Mechanical lathe

EMCO compact 8

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Kodpfxjyh Hw Io Amrslu Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Year of construction: 2012, condition: reconditioned (used), Conventional Precision Lathe WEILER “CONDOR VC” With Siemens 3-axis digital readout Year of manufacture: 2012 Spindle bore: 56 mm Centre distance: 800 mm Swing over bed: 205 mm Speed range: 30 – 3500 rpm Supplied with the following accessories: Multifix tool holder Chip guard with internal lighting Kedpfxjxykz Ao Amrjlu Coolant system 3-jaw chuck Ø 200 mm Chuck guard Follow rest Ø approx. 150 mm Tailstock with retractable quill Operating manual

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Inspected and tested. Kodedtr A Tjpfx Amrolu

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW Kodpfxscdi D Do Amrelu three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Ksdpfx Aoiryyajmrjlu Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point Kedpfevzmtzox Amrelu - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Klsdpshpqquefx Amrsu Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Spindle speeds: 45-2840 rpm Kledpfx Amoy Ryrhereu Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Distance between centers: 500 mm Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray Kljdpfx Aeydk Hhsmreu

Condition: new, functionality: fully functional, empty load weight: 9,000 kg, loading space volume: 35,000 m³, tire size: 385 /65 R22,5, Year of construction: 2026, operation weight: 60,000 kg, chassis manufacturer: Lider, Equipment: ABS, 4 Axles Heavy-Duty Tipper. Lider Trailer for Heavy-Duty Trailers. Kedpfx Amjrcb N Eorslu High Quality and Durability Manufacturing. EU Standards. One-year Warranty for Manufacturing Defects. EBS or Double Line Brake Systems. Customer Requested Color. 2026 Production