Cutting pressure regulation, infinitely variable: 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: Dkodpsytn Disfx Ahgop - 30° to 90° - at 90° round: 335 mm - square-flat: 500 x 335 mm - at 45° round: 330 mm - square-upright: 320 x 335 mm - at 30° square-upright: 170 x 335 mm - Material feed automaton - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Required space (approx.): W 2300 x H 1750 x D 2200 mm - Weight (approx.): 1800 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 34 mm, total length: 230 mm, total width: 2,400 mm, saw band length: 4,700 mm, saw band width: 1 mm, Selling a MEBAMAT 330 12,500 operating hours The machine has cut 99% of plastic. Dkedpfswhix Esx Ahgep You can find the machine's technical specifications at MEBA.

Year of construction: 2012, condition: ready for operation (used), A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible. Dedju Nlk Sspfx Ahgekp

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, center height: 200 mm, workpiece weight (max.): 500 kg, grinding length: 1,000 mm, center width: 1,100 mm, grinding wheel diameter: 500 mm, As-new cylindrical grinding machine, year of manufacture 2025! TECHNICAL DETAILS Working Area Centre distance: 1,100 mm Grinding length: 1,000 mm Centre height: 200 mm Workpiece weight: max. 500 kg Grinding wheel diameter: 500 mm Grinding wheel width: 110 mm Peripheral speed: 50 m/s X-Axis Dodpfx Aowy N Udehgjkp Travel: max. 400 mm Speed: 0.001 - 12,000 mm/min Measuring system resolution: 0.0001 mm Z-Axis Travel: max. 1,070 mm Speed: 0.001 - 12,000 mm/min Measuring system resolution: 0.0001 mm Grinding Spindle Headstock Grinding spindle motor: 7.5 kW Automatic regulation of grinding wheel peripheral speed Workpiece Spindle Headstock Speed range: 0 - 500 rpm Spindle bore: 30 mm Tailstock Stroke: 50 mm Fine adjustment: ±1.5 mm Control System Control: Siemens 840 D sl MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,050 x 1,950 mm Machine weight: 8,300 kg Total connected load: 30 kW Air pressure: 6 bar