Used Narrow Track Tractors for sale (8,473)

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 1,196 h, load capacity: 2,000 kg, lifting height: 5,560 mm, free lift: 1,940 mm, fuel type: electric, mast type: triplex, construction height: 2,730 mm, fork carriage width: 860 mm, fork length: 1,200 mm, empty load weight: 6,780 kg, total length: 2,640 mm, drive type: Elektro, construction width: 1,250 mm, Narrow-aisle forklift Load center of gravity: 600 Fork width: 100 mm Fork thickness: 40 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Bandages Front tires Size: 16 1/4 x 7 x 11 1/4 Rear tires Type: Bandages Iedpju Dzt Esfx Ag Uoal Rear tires Size: 18x7x12 Battery Volt: 48V Battery Ah: 775Ah Battery year of construction: 2018 Sideshift, Full free lift,

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 2,000 kg, arm reach: 1,850 mm, controller manufacturer: ABB, controller model: IRC-5, IRB2600 on a track of 10m 2 x IRBP-L2000 4000 x 1800mm EWM Phoenix 452 Iaedsxbd Ekepfx Ag Ujl Two wirefeeders with welding gun Tool exchanger Bulls-eye Toortsreiniger Sensing with the wire ArcWelding Sensor Fence and safety curtains 2 clamping frames

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. Iasdpfjq Nfvuex Ag Usl 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" Iaedpfx Asxya Hzog Ujl 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: used, Year of construction: 2013, Robotic system consisting of: 1 welding robot Qirox QRH 390 incl. control unit, programming hand device, 24 V buffering, PC-side computer interface, 2 GB flash drive Gas nozzle sensor, arc seam tracking, point editor, Iodsx Atp Iepfx Ag Usal Qineo Puls 450 with Premium control module, wire feeder, torch hose package, welding torch, torch testing gauge, mechanical cleaning, pressure booster, Floor-mounted track 10 kN, travel length 8 m, robot installed in upright position on base pedestal. Wire drum travels with the system. 4 positioners with counter bearing WP-TC 10 kN, load capacity 1,000 kg, clamping length 3.0 m, rotation radius 1 m Connection control, 4 light barriers, 4 prestart selectors, Delivery: immediately available. Special price for purchase by 15.12.2025! System will be cleaned, tested, and serviced prior to dismantling. Warranty: functional guarantee Very low operating hours

Year of construction: 2008, condition: used, Year of manufacture: Feb 2008 New: No Serial number: many we have some used terminal tractors for sale wich can be used for parts, the trucks are in working condition. Iedpfxovz S Rls Ag Usal

Condition: good (used), functionality: fully functional, Paint mist extraction system/suspension rail - incl. suspension rail, dimensions: approx. 10000 x 7000 mm - incl. various hanging brackets, paint trolleys, and a paint mist extraction unit - extraction unit dimensions: 3000 x 1000 mm Note: The item must be picked up bindingly between 18 and 26 February 2026 on a date to be agreed. FCA D-78087 Mönchweiler – loaded onto truck Iajdpfex T Amyox Ag Usl

Condition: used, functionality: fully functional, machine/vehicle number: 6117, Year of construction: 2012, operating hours: 2,416 h, load capacity: 2,000 kg, lifting height: 5,020 mm, fuel type: electric, mast type: triplex, construction height: 2,540 mm, drive type: Elektro, Narrow-aisle forklift truck Chassis number: 6117 Mast type: Triplex Gearbox: Automatic Technical condition: normal Isdpfsx Tmz Uex Ag Ujal 3rd valve, 4th valve, roof cover, windshield, half cab, - side shift - telescopic tines - non-marking tires - work lights - rotating beacon

Condition: ready for operation (used), functionality: fully functional, mileage: 54,319 km, power: 75 kW (101.97 HP), first registration: 12/2010, overall weight: 5,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 2,360 kg, empty load weight: 2,640 kg, next inspection (TÜV): 01/2027, fuel: diesel, gearing type: hydrostat, emission class: euro5, loading space width: 1,250 mm, loading space length: 1,800 mm, loading space height: 300 mm, operating hours: 5,420 h, machine/vehicle number: OL127, Equipment: all wheel drive, cruise control, differential lock, hydraulics, soot filter, Multicar Tremo X56 narrow-track vehicle including Kugelmann Vario snow blade type V150 including Kif municipal technology spreader type rear-mounted spreader From 1.Han = former municipal / government vehicle large engine inspection with timing belt, water pump, oil and oil filter on request NEW! Approved. as a special vehicle equipment carrier 50 km/h Iasdpov Ax Erjfx Ag Uel VW 2.0 TDI industrial engine (4 cylinders) Low emissions Euro 5 EEV Diesel particle filter Large municipal hydraulics 5420 total operating hours 2654 working operating hours 54319 kilometers 4x4 all-wheel drive can be switched on 4x4 all-wheel steering can be switched on Gas inch driving function (like cruise control, perfect for spreading/pushing) Joystick control Differential lock Cover for flatbed and spreader 2x trailer coupling 3,500 KG braked trailer load Front coupling triangle + additional attachments (see pictures) 8 tires 1 set of M&S wheels + 1 set of all-terrain wheels (perfect for rough terrain) ISRI Comfort suspension seat for driver Payload 2,360 kg Empty weight 2,640 kg Total permissible weight 5,000 kg The spreader is powered by the machine's hydraulics Ready for use We sell exclusively in accordance with our terms and conditions and without any warranty. Errors, changes and prior sale reserved We are available for you Monday - Friday from 9 a.m. to 5 p.m. and Saturdays by appointment; outside of these opening hours, appointments can be made by telephone. We are happy to accept your current used device/vehicle as payment. Sales to traders and exporters are given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale are subject to reservation!

Condition: used, Year of construction: 1998, operating hours: 15,030 h, CE mark: yes Serial number: EC200V0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22096 Specifications: 1998 model Hours: 15,030 Weight: 19,300 kg Power: 107 kW Central lubrication system Undercarriage (see photos) Track width: 60 cm Overall width: 290 cm S70 mount above tilt, KM1 below Rototilt from 2004 Narrow bucket Owned for 16 years Climate control / AC Video available Ready for delivery Isdpfx Agjx Nl N Ae Usal   Notes: Broken wire to the rototilt Starts to roll at high speed Hours: 15030 Own weight: 19300 Width: 290 Kw: 107 CE: Yes Model: 1998 Volvo EC200 Beltegraver m/ Rototilt og Smalskuffe

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock. Iaodpfxjwhxiaj Ag Ujl

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, empty load weight: 2,150 kg, lifting power: 980 kg/m, lifting height: 2,500 mm, tire size: 31X15,5-15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 980 kg, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With its high lifting capacity, the HR 2210 loader can lift even heavy loads of up to 980 kg to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the HR 2210-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-B35 Wheel Loader • Fully equipped • Wide track for greater stability • Extensively optimized in Germany • Includes manually adjustable pallet forks • Includes standard 150 cm bucket • Comfort cab with heating, ventilation, and radio • Rearview camera with display • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for trailer use • Rotating beacon Ijdpfjrhh Sqex Ag Ueal • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 € Gross: €27,304.55 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria for an additional charge Technical specifications Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lift height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm (standard bucket tipped) Lift time / lowering time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories are available from us. Please provide your telephone number when making inquiries!

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Isdpok Aa Txsfx Ag Uoal Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, roll diameter: 60 mm, roll pitch: 156 mm, total width: 952 mm, total height: 465 mm, total length: 10,000 mm, For sale are two gravity roller conveyors for Euro pallets (1200x800mm). Condition and functionality are excellent; sale only due to reorganization of the warehouse. - Special coating: RAL 5010 / RAL 1021, the rest is galvanically galvanized. - Fully equipped with brake rollers to ensure gentle "arrival" of the pallets. - Pallet infeed height: 465mm - Pallet outfeed height: 65mm (ground level) - With automatic pallet separator - Removal possible with both hand pallet trucks and forklifts. Price is net per conveyor. Ijdpfx Agsw Rz Rke Ueal

Condition: excellent (used), Catalogue number 7864 TECHNICAL DATA - Track width: 300 mm - Shaft working width: 310 mm - Max. disc diameter (currently fitted 300 mm): 350 mm - Bore diameter: 70 mm - Maximum cutting height: 120 mm Iodpfox U Tqxex Ag Uoal - Table width with extension: 750 mm - Table length: 1540 mm - From above: - Kickback pawls - Metal sliding roller - Kickback pawls - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - From below: - Guide rail - Kickback pawls - Track - Central track lubrication - Stepless feed speed adjustment - Feed motor 1.1 kW - Main motor 26 kW - Extraction nozzle diameter 200 mm - Overall dimensions (L/W/H): 1800x1350x1450 mm - Weight approx. 1700 kg ADVANTAGES – Italian made – Very good condition – Used multi-blade saw Net price: 37,900 PLN Net price: 9,000 EUR depending on the rate of 4.2 EUR (Prices may change due to market fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 1,500 kg, lifting height: 9,000 mm, construction height: 5,900 mm, Equipment: cabin, pallet forks, Offered here is a very narrow aisle forklift by Linde, manufactured in 2023. The machine is in new condition and is currently not in use. From a safety perspective, the machine meets the latest standards. It still needs to be assembled before being operational. Mast - Linde standard clear view mast - Heavy-duty, with a maximum load capacity of 1500 kg - Lift height: 9,000 mm - Gripping height: 11,060 mm - Mast height: 5,900 mm Fork carriage - Side-shifting fork carriage for maximum aisle width - Aisle width (AST): 1,870 mm - For manually adjustable forks (50 x 120 mm) Fork dimensions - Forks for side-shifting carriage, cross-section 50 x 120 mm - Fork length according to load dimensions (range: 800 – 1,400 mm) - Lowered height h13: 60 mm Iajdpfx Agjxc Eddo Usl An inspection of the machine is possible upon request and by appointment. If you have any further questions, feel free to contact us.

Condition: used, Year of construction: 2019, functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Robot 1 single-wire tandem welding equipment with automatic torch change system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m, 1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct Iaodpfxewgd Hze Ag Usl Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.

Condition: used, mileage: 488,900 km, power: 315 kW (428.28 HP), first registration: 06/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 4,600 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,100 mm, Equipment: ABS, air conditioning, all wheel drive, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Volvo FM420 4X4 X-Track chassis Mileage: .900 km with documentation Euro 6 emission standard 420 HP engine with 12,777 cc displacement X-Track 4X4 hydro-drive Terberg short cab I Shift transmission retarder air conditioning tow coupling lane keeping assistant weight variant 21,000 kg axle loads 8,000 kg / 13,000 kg full air suspension Isdpfovik U Eox Ag Uoal wheelbase 4,600 mm frame length 6,100 mm tyres 315/70R22.5, tread approx. 50% export/ net price: 32,900 euros All information without guarantee, errors excepted.

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1 Deflection roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of construction: 2001 Ijdpok Abdpjfx Ag Usal Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: limited functionality, load capacity: 1,000 kg, lifting height: 7,000 mm, Equipment: cabin, head guard, Offering here is a Linde high-level order picker. The order picker was taken out of operation two years ago due to the purchase of new equipment. The battery is now fully discharged and must be replaced. Apart from the defective battery, the order picker is fully operational. The platform can be removed, allowing for pallet transport as well. Important: The battery is defective and must be overhauled or replaced! A loading ramp is available for loading. The costs for dismantling the mast and preparing the machine for transport are borne by the buyer. Technical specifications: Manufacturer: Linde Model: V10E01 Load capacity: 1000 kg Ijdpfx Agex N Axbj Ujal Battery weight: approx. 900 kg Year of manufacture: 1992 Unladen weight: approx. 3,300 kg Battery voltage: 48V The order picker is being sold due to excess stock.

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers Isdpfx Agoxvb Hzs Uoal From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 926 h, Aisle Master 20S Articulated forklift Serial: 30870 2016, gas, capacity 2000Kgs, lift height 4750mm, 3 stage full free lift mast, side shift, only 926 hours on the clock Iaedpfjv Ipdijx Ag Uel

Condition: new, Year of construction: 2024, Training system consisting of: 1 welding robot Qirox QRC 350 including control unit, programming handset, 24 V buffering, computer interface (PC side cabinet), 2 GB flash drive Gas nozzle sensor, arc seam tracking, multilayer welding technology, spot editor, Qineo Next 452 with premium control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, Floor rail 20 kN, travel path 6 m, robot is mounted on a C-frame in suspended position. 2 turning device with counter bearing TC 5 kN, load capacity 1000 kg, clamping length 3.0 m, interface control, 4 light barriers, 2 start preselection Delivery time: 6–8 weeks Warranty: 24 months Isdpecmbnyjfx Ag Uoal

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1 Deflection roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Iasdpfek Abgvjx Ag Uol For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Ijdpsk Aa Ugofx Ag Ueal Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum(AT): Ø = 64 mm Belt: Type HSL-8E Year of construction: 2001 Characteristic / Accessories: Design as folding belt possible on request Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics