Corner cutting module

Condition: ready for operation (used), functionality: fully functional, shelf height: 5,000 mm, Auction of a BITO P4 racking frame package! The package includes the following components: 4 frames (galvanised) 18 beams 2,700 mm 18 mesh shelves 1,335 x 990 mm TECHNICAL DETAILS Load per level: 3,000 kg MACHINE DETAILS Frame height: 5,000 mm Frame depth: 1,100 mm Gjdpfx Afeyid Eronebh EQUIPMENT 4 galvanised frames 18 beams 2,700 mm 18 mesh shelves 1,335 x 990 mm Note: The image is for illustration purposes only.

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site. Gbsdpfervh Tmsx Afneh

Condition: ready for operation (used), functionality: fully functional, shelf height: 5,000 mm, Auction of a package of BITO P4 racking frames! The package consists of the following components: 3 upright frames (galvanised) 12 beams 2,700 mm 12 wire mesh shelves 1,335 x 990 mm TECHNICAL DETAILS Gedpfxjyid Dno Afnjbh Load per level: 3,000 kg MACHINE DETAILS Upright height: 5,000 mm Upright depth: 1,100 mm EQUIPMENT 3 galvanised uprights 12 beams 2,700 mm 12 wire mesh shelves 1,335 x 990 mm Note: The image is for illustration purposes only.

Condition: ready for operation (used), functionality: fully functional, shelf height: 5,000 mm, Auction of a BITO P4 rack upright package! The package consists of the following components: 2 uprights (galvanized) Gbodpoyid Akjfx Afnsh 6 beams of 2,700 mm 6 wire mesh shelves 1,335 x 990 mm TECHNICAL DETAILS Load capacity per level: 3,000 kg MACHINE DETAILS Upright height: 5,000 mm Upright depth: 1,100 mm EQUIPMENT 2 galvanized uprights 6 beams 2,700 mm 6 wire mesh shelves 1,335 x 990 mm Note: The image is for illustration purposes only.

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Characteristics: Capacity: max ~ 240000 T/pa Width: 4800 mm Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min Gbedpfxevptqio Afneh

Condition: ready for operation (used), functionality: fully functional, shelf height: 4,500 mm, Auction of a BITO P4 racking frame package! The package includes the following components: 3 frames (galvanised) 18 beams 2,700 mm 18 mesh shelves 1,335 x 990 mm TECHNICAL DETAILS Shelf load capacity: 3,000 kg MACHINE DETAILS Frame height: 4,500 mm Gedpfx Afsyidz Hjnsbh Frame depth: 1,100 mm EQUIPMENT 3 galvanised frames 18 beams 2,700 mm 18 mesh shelves 1,335 x 990 mm Note: The image is for illustration purposes only.

Condition: ready for operation (used), functionality: fully functional, shelf height: 4,500 mm, Auction of a package of BITO P4 rack uprights! The package consists of the following components: 3 uprights (galvanised) 12 beams 2,700 mm 12 wire mesh decks 1,335 x 990 mm TECHNICAL DETAILS Shelf load: 3,000 kg MACHINE DETAILS Upright height: 4,500 mm Gbjdeyidzmjpfx Afnsh Upright depth: 1,100 mm EQUIPMENT 3 galvanised uprights 12 beams 2,700 mm 12 wire mesh decks 1,335 x 990 mm Note: The image is for illustrative purposes only.

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. Gjdpfxsuc Tzvs Afnebh From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.

Condition: ready for operation (used), functionality: fully functional, shelf height: 4,500 mm, Auction of a BITO P4 racking frame package! The package consists of the following components: 2 frames (galvanized) 6 beams, 2,700 mm 6 mesh panels, 1,335 x 990 mm TECHNICAL DETAILS Load capacity per shelf: 3,000 kg Gbsdpfsyidxlsx Afnsh MACHINE DETAILS Frame height: 4,500 mm Frame depth: 1,100 mm EQUIPMENT 2 galvanized frames 6 beams, 2,700 mm 6 mesh panels, 1,335 x 990 mm Note: The image is for illustrative purposes only.

Condition: ready for operation (used), functionality: fully functional, shelf height: 4,000 mm, Auction of a BITO P4 racking frame package! Gjdpfx Aeyidwujfnsbh The package includes the following components: 4 frames (galvanized) 18 beams, 2,700 mm 18 mesh shelves, 1,335 x 990 mm TECHNICAL DETAILS Shelf load: 3,000 kg MACHINE DETAILS Frame height: 4,000 mm Frame depth: 1,100 mm EQUIPMENT 4 galvanized frames 18 beams, 2,700 mm 18 mesh shelves, 1,335 x 990 mm Note: Image is for illustration purposes only.

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine Gbodpfswclkyox Afnoh - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: ready for operation (used), functionality: fully functional, shelf height: 4,000 mm, Auction of a BITO P4 racking upright package! The package includes the following components: 3 uprights (galvanised) 12 beams, 2,700 mm 12 wire mesh shelves, 1,335 x 990 mm TECHNICAL DETAILS Godpeyidv Rjfx Afnsbh Load capacity per level: 3,000 kg MACHINE DETAILS Upright height: 4,000 mm Upright depth: 1,100 mm FEATURES 3 galvanised uprights 12 beams, 2,700 mm 12 wire mesh shelves, 1,335 x 990 mm Note: The image is for illustrative purposes only.

Condition: ready for operation (used), functionality: fully functional, shelf height: 4,000 mm, Auction of a package of BITO P4 rack uprights! The package includes the following components: 2 uprights (galvanised) 6 beams 2,700 mm 6 wire mesh shelves 1,335 x 990 mm TECHNICAL DETAILS Shelf load: 3,000 kg MACHINE DETAILS Upright height: 4,000 mm Gbedpfoyiduysx Afnjh Upright depth: 1,100 mm EQUIPMENT 2 galvanised uprights 6 beams 2,700 mm 6 wire mesh shelves 1,335 x 990 mm Note: The image is for illustrative purposes.

Condition: excellent (used), Year of construction: 2015, Stravis sawmill line with Jabłoński automatic edger after complete renovation. Condition like new. The line consists of: 1. Log conveyor for 5m logs with a cascade feeder 2. Caterpillar-chain saw 110 + 90 kW 3. Multi-blade saw (2 x 75 kW) spindle diameter 80mm 4. Roller conveyor l- 6m with a mechanism for stopping the movement of the left prism Gjdpfx Ajv Iyhfofnebh 5. Crosscut saw from 0.8 m to 5m 6. Base conveyor 7. Roller conveyor l=3.5m 8. Driven roller conveyor 4.5m 9. Driven roller conveyor l=4.0 m with a board dumping mechanism 10. Transverse belt conveyor b=3m, l=5m 11. Transverse belt conveyor with a pick-up b=2m, l=5m 12. Longitudinal belt conveyor b=0.4m, l=5m 13. Automatic edger Jabłoński 14. Gooseneck Jabłoński 15. Cross feeder with a scanner measuring the width of the board 16. Centering for the edger 17 17. Edge separator 18. Crosscutter from 0.8 m to 3.0 m 19. Gooseneck 20. Automatic stacker Jabłoński 21. Non-regenerated crosscutter Jabłoński 22. Bruks chipper with control (you need to make a belt or vibrating gutter) Assembly and start-up at the customer's premises is possible. Possibility of sending videos of the working machine before renovation. Possibility of setting the line in a turn or along the length. Optionally, construction of a base for the line. OPPORTUNITY

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, Original purchase price of the printer was €486,000 EUR net! TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly print capacity: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Gedpfeyg Eq Hsx Afnsbh Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 gsm to 350 gsm Paper weight range (when validated): up to 400 gsm Duplex printing media weight: 350 gsm MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Dimensions main unit C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like print quality Suitable for specialty and textured media In-line color management sensors Automatic calibration