Manual Socket Inserter

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 820 mm, controller model: Siemens 840 D, table load: 4,200 kg, spindle speed (max.): 18,000 rpm, Submitting a bid commits you to collecting the item by July 27, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,600 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 820 mm B-axis: -100 to +100 degrees Spindle speed max.: 18,000 rpm Taper: HSK-A63 Power: 0.8 - 25 kW Tool magazine: 30 slots Tool weight max.: 6 kg Tool length max.: 250 mm Tool diameter max.: 100 mm Tool diameter with empty secondary position max.: 130 mm Total weight of all tools max.: 180 kg Hodpfozkapkex Ahnofi Rapid traverse (X-axis): 100 m/min Rapid traverse Y/Z-axis: 60 m/min Feed rate X/Y/Z max.: 20,000 mm/min Table size: 4,200 x 900 mm Table load: 4,200 kg T-slots: 9 with a center distance of 100 mm MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 92 kW Dimensions & Weight Machine dimensions: 4.6 x 8.7 x 3.3 m Machine weight: 30 t Operating hours (according to the latest service report) Operating hours: 71,371 h Spindle hours: 22,527 h Number of shifts: 2 EQUIPMENT 5-axis machining with NC swivel milling head (B-axis) Linear drive in the X-axis

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21120N03100, Year of construction: 2024, operating hours: 696 h, load capacity: 1,000 kg, lifting height: 6,510 mm, free lift: 2,157 mm, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 1,000 kg Lifting height: 6,510 mm Overall height: 2,824 mm Free lift: 2,157 mm Fork profile: 80 mm x 40 mm Fork length: 1,200 mm Hfjdpfx Ahezh Hgqonoi Fork lowering stop: 30 mm MACHINE DETAILS Mast type: Full free-lift triplex mast Chassis width: 1,270 mm Load wheel polyurethane: 285 mm x 100 mm Drive wheel polyurethane: 360 mm x 130 mm Unladen weight: 2,433 kg Rated drive power: 6.5 kW Operating hours: 696 h EQUIPMENT Single-pedal control Color monitor Comfortable, air-suspended fabric seat Air-suspended and height-adjustable comfort driver's seat with fabric covering and innovative automatic weight adjustment for optimal suspension travel

Condition: ready for operation (used), Year of construction: 2021, operating hours: 288 h, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and capping system + rinser, infeed conveyor, and automatic labeling machine from the manufacturer ENOS! The machine is being sold due to a changeover to aluminum cans. The system is fully operational and has been internally maintained according to the manufacturer's instructions. Note: The seller will handle the dismantling of the machine. The buyer is only responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour Bottle format: 33cl long neck, crown cap 26mm With the same diameter of 60.4 mm, various bottles are possible (automatic height adjustment) MACHINE DETAILS Usage: 282,000 bottles filled Operating time: 288 filling hours Hodpfxjzh Dtbo Ahnofi Input voltage: 400 V Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling machine

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Hedpozgfvbefx Ahnjfi Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: not inspected (used), Year of construction: 2006, operating hours: 28,200 h, functionality: unexamined, machine/vehicle number: R2EU3804, turning length: 310 mm, turning diameter: 220 mm, rotational speed (max.): 6,300 rpm, controller model: Siemens 810 DC powerline, Submitting a bid obligates you to collect the item on time, on July 30, 2026, at 1:00 PM! Technical data: ● Control system: Siemens 810 DC powerline ● Operating hours approx.: 28,200 ● Spindle hours approx.: 6,950 ● C-AXIS & POWERED TOOLS ● Tool holder: VDI 30 ● Number of tool positions in the turret: 12 (6 of which are powered) ● Max. bar diameter approx.: 45 mm ● Max. distance between centers approx.: 687 mm ● Max. spindle speed approx.: 6300 RPM Hfodpjzlfcrefx Ahnoi ● Internal coolant line through the turret ● Chip conveyor ● Parts catcher ● 400 V / 50 Hz / 17 kVA ● Further technical data - see images Scope of delivery: ● Existing manuals, chip conveyor, collet chuck ● The tool holders are not included in the scope of delivery! Dimensions & weights: ● Installation dimensions L x W x H approx.: 3700 x 2000 x 2200 mm ● Weight approx.: 3500 kg

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0294898, functionality: fully functional, operating hours: 20,000 h, pressing force: 100 t, ram plate length: 3,300 mm, total length: 3,800 mm, total height: 2,500 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Stroke length: 3,300 mm MACHINE DETAILS Operating hours: approx. 20,000 h Dimensions & Weight Machine dimensions (L x W x H): 3,800 x 2,000 x 2,500 mm Machine weight: 8,000 kg EQUIPMENT Hodozhlntspfx Ahnsfi Tools

Condition: ready for operation (used), functionality: fully functional, working width: 1,500 mm, punching force: 28 t, workpiece weight (max.): 200 kg, sheet thickness (max.): 4 mm, working length: 3,000 mm, TECHNICAL DETAILS Maximum punching force: 280 kN Working area: 1,500 x 3,000 mm Maximum sheet metal thickness: 4 mm Hedpjzliviefx Ahnefi Maximum workpiece weight: 200 kg MACHINE DETAILS Machine weight: 15,800 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Hfsdpfxezk E A Ae Ahnoi Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm MACHINE DETAILS Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 130 t, stroke length: 250 mm, controller model: Cybelec, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Hfodpfozk E Aijx Ahnji Pressing force: 130 t Bending length: 3,550 mm Frame width: 3,050 mm Stroke: 250 mm MACHINE DETAILS Control system: Cybelec Dimensions & Weight Footprint: 4,000 x 2,000 x 3,000 mm Machine weight: 11,600 kg

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: A10587, functionality: fully functional, pressing force: 80 t, stroke length: 200 mm, throat depth: 250 mm, controller model: Cybelec DNC 30, distance between stands: 2,050 mm, TECHNICAL DETAILS Pressing force: 80 t Bending length: 2,550 mm Frame width: 2,050 mm Table width: 240 mm Maximum stroke: 200 mm Overhang: 250 mm Installation height: 450 mm Stroke speed - downwards, unloaded: 100 mm/s Stroke speed - pressing, loaded: 12 mm/s Stroke speed - upwards, unloaded: 105 mm/s Hfsdezk E Acjpfx Ahnji MACHINE DETAILS Control system: Cybelec DNC 30 Oil capacity: 250 l Machine weight, approx.: 8,000 kg