Vertical tank 5.000 L

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SK02UXKP0365, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, Auction of a Zeiss T-Scan Hawk with only 20 operating hours! TECHNICAL DETAILS Maximum measuring range: 550 mm x 600 mm Ihedox Sqfnepfx Ag Ust Measuring accuracy: 0.02 mm + 0.035 mm/m MACHINE DETAILS Laser class: Class 2M (eye-safe) according to IEC 60825-1:2014 Operating hours: 20 EQUIPMENT Notebook GOM Inspect software

Condition: as good as new (ex-display), Centrifugal pump Alfa-Laval FM-1A Material: stainless steel, medium: fruit Ihodpfxshryyhj Ag Ust concentrate/fruit juice, flow rate 20.000 l/h, delivery head approx. 25m, power approx. 3 kW, speed approx. 2.900 1/min, inlet/outlet DN50 1 VA-tank, vertical, cylindrical, closed 1 VA-subframe for pump and tank

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, load capacity: 2,500 kg, throat depth: 2,500 mm, empty load weight: 713 kg, construction height: 3,350 mm, pivoting range: 360 °, Column Slewing Crane M25-2.5 TECHNICAL DETAILS Load capacity: 2,500 kg Jib outreach: 2,500 mm Height: 3,350 mm Slewing range: 360° Outreach: 2,500 mm Underside of jib: 2,980 mm Overall height: 3,350 mm Bolt circle diameter: 530 mm Flange outside diameter: 610 mm Beam flange width: 150 mm Minimum approach dimension (Aa): 420 mm Internal approach dimension (Ai): 820 mm Support column length: 1,530 mm MACHINE DETAILS Weight: 713 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V Ihedpfjx Nvtljx Ag Ujt EQUIPMENT Electric travel trolley Electric chain hoist Lifting capacity: 2,500 kg Lifting height: 4 m Lifting speed: 4 / 0.7 m/min Crane trolley Motorized travel trolley Flange width range: 138–195 mm Flange width: 150 mm Travel speed (max.): 10 m/min Travel speed (min.): 3 m/min MACHINE DETAILS Travel motor (trolley) Power: 0.3 kW Rated current: 1.2 A Starting current: 4.2 A Hoist Hoist motor power: 3.6 kW Hoist motor rated current: 8.2 / 4.3 A Hoist motor starting current: 39 / 6.7 A Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 10000987990, total height: 5,300 mm, total length: 30,000 mm, total width: 8,900 mm, load capacity: 3,200 kg, lifting height: 4,450 mm, Up for auction is a Konecranes overhead crane with 2 bridges, each offering a lifting capacity of 3.2 t. TECHNICAL DETAILS Lifting capacity: 3,200 kg Span: 8,900 mm Lifting height: 4.45 m Hoisting speed: 3.9 m/min (ASR 1.2 m/min) Trolley travel speed: 20 m/min, infinitely variable Crane travel speed: 40 m/min, infinitely variable MACHINE DETAILS Number of bridges: 2 Number of trolleys: 2 Dimensions & Weight Dimensions (L x W x H): 30,000 x 8,900 x 5,300 mm Trolley weight: 230 kg Crane total weight without trolley: 1,300 kg Electrical Data Operating/Control voltage: 400 V / 48 V, 50 Hz Rated power: 3.0 kW EQUIPMENT Runways Radio remote control Conductor rails Overload protection Load spectrum memory Signal horn Pre- and limit switches for trolley and crane travel (slow/stop) Isdpfxox Nvrzo Ag Ueht Guide rollers to reduce skewing forces Buffer extension to compensate for guide rollers

Year of construction: 2025, condition: new, Item: AV-11621-23-Vertical15m3 NEW - Never used! Vertical stainless steel tanks - 2 pcs. Exterios dimensions: Dia Ø 2435 mm Total H 4093 mm. Cylinder 396 mm. Iedpfx Ajibig Tog Uoht Vertical stainless steel tanks - 2 pcs. AISI 316

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 11690446, load capacity: 4,000 kg, lifting height: 6,530 mm, TECHNICAL DETAILS Span: 9.9 m Crane lifting capacity: 4,000 kg Lifting height: 6.53 m Lifting speed at full load: 3.2 m/min Lifting speed at partial load: min. 3.0 m/min up to max. 7.5 m/min Trolley travel speed: 20 m/min Crane travel speed: 40 m/min MACHINE DETAILS Weights Trolley weight: 390 kg Crane weight without trolley: 1,750 kg Classification Crane class: 3U4/Q2, EN 13001-1 Hoist mechanism group: 4.3 + 4.4 m / ISO M6 Crane girder mechanism group: 16 m / M5 Electrical data Power supply: 400 / 48 V / 50 Hz Rated output: 3.3 kW EQUIPMENT Radio control Overload protection Load spectrum memory Pre- and end-limit switches for crane and trolley travel Remote control type “Mini Joystick” Spare transmitter Ihodpox Nvpgjfx Ag Uot Storage cabinet Spare battery Charging station Signal horn Hook collision protection Hook center-of-gravity alignment Manual crane hook tracking Safety conductor line incl. main disconnect switch and power supply Clampable holding brackets Riser cable (fixed installation) to be provided by customer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 10000987991, overall weight: 5,110 kg, load capacity: 6,300 kg, main lifting speed: 4,000 mm/min, lifting height: 5,200 mm, 6.3t S-DG Double-Girder Overhead Crane TECHNICAL DETAILS Crane rail type: 60 × 40 Load capacity: 6,300 kg Span: 17.100 m Maximum deflection of crane bridge at rated load: 22.8 mm Ihsdpex Nvlbjfx Ag Ust Wire Rope Hoist Max. lifting capacity of hoist 1: 6,300 kg Hoist classification: 1.2 + 1.2 m (D_min) Lifting height: min. 4.9 m / max. 5.20 m Type of trolley: double rail trolley Wire rope control: with hook drift Hook type/size: RSN2.5V Speeds Hoisting speed at rated load: min. 0.08 m/min to max. 4.0 m/min CSR speed at partial load: max. 6.00 m/min Trolley travel speed: max. 20 m/min Crane travel speed: max. 40 m/min MACHINE DETAILS Weight of crane including hoist: 5,110 kg Electrical Data Supply voltage: 3 Ph / 400 V / 50 Hz Control voltage: 48 V Area of application: indoors Ambient temperature: min. 5 °C to max. 40 °C Motor Power Main hoist motor: 4.5 kW Duty cycle main hoist motor: 60% ED Trolley travel motor: 1 × 0.45 kW Duty cycle trolley travel motor: 40% ED Crane travel motors: 2 × 0.65 kW Duty cycle crane travel motors: 40% ED EQUIPMENT DynADrive inverter control Control Pro Performance 4-stage hoist limit switch Hoist brake Wire rope drum Gearbox Overload protection Load spectrum recorder Slow/stop limit switches for trolley and crane travel Crane equipped with REMOX516MI radio remote control Includes signal horn (sound level 98 dB) Includes spare transmitter for radio remote control Includes storage cabinet for remote control Rope angle features Safety festoon line approx. 30 m long, along central support row Includes mains disconnect switch and power feed at any point Rising main (fixed installed cable) to be provided by customer Note: Further technical details can be found in the attached quotation.

Condition: ready for operation (used), Can filling machine diameter 77 mm and 99 mm. VEMAG type FKF for filling in cans. Note: The byer will another machine- same as the offered for spare parts. Isdoimblqopfx Ag Uoht

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8531, Auction of a Famot MEXPOL TUM 35! Ihsdpfx Aex Ngnmsg Ujt

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 40167, Auction of a MAHO universal milling machine! Ihjdpfsx Ngkzox Ag Uet

Condition: used, Year of construction: 2022, Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor    Ihjdorziuyspfx Ag Ust

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 50 h, machine/vehicle number: 2390, bending force (max.): 100 t, stroke length: 140 mm, throat depth: 300 mm, distance between stands: 2,600 mm, overall weight: 6,650 kg, TECHNICAL DETAILS Bending force: 100 t Cylinder stroke: 140 mm Open width without tooling: 345 mm Distance between uprights: 2,600 mm Throat depth: 300 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Ijdpfx Agjx Eyv Ne Ujht Return speed: 130 mm/s Rotational speed: 1,500 rpm MACHINE DETAILS Control system: DA 66 T Oil capacity: 125 L Total weight: 6,650 kg Power: 7.5 kW Voltage/Power supply: 400 V AC Control voltage: 24 V AC/DC Operating hours: under 50 h

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Ijdpfxjx Sqpmj Ag Usht Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, color: white, overall weight: 16,000 kg, maximum load weight: 12,720 kg, empty load weight: 3,280 kg, loading space volume: 50 m³, loading space width: 2,480 mm, loading space length: 7,250 mm, loading space height: 2,750 mm, container length: 24 ft, -Year of construction: 2009-2011 -Manufacturer: Krone and Kerex -Fixed roof -Telescopic support legs -Aluminum roller shutter -Double floor -GVWR: 16,000 kg -Unladen weight: 3,280 kg Ihjdpfx Ageqk R I Nj Ujt -Payload: 12,720 kg -Interior dimensions: L=7,250 mm, W=2,480 mm, H=2,750 mm -Floor made of plywood -Interiors made of keyhole panels Several swap bodies always in stock, both Jumbo and Standard Delivery available for an additional charge Financing available upon request Images are sample images Opening hours: Mon.-Fri. 8 a.m. to 2 p.m. or by appointment Price is NET If purchasing multiple swap bodies, the price is negotiable. A VAT invoice will be issued upon sale. Location: Im Gewerbepark 11 99441 Umpferstedt

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Z-stroke: 60 mm Drilling depth: max. 38 mm Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Drill spindles: 15 Ihodex Sqm Sjpfx Ag Uot Z-stroke: 60 mm Drive: 1.5 kW Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drill chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: counterclockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: clockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Router motor Drive power: 7.5/10 kW (S1/S6 duty cycle) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid recirculation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine positions: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid recirculation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT Integrated CNC axis (360° rotational) Torque support Main spindle (motor power 7.5 / 10 kW, HSK F63) Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air connection strip with quick couplers Extraction hood for additional router motor Router 5 kW with Hydro quick-release clamping system Left-side safety guard with door Safety tread mat 3,250 mm Control cabinet left Note: For further details regarding the machine’s equipment, please refer to the attached documents.