Guillotine Shear

Lotze 252.4000x5

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Lhsdporfx Utsfx Al Ish Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW Lhodpfx Aou Rni Hel Ijh weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Year of construction: 1999, tube diameter bis 60 mm Lhedpfxevvnm Sj Al Ijh weight of the machine ca. 1,8 t

Condition: new, table diameter 330 mm Lhodpfx Aleh D Svce Ieh table load 220 Kg swivelling range 135 Grad tilt adjustment: manually/mechanicall manuell turning speeds max. 5 U/min stufenlos table load capacity 100 kg. vertikal total power requirement 0,125 kW weight of the machine ca. 48 Kg dimensions of the machine ca. 640 x 440 x 630 m

Condition: used, Year of construction: 2009, sheet width 3050 mm plate thickness 6 mm rear stop 10-1000 mm cutting angle 0,5 - 2,5 ° down holder 20 Stk no. of strokes 14 - 23 Hub/min work height max. 900 mm oil volume 140 l total power requirement 11 kW dimensions of the machine ca. 4000 x 2150 x 1900 mm weight 7800 kg Equipment: Lhsdoyk Dhxspfx Al Ijh - ELGO control unit type P50 - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - operating instructions Special equipment: - Return to transmitter (sheet metal output to the operator) - Scrap switch - Angle stop 0-180

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical specifications: - Load capacity approx. 200 kg Lhsdpedd Ilxjfx Al Ish - Outreach 800 mm - Working height in horizontal position approx. 1000 mm - Boom arm can be rotated to the left and right by motor - Boom arm can be tilted manually - Grinding wheel can be rotated to the left and right by motor - Grinding wheel speed can be adjusted continuously - Grinding wheel diameter 300 mm - Swiveling control panel with ESAB control unit, - Type 6 PTF, year of manufacture 1997 - Space required approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Swing over bed: 660 mm Swing over cross slide: 420 mm Swing at offset: 870 mm Between centers 2000 mm Spindle bore: 103 mm Speed: 36 - 1600 rpm Spindle power: 7.5 kW Weight: 3200 kgs Dimensions (L x W x H) = 3635 x 1050 x 1450 mm Equipment, accessories - 3-axis DRO system - Steady rest - Travelling rest - 3-jaws chuck, 315 mm diameter - 4-jaws chuck, 500 mm diameter - Face plate - Rapid traverse on all axes - Coolant system Lhjdswwt Szepfx Al Ioh - Chuck guard - Splash guard - Foot brake - Low work lighting - Manual

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Lhsdpfx Aljxq Eyuo Ieh

Condition: excellent (used), Year of construction: 2001, pressing force: 150 t, stroke length: 265 mm, throat depth: 330 mm, Hydraulic press brake Fab. Plague guy. QPB-M6 Year of manufacture 2001 Technical data Make: Placke Type: QPB-M6 Year of manufacture: 2001 Pressing force: 150 t Bending length: 3100 mm Thrust: 330 mm Push stroke: 265 mm Installation height 665 mm Connected load: 16 KW Rapid traverse 150 mm/s Working speed 9.8 mm/s Retraction 100 mm/s Operating pressure 300 bar Dimensions: L 3.4 x W 2.0 (+ support arms) x H 2.9 mm Weight: 10.5 t Equipment - Control: Delem DA65 2D graphics Lhjdpfx Aovw Trisl Ijh - 4-controlled axes: X, R, Y1, Y2 - 2x support arms, can be moved sideways and in height adjustable - 2-hand control panel - Hydraulic upper and lower tool clamping - CNC-controlled crowning, WILA - Tool package: Upper tool straight, H 160mm, L = 2,700mm, sectioned Lower tool V15, L = 2,400mm, sectioned All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW Lhedpfsvuz Tpsx Al Ieh dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions