Spraying gun

LS Airless

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute Bsdpoxv Dkcsfx Agzsld - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Blsdpfx Agjq Dzkuozjd Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Year of construction: 2013, condition: excellent (used), Gas burner Weishaupt WM-G10/3-A We have 8 of them in stock Power 630Kw-1200kw 2x year : 2007 WMG10/3-A 2x year : 2010 WMG10/3-A 1x year : 2011 WMG10/2-A 1x year : 2011 WMG10/4-A 1x year : 2009 WMG10/3-A 1x Bj : 2013 WMG10/3-A Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Bljdpsi Atp Ssfx Agzod Of course we also take care of all formalities Loading possible

Condition: like new (used), Year of construction: 2025, Portalkran 2x125 ton 30 Meter Hubhöhe Baujahr 2014 Bjdpjgmdnfefx Agzsld

Condition: as good as new (ex-display), Year of construction: 2023, newly arrived air cooled chiller, 3,6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, machine is perfectly suitable for smaller chilled water supply of process applications. Compact design, simple control. Bsdpofy Rycefx Agzsld

Year of construction: 2007, condition: used, Record Scorpion MEC. SP. Compact good condition flow packer. Key features Bsdpfxjmymi Tj Agzeld - New condition - Very compact compared to most other flowpackers, Only ±290 cm long, very easy to integrate. - Bottom seal - Very easy to set-up and run Optionally with additional infeed device.

Condition: excellent (used), Ball mill Vollrath EFC 200 Wet and dry grinding Iron-free grinding with steatite balls Lining hard porcelain Volume 200 l Drive power 1,4 kW speed 42 1/min 3 ball mills each mounted on steel construction Bsdpfx Agek D Dwtjzeld Very good ready to use condition, directly from production!!!

Condition: good (used), Automatic ROPP Capper Make: Bertolaso Typ: Automatic ROPP (pilfer-proof) Capper Model: Alfa 110-VH40 speed: Up to 2.000 caps/hr Dimensions: L x W x H = 1.800 x 800 x 1.800 mm electric: 380 Volt – 50 Hz Tooling: Customer choice Features:Included cap sorting as-is or adjusted to customer needs Bedpfx Agjg Dvfwozsld

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch Blsdpsd Hxx Aefx Agzed - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. Bjdpfsxufbtsx Agzsld General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.