Sheet shears LVD MVN 25/6

LVD MVN 25/6

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected power: 380V, 1.84kW Speed: 2840 rpm Number of spindles: 21 pieces, pitch 32 mm Spindle spacing: 640 mm Lrodpfx Aeh U Damjbyou Spindle rotation direction: 11x right, 10x left, M10 thread 2x safety chucks pneumatic foot valve Table size: 880 x 400 mm 1x side fence with 2 folding stops 1x base fence 1x miter fence Unfortunately, we cannot respond to inquiries that do not contain complete contact information.

Condition: excellent (used), 3-phase DC spot welding machine Ledpfxjhmvawj Abyeru DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Weight: 740 kg

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Lrsdoy Iplfjpfx Abysu Very little use Ex Pharma Facility

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Lrsdpfx Aeu Icmhebysu Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Year of construction: 2007, condition: good (used), machine/vehicle number: 12641207, Offer 23108 Technical data: Lsdpfx Ajlzif Sjbyjru - Welding current max. 550 A 60% ED - 420 A 100% ED - welding current adjustable 50 A - 550 A - 3 coarse levels + 12 fine levels - separate wire feed case with between package 4 m - 4 roller wire feed infinitely variable 0,5 - 24 m/min - 2 stroke + 4 stroke - regulation - water cooled hose package approx. 4 lfm - ground cable - pressure reducer - connection 400 V / 64 A - space requirement approx. W 550 x H 1310 x D 1050 mm - weight approx. 150 kg

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Lrodpforx Sydsx Abyou Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm Lrodpevc Amtjfx Abysu total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Lrodszka H Aopfx Abyeu

Condition: used, LVD Shear Lredpfex Tqtbox Abyou Type HST C-10/31 Capacity 3000 x 10

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm power: 15 kW Lredob N Erbopfx Abyou space needed: 4100 x 2300 x 2100 mm weight: 8500 kg