Hydraulic Double-Column (Drawing) Press

400t 4 Säulenpresse Tiefziehkissen 250t

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° Ffedpfx Aoyam D Uofneu - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: new, Year of construction: 2025, material width 100 mm material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: Ffodpfxsurni Uo Afnju - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions

Condition: good (used), Year of construction: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled X/Z axes TECHNICAL DATA Turning Length: 540 mm Spindle: Motorized spindle 11/16 kW Tool holder: VDI30 with 12 AC motors - Speed: 5,000 rpm - Spindle Nose: A2-6" main spindle - Drive Power (100/40% duty cycle) 11/16.5 kW Turret: 12-station - Driven: 12 stations - Tool holder: VDI 30 EQUIPMENT FEATURES + Technology cycle for applying alternating speed for vibration-critical setups Ffsdpfx Afow Hxi Deneu + Direct X-axis position measuring system + Programmable positioning and Pressure force. + Ergonomic DMG MORl SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-side discharge instead of the chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle + Foot control pedal for tailstock + Automatic NC tailstock: Maximum machining flexibility - full force control in the range of 0.7 - 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measuring device in the work area, made by MARPOSS + Mechanical oil mist separator type AFS 600 Subject to changes and errors in technical data and information.

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Fjdpfouqdxisx Afnsfu Automation roll-off try with leveller

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: MB, MAN, IVECO, VOLVO, SCANIA etc. used rear axles, 50x available! various used rear axles for 300,- to 1.500,- EUR per piece depending on condition ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ffsdpsth T Uqefx Afnju - .

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Fedpsfv H Dkjfx Afnsfu Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel Ffsdpfx Afju Rnlueneu - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height Fjdpfx Askvnumefnefu 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2022, condition: ready for operation (used), A CNC double-spindle turning machine DMG Mori is available. Turning length: 800mm, power: 25kW/32kW, torque: 280Nm/360Nm, speed: 5000rpm, Y-axis: +/-100mm, B-axis: +/-110°, tool stations: 80, max. chuck diameter: 210mm, tool interface: HSK-A63, drawtube inner diameter: 67mm, control: Siemens 840D sl, operating hours: approx. 4786h, program hours: approx. 1937h. Including short bar loader IRCO ILS-MUK 100/16, oil mist separator and scraper chip conveyor. Documentation available. On-site inspection is possible. Fedpfxox H S I Tj Afnjfu

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 260 mm Center distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Fjdpfxeh Rvxho Afnsfu Machine light Fixed center point Set of machine mounting plates