Automatic band saw 90°

AMADA HA 400 W

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested. Dkjdpfxoul Svls Acner

Condition: used, Year of construction: 1995, cutting diameter 260 mm saw band length 3830 x 27 x 0,9 mm cutting range flat 310 x 260 mm cutting range square 260 x 260 mm cutting speed stufenlos 19-110 m/min feed length 750 mm multiple feeding length 6750 mm Dsdswhqxmopfx Acnskr height of material-table 700 mm weight of the machine ca. 1,4 t dimensions ca. 2100x2300x1720/1300 mm incl. several band saw blades incl. chip conveyor

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Dedpfx Acorz Rw Renekr Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: ready for operation (used), Year of construction: 2015, A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible. Djdpfjynlu Uox Acnskr

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment Dedjx D Nd Dspfx Acnokr • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Djdeyfnqgspfx Acnjkr Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-position turret VDM 40 - C-axis

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Dksdpeunt Ihefx Acner Cabin, tool holders,...

Condition: used, Technical details: Tool holder shaft type: BT 40 Tool holder shaft type: Futter / Chuck Tool holder shaft type: Weldon Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Chucker etc. available. See pictures. * Dkjdpevfdr Nefx Acnor

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 3273, Neff - internal broaching press Dsdpfed N Rl Njx Acnokr machine type: vertical hydraulic broaching press manufacturer: Neff Germany type: 16 SRKA built in: 1977 stroke: 1300 pulling force: 16.000KG working stations: 1 PCs drive: hydraulic system equipment: coolant system remark: machine under power in stock Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Condition: like new (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, Machine type: CNC turning and milling center Manufacturer: DMG MORI Type: NLX2500SY/700 with Fanuc industrial robot, type R2000ic/165F Year of manufacture: 2018 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: upon agreement Incoterms: EXW Additional information: CNC turning and milling center Dkodpfxjzcpkis Acnjr DMG MORI NLX2500SY/700 Turning diameter max. 356 mm Turning length 705 mm Control system: M730 UM Mapps CELOS Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 4,000 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore 80 (91) mm C-axis: 0.001° Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle bore 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse rate (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 12 Shank height for square tools: 25 mm Shank diameter of drills: 50 mm Tool change time: 0.27 sec. Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 4.2 kW Total power consumption: 41 kVA Machine weight: approx. 6.4 t - Counter spindle - Tool drive - C, Y-axis Subject to errors in technical data. The scope of the accessories is exclusive and limited to the description in the text. No claims can be made regarding additional accessories shown, e.g. for illustrative purposes.