Used Electro-Mechanical Pusher for sale (6,837)

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment Njdpfoyc R Uisx Amnect 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2019, Yamaha gmax g29 golfcar Bj 2019 Njdpfjy Tvvhjx Amnsct Electric

Condition: new, Year of construction: 2025, sheet width 1360 mm plate thickness 06,0 mm table width 455 mm Njdpfxexpi Dbe Amnjct work height max. 880 mm cutting angle 1°30 ° rear stop 750 mm

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Volumetric flow rate of air (normal): 540 m3/h = 9000 liters/min. Nodpfjdzqn Ujx Amnect Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded connection (air): G 2" Threaded connection (water): G 3/4" Weight of the aftercooler: 11 kg Dimensions of the aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Volumetric flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual Nsdpfx Amoy Raitenect

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Njdpfx Amsu Nfinsnoct Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch Ncjdpsu Icppjfx Amnst -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Ncjdpsu Icp Aefx Amnjt Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Ncsdpfou Icwgsx Amnot Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Ncedpfx Amju Axzkonot Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Frame press T2 RP Year of manufacture: 1986, 2.2 kW Electro-hydraulic 3 vertical and 2 horizontal press cylinders Pressing pressure adjustable 0 – 2000 kg Pressing dimensions: 2500 x 3000 mm Required space: 4000 x 950 x 2600 mm Transport available at extra cost! Due to the age of this used machine, warranty is excluded when selling to commercial customers. Nedpfxeu Rp Eio Amnoct

Condition: used, Hydro-mechanical NC machine vice, VIS - HYDRAULIQUE\nPrecision machine vice, clamp\nType 20700\nYear of manufacture approx. 2000\nJaw width 150 mm\nJaw height 42 mm\nClamping range 0 to 250 mm\nMax. opening width 253 mm\nClamping force 6 tons\nGuideway height 51 mm\nGuideway length 450 mm\n- Hydro-mechanical machine vice\n- Quick adjustment with clamping ball lock in 8-position hole grid\n- Rigid base body, precision ground on all sides\n- Can be clamped horizontally, vertically, or laterally\n- Guideway with 19 mm guide slot\n- Additional set of prism jaws included\nDimensions (L x W x H): 480 x 150 x 107 mm\nWeight: 32 kg\nGood condition Nedjy Sbxfjpfx Amnsct

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m Njdpfx Amoym D E Aensct

Condition: used, Technical details: Ncjdpfju Icn Eox Amnst sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm plate thickness: 2,0 mm Ncsdeu Icnrjpfx Amnst distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal *

Condition: good (used), Year of construction: 1990, machine/vehicle number: 8390, Offer 26135 Technical data: - Pressing force, continuously adjustable 25 t - Stroke, continuously adjustable 300 mm - Torque at the rotary shafts 6900 Nm Nsdpfxjy Tyade Amnjct - Speeds at the lower rotary shafts 4 + 8 rpm - Speeds at the upper shaft, continuously adjustable 2 - 12 rpm - Digital + analog display of actual values - Drive 400 V / 6 kW - Space requirement approx. W 1480 x H 1100 x D 800 mm - Weight approx. 1300 kg - Bending capacity when tools are available - Edges with W 125 120 x 16 mm - Straightening without straightening bar 100 m³ - Pipe (pressing process) 2 " - Ring bending (flat material, upright) 80 x 10 mm - Ring bending (round tube) 60 x 4 mm - Mandrel bending 60 x 2.6 mm - Round bending (flat) 70 x 12 mm - Bending tools: - Bending tools, pointed tools + prisms - Various other pipe bending tools, incomplete

Condition: used, Roller conveyors with chains pull 90° RA1846 Type: Transnorm 3300-600-550 Length: FL = 3300 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Nedpfxjk Abg De Amnoct We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports For individual, expert advice, simply get in touch with ply contact us by phone or will be happy to help you plan and implement your look forward to hearing from h kind regardsYour team at Dr. Sonntag GmbH & Co. KGYour specialist and contact for intralogistics Nsdpek Abm Rjfx Amnoct

Condition: ready for operation (used), Year of construction: 1998, 1 lathe VDF VM 1600 X 6000 Weight between centers: 16 t 2 steady rests Njdjy R S Hkopfx Amnjct 1 faceplate diameter 1600 mm

Condition: ready for operation (used), * Brand: Wagner * Type: electro magnetic conveyor belt * On stock: 2 pieces * 1x : length frame A-A = 1900 mm * Beltwidth: 800 mm * Driving: 1,5 kW gearbox * Dim. block: 1000 x 750 x 400 mm * Incl.: rectifier. * 1x: length frame A-A = 1900 mm * Beltwidth: 1000 mm * Driving: 3 kW gearbox * Dim. block: 1300 x 950 x 350 mm * Incl.: rectifier. Ncsdpfx Aoy D Sx Tjmnot

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min Nedpfoxd R Hmox Amnoct - Rapid traverse on U, V axes: 450 mm/min - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg

Condition: new, Trovalisier - and slide grinding machine Make: ABOAGYE Ncedpedwq Hgjfx Amnjt Model: TV 95 SL Condition: new machine Speed: 1,500 3,000 rpm (stepless) Trough inside dimensions: 498 x 384 x 410 mm Filling volume: 70 l equipped as standard with: -Timer -Water tank -Water pump -Manual

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: P260204030, Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/sieve by a paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination allows for adapting the residence time and separation efficiency. Sold with a 1000 L hopper and a flexible screw conveyor. Condition: as new (used only for testing), functional and immediately available. Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solid outlet) • Construction: 304 stainless steel • Basket/sieve: wedge wire basket (304 stainless steel) • Paddle: “expanded 7.5°” (304 stainless steel) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg • Purge air/gas (seals): clean/dry/filtered air/gas required Motor (motor plate) • Motor 3~: 2.2 kW, 50 Hz, 230 V Δ / 400 V Y • Speed: 1450 rpm (50 Hz) • Protection / efficiency: IP55, IE3 • Mounting: IM B35, service S1 Included equipment (sold with) 1) Hopper • Volume: 1000 L • 304 stainless steel, open design, “food grade” finish (Type C Plus) • Level probes: high + low • 30° outlet 2) Flexible screw conveyor • Supplier: Spiroflow Ltd • Model: 146SH Nodpfx Aoy T Hq Ajmnoct • Length / inclination: 3 m 30° • Outlet: Ø300, 30° standard • Elements: reverse bung / drop trap / QR flanges (quick disassembly) Price and conditions • Availability: immediate • Location: Martigny (Switzerland) • Condition: as new, functional • Visit / inspection: upon request

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg Ncsdsy Tw Tzspfx Amnot ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: • Hardness tester Nodjvbwzijpfx Amnjct • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear.