Cantilever rack

Kragarmregal einseitig Höhe: 3.500 mm Nutztiefe: 1.200 mm / Länge: 4.600 mm

Year of construction: 1996, condition: ready for operation (used), Built in: 1996 Size max: 480 x 320 mm Size trimmed: 480 x 320 mm min 153 x 108 mm Size trimmed: max 475 x 300 mm Fpedpfxod N D Ntj Ag Ijl min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment: gathering chain & feeder three knife trimmer

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 6 station gathering track & chain • 5 feeders 370 • 1 cover folder feeder stitching unit • stitching unit 390 • wire unwind device Fpjdpfeizi Ivox Ag Ijl • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 651 kg, maximum load weight: 2,849 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 204 3500 2 NEW VEHICLE Internal dimensions: 406cm x 204cm Side wall height: 35cm Loading bed height: 66cm Gross vehicle weight: 3,500kg Payload: 2,849kg Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum capacity axles and brakes Low chassis Fully welded, hot-dip galvanized steel frame 35cm high aluminum profile drop sides with tension latches Side walls fold down and are fully removable on all sides 15mm thick, slip-resistant, durable phenolic plywood floor Automatic jockey wheel with 400kg load capacity 8 noise-reducing lashing rings, each rated at 800kg tensile strength Reinforced 13'' C-specification tires with steel valves M+S tires Net/rope hooks on frame 13-pin electrical connector Front LED marker lights Rear lamps with reversing light, rear fog lamp (NSL), and triangular reflectors OPTIONAL ACCESSORIES: PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with bracket - Without side walls (discounted) - AL-KO cable winch 12.5m - Black Edition (powder-coated black side walls and rims) - Integrated ramps, 2800kg - Steel checker plate overlay for the floor - Full LED lighting - Anti-theft lock - Fine-meshed or coarse-meshed net - H-frame - Mesh extension sides, various heights, also closed version - Additional side walls 30cm with tension latches - Flat tarpaulin with or without bows Fpedpsrk Iwnefx Ag Iel - High tarpaulin, 180cm or 200cm Further accessories available on request! Plus delivery to Gera and vehicle documents: €200 net Pictures are for illustration only and may include optional extras subject to surcharge. Have you not found the right trailer yet? We always have 50–100 vehicles in stock ready for immediate collection. Our workshop is open Monday to Friday, 8:00–17:00, for all kinds of repairs. Specialist in axle repairs, also for caravans. Wide range of rental trailers available. Additionally, we offer a large selection of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or come by in person.

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Fpodpfstu Hy Esx Ag Isl Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Fpsdjdqzbrepfx Ag Ijl Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Fedpfx Aoxtgz Esg Iepl Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. Fjdpfx Agjv Nwgne Iopl For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Fpsdpfx Agjt H Nhhj Isl Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: used, Features: Condition: fully functional, with signs of wear Ideal for rapid material transport Professionally disassembled and packed Manufacturer: Soco System Condition: Used Model/Type: Rollers Drive type: Gravity System consisting of: 7 segments (5 x 1,980 mm, 2 x 960 mm) Total length: approx. 11,820 mm Total width: approx. 470 mm Conveyor width/roller width: approx. 410 mm Fsdpfsi Dt Epjx Ag Iepl Segment length: approx. 1,980 mm Roller diameter: approx. 50 mm/rollers made of plastic Axle spacing: approx. 90 mm (adjustable) Material: Steel/plastic Information about the frame: Height: approx. 100 mm Width: approx. 25 mm Stock quantity: 11.82 meters Price per meter Roller conveyor Thanks to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide variety of industries, such as logistics, pharmaceuticals, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Year of construction: 2003, condition: used, Collection chain & feed system 6 stations 3 double underframes 5 feeders 416 Card gluer Stitching station Stitching station 410 Transfer to the right Wire dispensing device Semko Thickness control / plus-minus 3 stitching heads Three-knife cutter Three-knife cutter 304 Knife 2 carbide knives MONICS Fjdpfxoca Dktj Ag Iepl Inserter Transfer belt between trimmer and main product feeder Inserter Biliner In-line main product feeder 6 insert feeders Lay-down unit Cross feeder Rapido