Used Dalex Multi-Function System / Welding Machine for sale (97,189)

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 Bdsdpfx Akozd Rmgeqod - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), functionality: fully functional, 2 Index MS 25 E machines in very good condition and fully functional – also available individually – for sale. Bdsdpfx Ajzicxlokqod Inspection while the machines are powered on is possible.

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, – Capacity: 8 kVA Bdjdpsvbr Dlsfx Akqed – Timer – 380 V

Year of construction: 2025, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, manufactured in 2025 by the premium manufacturer Rational (successor to the VCC 211). This unit is equipped with Balance Power (reduced connection value from 27 to 21 kW). A fresh inspection has been carried out in our in-house workshop, and the iVario L is in top condition. !!! Price upon request !!! The offer does not include any accessories, but these can be purchased at an additional cost if desired. The recommended retail price for this unit is €19,976 net = €23,771.44 gross. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 21 / Hz: 50 Year of construction: 2025 Serial number: E21VK25038089215 Capacity: 100 liters Bdjdezgby Ajpfx Akqed Weight: 216 kg Condition: Used, inspected, fully functional Further details: Balance Power: reduced connection value from 27 to 21 kW Integrated 230 V socket Integrated spray hose with automatic retraction and jet dosage High-quality, seamless pan base with rounded corners Core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable Integrated spray hose on the unit, Integrated water drain in the pan Temperature unit adjustable in °C or °F Tilting cooking pan Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base unit with plastic feet Functions: Manual mode (30°C-250°C): Adjustment of liquid temperature, adjustment of pan base temperature, adjustment of oil temperature Automatic, liter-accurate water filling device Delta-T cooking Auto Lift: Lifting and lowering device (baskets for cooking and frying) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: used, functionality: unexamined, machine/vehicle number: Ultraweld-40, input voltage: 220 V, Used Amtech Ultraweld 40 ultrasonic metal welder with parts and controllers Bsdpox A A Exjfx Akqodd Manufacturer: Amtech Model: Ultraweld-40 (R4A actuator) Includes manual

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Bodpju Nv Eaofx Akqedd Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: good (used), Year of construction: 2007, shaft length: 1,064 mm, Internal article number: 26037 Laser welding machine Rofin Starweld 90 Year of manufacture: 2007 YAG laser Bedpfjy D Nlqjx Akqsdd Power: 4.5 kW Laser power: 90 W Pulse peak power: 5.5 kW Pulse duration: 0.3 - 20 ms Wavelength: 1064 mm Dimensions (L x W x H): 100 x 50 x 100 cm Measured without table and stand Weight: approx. 170 kg Unfortunately, I cannot put the system into operation because it needs to be connected to a water circuit with deionized water. Furthermore, an error message is displayed indicating that the fiber optic cables need to be checked.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bored to Ø 36 mm Bdjdpfx Akozdttijqjd 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar loader (4m bars) Accessories

Condition: good (used), Year of construction: 2001, functionality: fully functional, 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar feeder (4m bar length) Accessories Bsdszdtn Tspfx Akqedd

Condition: excellent (used), Year of construction: 2007, operating hours: 77,264 h, functionality: fully functional, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, Equipment: rotational speed infinitely variable, 6-spindle machine Bsdpfx Akjyymadjqsdd Part discharge via chute at spindle position 6 Option for polygon turning Collet holders renewed Chip conveyor Magazine IEMCA SIR MS 22 C / 33 P

Condition: used, Year of construction: 2007, functionality: fully functional, 6-spindle Hainbuch Spanntop Axfix D22 ARTIS integrated process monitoring system Slide units - Slide unit 1.1: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X-axis fixed, Z-axis NC-controlled - Slide unit 1.2: X-axis and Z-axis NC-controlled - Slide unit 2.2: X-axis and Z-axis NC-controlled - Slide unit 3.1: X-axis and Z-axis NC-controlled - Slide unit 3.2: X-axis and Z-axis NC-controlled - Slide unit 4.1: X-axis and Z-axis NC-controlled - Slide unit 4.2: X-axis and Z-axis NC-controlled - Slide unit 5.1: X-axis and Z-axis NC-controlled - Slide unit 5.2: X-axis and Z-axis NC-controlled - Slide unit 6.1: swiveling axis and Z-axis NC-controlled - Slide unit 6.2: X-axis and Z-axis NC-controlled Synchronization device, position 6.1 Part discharge via chute Workpiece conveyor belt at spindle position 6 High-pressure pump Fire extinguishing system Bedpfxsyymbze Akqedd Coolant cleaning system Hinged belt chip conveyor Flat loading magazine: IEMCA SIR MS 22/33 P

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 091600214, total width: 7,744 mm, total length: 8,408 mm, total height: 2,000 mm, feed length X-axis: 4,561 mm, feed length Y-axis: 6,856 mm, type of cooling: air, Seamless V-perfect technology welding machine, graphic representation of 19 axes, CNC controlled. No more need for edge finishing. 139,545 welded elements. External maximum welding dimensions: 4000x2800mm. Calibrated for Schüco CT70/Living 82; welding blocks not included. Bdsdpfx Akezdr D Teqed

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Bdsdpoxmd Txefx Akqod Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Bdodpfxozhgz Ie Akqed Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bdsdpfxozhpg Ts Akqed

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Bjdpfxjyzxa Es Akqjdd Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine Bodswm Iy Espfx Akqodd This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: excellent (used), Water-cooled chiller with refrigeration compressor Manufacturer: HYFRA (DALEX) Cooling capacity: 6.9 kW at a water temperature of 20°C Bdodpfx Aozg Nhbokqsd Compressor power: 3.4 kW Dimensions (L/W/H) in mm: 715 / 715 / 1375 Weight: 190 kg

Condition: refurbished (used), functionality: fully functional, welding current (max.): 400 A, Equipment: type plate available, ESS EcoMag 414 – Water-cooled MIG/MAG Note: This is a Trade-in. Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-400 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Steplessly adjustable Including PRO5000 Welding torch, earth work cable with clamp, gas cable, and +- 5 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Bdedeywatrepfx Akqed You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: A500P, type of input current: three-phase, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 8,000 mm, welding current at 60% duty cycle: 500 A, welding current (min.): 2 A, welding current (max.): 500 A, Demo OTC A500P – Water-cooled TIG ACDC Welding Machine 24-month warranty Demo Model, Ready for immediate use for manual welding or robotics. Suitable for: Robotic welding, aluminium, steel and stainless steel production welding, heavy construction, machine building. Not suitable for: On location, hobby. Specifications: 2-500A 60% ED 500A 380 Volt AC TIG / DC TIG / AC-DC TIG Pulse Synergistically adjustable Water-cooled 2/4 Step High frequency Pre gas / Post Gas Start current / end current Up slope / Down slope AC Balance / AC Frequency Pulse Frequency Spot welding Programme Memory Electrode option Includes: PRO30 8-metre welding torch, ground cable, and gas hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Bodpfx Akeyhdxxoqjdd All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Serial number: 4234 - Power [A]: 450 - Power [kVa]: 50 - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bdedpfxswyktno Akqod Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bdjdpfew N Egaex Akqjd

Year of construction: 2020, condition: ready for operation (used), A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible. Bjdpjzh Niusfx Akqsdd

Condition: used, Year of construction: 1981, Tornos 8-spindle automatic lathe, mechanically controlled Type/Model: Tornos BS 20 Bedpfxezgwv Tj Akqjdd Condition: Used Year of manufacture: 1981 Technical data Max. bar diameter: round 20 mm Max. bar diameter: square 15 mm Max. bar diameter: hexagonal 19 mm Max. machining length (bar feed): 60 mm Number of spindles: 8 multi-spindle Spindle speed: 20 stages from 620 to max. 6,035 rpm Number of cross slides: 8 (one per spindle) Production output: Max. up to 50 parts per minute Dimensions (L x W x H): approx. 2465 mm x 1200 mm x 1700 mm Weight: approx. 5,900 kg Equipment / Accessories: Retrofitted with 2 CNC slides in positions 3 and 6 Complete control cabinet overhaul Modification of the cam shaft with continuously adjustable servo drive Main spindle with spindle brake

Condition: used, Tornos CNC-controlled multi-spindle automatic lathe Type/Model: Tornos MultiDeco 20.6 Condition: used Operating hours: 45,300 h Bar stock: Ø 5-22 mm Max. part length without secondary operation: 100 mm Max. part length with secondary operation: 80 mm Spindle rotation speed up to: 4000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Counter-spindle motor power: 1.1 kW Number of numerical axes: 17 Bodpozgwtxjfx Akqsdd Axial slide: 5 Cross slide: (radial and axial) 5 (Pos. 1 to 5) Facing slide: 1 CNC-controlled secondary operation slide with up to two secondary operation tools (Pos. 7) Connection value: 35 kW Dimensions (L x W x H): approx. 8053 mm x 1508 mm x 2210 mm Weight: approx. 8500 kg Equipment/Accessories: - Control system: Tornos PNC Deko - HIRTH - Gear cutting drum locking system - Spindle stop at Pos. 4 (activated via installation curves) - 2 quick-change drilling spindles XC06020.01; GWS Modular 40004; up to 80 bar - 3 fixed drilling units GWS Modular 40004; up to 80 bar - 7 base plates for tool holders GWS 60 AD60032 (Göltenbodt) - 7 base holders for turning tools GWS 60/41 (Göltenbodt) - Bar feeder integrated: TORNOS MSF 522/6 - Material guide channel for bar feeder - CO2 extinguishing system Kraft und Bauer - Oil treatment system Knoll: VRF 500/1550 - 2 high-pressure pumps, each 40 L/40 bar - 1 pump, 20 L/35 bar - Oil capacity approx. 2000 liters - Chip conveyor Knoll - No discharge chute