Used Hau Rks6/1.200 for sale (2,014)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Bedpfsmhh Dhex Am Rswn - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Bwedpjmhhx Ijfx Am Rjn - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm Bodpfx Ash Ek Daom Rown 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Bodemhh Anepfx Am Rewn According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Bwsdpfxjmhhf Sj Am Ren Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Bwodpfxsmhhl Hs Am Rsn Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Bodpfjmidyfsx Am Rjwn We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm Bwjdpfomkixwex Am Rjn 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Bjdemhh Dtjpfx Am Rswn - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, For inquiries about the attachment, Mr. Herden is happy to assist you (on Tel. ...). DMS RL70120 Rotator Bucket / incl. Rotator / MS03 Mount / NEW item / in stock & immediately available Bwjdpfx Asyxadaem Ron Price: €6,990.00 net / €8,318.10 gross - Weight: 217 kg - Cutting width: 1,200 mm - Volume: 220 l - Max. output speed: 9 – 10 rpm - Max. torque: 6,960 Nm - Recommended oil flow (rotation): 35 – 45 l/min - Max. operating pressure (rotation): 210 bar - Excavator class: 4 – 7 tons Optional: - MS03 Mount: €560.00 net - MS08 Mount: €890.00 net We have a very large selection of various DMS products in stock and immediately available! Mr. Herden (Tel. ...) is at your service. Upon request, we are happy to provide you with a financing offer. We are an official distributor and service partner for DMS. We are an official distributor and service partner for Westtech. We are an official distributor and service partner for Gierking GMT. We are an official distributor and service partner for OilQuick. We are an official distributor and service partner for Weber MT. We are an official distributor and service partner for Holp. We are an official distributor and service partner for Seppi M. We are an official distributor and service partner for Magni telehandlers. We are an official distributor and service partner for JCB construction machinery. We are an official distributor and service partner for Mercedes-Benz. We are an official distributor and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer you the complete DMS product range! Subject to errors and prior sale. = Further information = New: Yes Intended use: Construction Empty weight: 217 kg Contact Marius Herden for more information.

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Bwedpfxohq Txhs Am Rjn Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: good (used), Your contacts at our company: Mr: Andre Evering Mr: Mario Klöver Bwsdpfx Amjx Huh Ao Ren Mr: Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping of this item is requested, additional costs will apply, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Bjdpfohq Twyox Am Rown Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 01x Angle set, new for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Bwodpfohq Txwjx Am Rsn Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new 01x angle set, new for mounting the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep Bwjdpfxshq Tqdo Am Ren 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Material color: compl. galvanized

Condition: excellent (used), Technical data for the picking rack: Rack system: Dexion Type: HI280 Technical data for the installation: Number of rack rows: 01 pcs. Rack length: approx. 1,340 mm Number of bays per rack row: 01 pcs. at 1,290 mm Number of levels plus ground level: 06 pcs. Note: The advantage of a packing table or a picking rack is that all required tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x uprights, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. horizontal and diagonal braces Weight per piece: approx. 5.50 kg The uprights are pre-assembled Height: 1,200 mm Depth: 610 mm 06x shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x shelf beams, used Overall length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized 48x storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight per piece: approx. 0.785 kg 01x load sign With information on bay and shelf loads, manufacturer and order number Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damage, corrosion or similar may be present. Bwsdpfx Ajn Smvhjm Rjn General product information: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional charges, which can be quoted separately based on delivery location and scope.

Condition: good (used), We are offering you a second choice crash barrier for purchase. The scope of delivery includes: 01x collision protection guard rail, 2nd choice Material color: yellow/black/galvanized Total height: 400 mm Total depth: 180 mm Clear width: 1,200 mm Consists of: 01x CS Sigma profile, 2nd choice Material color: sendzimir galvanized Profile dimensions: C 300 x 75 x 2 mm Length: 1,100 mm 02x L - collision protection corners, new Material color: yellow/black according to DIN standard Total height: 400 mm Bjdpfxehpub Aj Am Rown Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The collision protection guard rail is supplied complete. delivered pre-assembled. General information about the article: This article is only available for collection. Any additional transport or shipping of this article is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x collision protection guard rail, new / used Material color: yellow / black / white Total height: 400 mm Total depth: 180 mm Clear width: 1,200 mm Consists of: 02x Sigma profile, used Material color: white Profile dimensions: C: 130 x 50 mm Clear width: 1,200 mm 02x L - collision protection corners, new Material color: yellow / black according to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The collision protection guard rail is delivered completely pre-assembled. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Bedpfx Ajvmzxcjm Rjwn General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), - 1pc. Jaw crusher Metso / Lokomo MK 120 . 1.200 x 900mm. With feed hopper . With motor . With spare parts : swing arm, flywheels, jaws, side wedges, bearings, springs etc. Bedpfx Ajlf Iqcem Rown See PDF-file below for more detailed information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Holp Verge Bucket / BL.100.120 / MS08 / 1,200 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €4,150.00 net / €4,938.50 gross - Suitable for excavators up to: 10 t - Approximate own weight: 240 kg - SAE capacity incl. cover: 245 liters - Cutting width: 1,200 mm - Total height / Verge height: 480 mm / 300 mm - The bucket is made entirely from HARDOX. Advantages of the Holp Verge Bucket: - The Verge Bucket reduces maintenance costs since it covers more meters in a shorter period. - As a specialist in well-maintained road edges, the Verge Bucket supports anyone who needs to maintain many meters of verges efficiently and economically. - The removable cover allows material to be cut not only in front of and behind guard rails but also directly underneath them, ensuring evenly maintained surfaces. - The Verge Bucket offers long service life thanks to the use of Hardox and its robust, single-sided open construction. We have many more Holp products available immediately in our warehouse! Please feel free to contact us. On request, we are happy to provide you with a financing proposal as well. Bodpfjynfk Aox Am Rjwn We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Moreover, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further Information = New: Yes Application: Construction Please contact Marius Herden for further information.

Year of construction: 2022, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (via phone ). Lehnhoff Grading Bucket / CP 10 45° / Variolock-VL80 / incl. MS08 Coupler / 1,200 mm cutting width / Year: 2022 / unused Price: €2,090.00 net / €2,487.10 gross - Excavator class: 8 - 10 t - Own weight approx.: 260 kg - SAE capacity: 290 litres - Cutting width: 1,200 mm Featuring a forward drawn blade, double-conical sidewalls, and optimized trapezoidal design, this Lehnhoff grading bucket is ideal for levelling and subgrade works. - Bevelled corners - Long, flat bottom and LH double-conical construction - Optimal penetration and fuel savings - Good emptying properties We have a very large selection of various buckets in stock and immediately available! Just contact us at / . We are happy to provide you with a financing offer upon request. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official OilQuick telehandler sales and service partner. We are an official Weber MT telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. Bodpfoyii Rajx Am Rswn We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply you with the complete Holp range! Errors and prior sale reserved! Internal no.: 302439 = More information = New: Yes Application: Construction Empty weight: 260 kg Please contact Marius Herden for further information.

Condition: used, For inquiries about the attachment, Mr. Herden is available to assist you by phone. HS Schoch brush rake / root rake / MS01 / 1,200 mm / HARDOX / available immediately / NEW Price: €1,690.00 net / €2,011.10 gross - Working width (mm): 1,200 - Net weight (kg): 100 kg - Carrier vehicle operating weight (t): 1 - 3 MS01 coupler included. The brush rake is manufactured entirely from HARDOX. We have a very large selection of various brush and root rakes in stock and available for immediate delivery! Mr. Herden (Tel.) will be happy to assist you. Upon request, we are pleased to offer you financing options. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. Bwedpfxoyhym As Am Rjn We are an official sales and service partner for Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of HS Schoch products! Errors and prior sale excepted. = Additional information = New: Yes Application: Construction Unladen weight: 100 kg Contact Marius Herden for more information.

Condition: used, Year of construction: 2023,

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, - Stack length: 2500 mm - Stack width: 800 mm - Max. stack height: 1650 mm (with pit) - Max. payload: 4500 kg Bwedpjw Ec Iuofx Am Ren - Motor drive roller conveyor: 0.37 kW - Motor drive stop ruler: 0.37 kW - Motor drive electrohydraulics: 2.2 kW - Dimensions: 2500 x 1900 x 2600 mm - Weight: 2600 kg

Condition: new, 🧰 Product Features • Condition: New • Colour: grey • Material: Metal • External dimensions: 124 x 83.5 x 97 cm • Internal dimensions: 120 x 80 x 80 cm • Load capacity: 1500 kg • Stack load: 6000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal base with wooden insert 💰 Price €149 net excl. VAT Bwedpfxsdiyhxe Am Rjn from 50 pcs. €129 net excl. VAT • Quantity discount: on request • Shipping: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Over 5000 linear metres of pallet racks from various manufacturers always in stock (Subject to change and errors in technical data, information and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)